КОМЕНТАРІ •

  • @nickanrc
    @nickanrc Рік тому +1

    Cool le branchement direct en XT60 !!!

    • @ArthurRC
      @ArthurRC Рік тому

      Yes vraiment bien !

  • @collinmccallum
    @collinmccallum Рік тому +1

    excellentes informations. Liked!

    • @ArthurRC
      @ArthurRC Рік тому

      Thanks a lot !!!! 🙏🏻🙏🏻🙏🏻

  • @michelg3575
    @michelg3575 Рік тому +1

    Merci pour les explications, c'est toujours très bien fait. 👍

    • @ArthurRC
      @ArthurRC Рік тому

      Ravi que ça te plaise merci beaucoup 🙏🏻🥰

  • @moniquejanin-hm5ow
    @moniquejanin-hm5ow Рік тому +1

    Toujours aussi intéressant

    • @ArthurRC
      @ArthurRC Рік тому

      🙏🏻🙏🏻🙏🏻🥰

  • @FCFCustom
    @FCFCustom 8 місяців тому +1

    Super vidéo! Est-il nécessaire d'utiliser "DisCharger BD350" pour décharger ses accus ou le chargeur en lui même suffit à décharger les accus? Est-il bruyant au niveau du ventilateur? Merci d'avance

    • @ArthurRC
      @ArthurRC 8 місяців тому +1

      Il faut les deux oui…le déchargeur fait un petit peu de bruit mais ça va 😊

  • @hnuta3
    @hnuta3 11 місяців тому +1

    It is only 350 Watts. Even the 20 Amps were not reached. All in all a good presentation. Only the adverts sucks. Is this worth it?

    • @ArthurRC
      @ArthurRC 11 місяців тому

      …that’s an awesome charger and the fastest I have…

  • @piloto300
    @piloto300 Рік тому +1

    Great video! Many thanks! Do you use the temperature sensors?

    • @ArthurRC
      @ArthurRC Рік тому +1

      Hi thanks a lot !!! No I don’t watch the temperature….

  • @alexandretaha
    @alexandretaha 3 місяці тому +1

    Bonjour, je vous remercie pour cette vidéo. J'ai une question concernant la décharge : le maximum de 3,4v pour des lipos étant trop bas, est-ce qu'on peut décharger aussi rapidement en mode storage ?
    Merci d'avance pour votre réponse

    • @ArthurRC
      @ArthurRC 3 місяці тому

      Oui oui bien sûr je met en storage et ça va hyper vite 🥳🥳🥳

    • @alexandretaha
      @alexandretaha 3 місяці тому +1

      ​@@ArthurRCmerci, je n'attendais plus que ça pour en commander un. J'ai pour le moment un D260

    • @ArthurRC
      @ArthurRC 3 місяці тому

      @@alexandretaha excellent ! Tu peux passer par mon lien affilié www.turbines-rc.com/fr/?aff=4

  • @The_Absurdistt
    @The_Absurdistt Рік тому +1

    Can the BD-350 be used as a stand-alone discharger?

    • @ArthurRC
      @ArthurRC Рік тому +1

      Unfortunately not

  • @Ev0ltion
    @Ev0ltion Рік тому +1

    Hi, i have a question for you. Is your charger emitting a high pitched noise when not under load?

    • @ArthurRC
      @ArthurRC Рік тому

      Hi 👋🏻 mmmmh I don’t think so….

    • @Ev0ltion
      @Ev0ltion Рік тому

      @@ArthurRC yhanks for info it seems mine is damaged. Warranty that is 🥺

    • @ArthurRC
      @ArthurRC Рік тому

      @@Ev0ltion oh not cool 😫

    • @Ev0ltion
      @Ev0ltion Рік тому +1

      @@ArthurRC Nother youtuber i asked has the same issue as i do. Prehaps there was drop in quality on skyrc side.

    • @ArthurRC
      @ArthurRC Рік тому

      @@Ev0ltion oh that’s strange 😫😏😕

  • @BlackThunderRC
    @BlackThunderRC 2 місяці тому +1

    The inability to manually calibrate this is frustrating. As it always overshoots on voltage on a full charge by 150-200mv.

  • @beenflying1
    @beenflying1 6 місяців тому

    Don't waste your money on the BD350. The D200neo is hopeless at discharging and you will not use it. The storage discharge is a fixed 3.80 volts and it cuts off the moment one cell hits 3.80, which leaves the battery with too much charge, and the discharge cycle has a max voltage of 3.4 volts, which is too low for normal use as most LiPo batteries say no less than 3.50 volts. I understand the T1000 is sadly the same. This is quite a failing by SkyRC and needs to addressed with a software update! I know other reviewers have comment to SkyRC about this

    • @ArthurRC
      @ArthurRC 6 місяців тому

      Well…if you wish 😇😇