Good job on this video Heath. That adjustment is the unloading valve. Trying to run too much flow at high pressure kills the engine. Unloading that high volume gear set allows it to build pressure without stalling. Wolfe Ridge machines have the adjustment in the same location as the EM, and they are fully tightened and then set 1.5 turns out CCW at my shop... Just so you Wolfe Ridge guys have a good base line. Just make sure not to set this adjustment too high as it can cause damage to the engine long term.
Thank you Chris, I was actually researching this more today and learned how the unloading valve works. Pretty neat. I plan on doing a follow up video and appreciate the information, I’ll pass it along. Also going to pin this comment so Wolfe Ridge owners can see it as I didn’t have a WR to show in the video.
Thanks for the explanation Chris, and thank Heath for putting this video together, you did a great job showing the comparison. I have a WR 35 SHO, with 7 hours, so I doubt it has slowed down much, but I’m definitely going to save this video for later down the road. Thank you and have a great weekend Around the Yard! - Brent
Thanks Brent. Yeah my guess is that after time maybe the spring gets a little weaker and needs to be adjusted but as Chris mentioned I’m sure most of the commercial companies set them correctly before shipping them out.
Months later, I'm looking at this again, and it's still pretty dang cool. I had a 2 stage long ago. It was so bad, I threw it away. Wish I'da known about this back then!@@hardworkingmanoutdoors
Omg! I knew I had a problem, my 2nd stage was starting way to early, l had no idea it was adjustable was thinking that my pump was going bad. I love your videos. Thank you so much
Heath I have to give you and all these content creators props for doing videos to keep us entertained , theres no way I could do it this time of year. Big reason why not yesterday it got up to 115° and it's supposed to be even hotter today , think i'll fill my bathtub , add a fan and just soak all day😂
Im here watching you from Australia, and then you pulled out an Australian chainsaw product! Hope it works like a dream, and your property is amazing. Beautiful countryside. Wood splitting can be mesmerising to watch for some reason.
Something new, I’m going to try to adjust my Iron and Oak the same way. I’ve had my machine 20 years without knowing how to adjust. This should really make a difference.
Great informative video. I have just purchased a used 12-22 as well and will be paying a closer attention this to see if I need to make an adjustment or not
You are going to love it. On other thing I had to adjust was the autocycle kick out pressure as that had loosened up over time as well. If it kicks back too easy it may need to be adjusted. This is pretty simple as well.
nice saw I have the twin. 10mm 044 I got it late 80s early 90s I do have a ms400 both are great. I have had many people try to buy 044 when they see a one owner sweetheart only used to trim rose bushes at the local church! lol
I just have a regular "Ma and Pa" Speeco splitter. My wife and I (if we're together) can split a full (3 stoves) cord in about 3-4 hours. Usually all gnarly Oak and Elm. LOL. Always knew the valves could be adjusted but never had it explained. I've got a hell of a lot of hours on it but it seems to "shift gears" appropriately. But still nice to know. The cycle rates on my kind of machine are painfully slow particularly after watching all of these challenge videos and seeing the "pricey" machines you all run. Its a lot more work and time with my machine but I'm getting older and only "process" wood for myself. I wear out so fast these days, I think I'm finally catching up to the speed of my machine.....meaning, I slowed down enough for us to work in simpatico together. LOL, Love the videos and the challenges particularly. It's great to see good 'ol family content of couples working together to accomplish a shared goal. Its so much better than the lives most of us lead.......going our separate ways to work each day to meet up at the end of the day, too tired, ornery, or busy to show each other appreciation. It's wonderful to see the two of you literally and figuratively working together and enjoying each other. Give Thanks, because (yes ya gotta work at it, but) it's a Gift. Thanks.
Thank you! We appreciate the feedback, and yes it is work but also such a blessing to be out there with the family. Sounds like your Speeco has served you well!
good video years ago my dad had me turn up the pressure on a industial tractor loader and hoses started blowing out so i had to turn it back down i think it only had single stage pump. just be careful turning up pressure. Rachel yous good in saw dust. take care, be safe and well.
Yeah, that could be dangerous for sure. This doesn’t change the pressure, just changes the pressure that it switches to stage 2. If you set it too high it will simply stall your motor in stage one before kicking to stage 2.
Definitely Alan, I know a few have mentioned it on our channel but know a lot of people haven’t heard it yet so I figured it helped me out it may help out others. One thing I love about having a channel and this community. Always learning and willing to help.
@hardworkingmanoutdoors the wood wagon is working out great. It definitely allows me to be more productive with my time splitting. I did have an incident with it today. Next Sunday's video shows what happened.
Yes they do have one. I just went through the process a couple weeks ago and can’t find the video I watched that explained the process. There’s nothing wrong with all my pump is adjusted. But the hoses absolutely suck based off of size.
@@hardworkingmanoutdoors Probably need a better hose system that they do a pump adjustment. I know on my splitter, I’ve benefited better from the hose. Now with the pressure gauge in it, I realize I do not have to adjust the pump. My transfer pressure is 800 psi in my deadhead pressure is 3600 psi.
Nice video Heath. I’ve adjusted kick out pressures on my valves, but have never adjusted pressure on the pump. I’m going to check my Wolfe Ridge 28C to see if the pump is going into 2nd stage too soon. Great information!
hi there good show , thats what makes mine so fast .it only has one stage , but not very strong . could up grade the pump but after 50 years i think i will be fine . john
Thanks John, the single stage pump’s definitely are fast but don’t have that second stage power for sure. Usually not needed but can come in handy. A giant engine and single stage would be the best of both worlds.
I'm probably one of few people that know about it. As it was part of my hydraulics class in diesel tec school. . But otherwise yes, very good example of how to adjust it.
@hardworkingmanoutdoors i had that happen to me with my 12 22 Easton Made the first week i owed it. There's not much space for a guard on it. The all wood looked like it had room for it
Really helpful. Thanks for sharing. Now is there away to actually know if your getting the correct tonnage of pressure according to your cylinder size. Or what that sticker is actually advertising. That wood be a interesting video to watch.
Thank you, I am not sure about measuring the tonnage. I’d imagine you’d need some type of machine to actually measure the force. Other than that you could probably use match with the inline pressure gauge to calculate what it should be.
@hardworkingmanoutdoors you may not know about disc cleaners but you helped me fix my problem.. the pressure changed some how.. I adjusted and it works better than new.. thanks
Awesome, glad we could help. That’s what it’s all about, helping each other out. We learn a lot through the channel and try to share what we can with others.
that's like us, I can grab 3/4 pound or 1/2 lb of ham, turkey, RB, every time. I bet your logs are 14". Kinda a dumb comment.. but. The tool that burns twice as fast, burns half as long! Taken from 'Blade Runner' 1982 film. That's cool, adjusting your equipment!
Oh ok... it's been a number if years since I've been in the woods! I didn't realize they have something like that! Thanks for the information! Great Video bud! GOD BLESS YOU!! 😊🙏🏻❤️🕊
Man, that wood was a “Beech" to split 😂. I’ll be here all day… Good tip though. I was going to say that you’ll have to change the channel to Harder Working Man now, but we know who does the real work 😂😂😂😂😂
Hi Heath, I see you finally stopped # numbering your videos (which was very smart) but what I was wondering is did you do the same thing on this video that you did on video #80 to speed up the ram?
Well my old Huskee 22ton was in need of a new engine after 20yrs the old B.Stratton 650 was falling apart.. upgrade to a Harbor Freight 212cc Predator engine and a 16gpm pump and 3/4 NPT fittings and we should be splitting alot faster once I get everything mounted in
Can you tell me what the thing is behind touching the tip of the saw blade after each time you make a cut? I have never seen this done before and i watch "a lot" of bucking billy ray, lol.
I have a firewood pro sizer. It is a small laser that attaches to the handle of the saw. I touch the tip of the saw to the log so the laser is at the same point every time. This helps me get perfectly uniform cuts. If you look closely you can see the green laser dot hit the log when I do this.
thanks for the video. i also like your idea with the laser. i normally use a measuring stick(takes time marking). are you using a gun mount laser? i tried amaOn for chainsaw lasers but to no avail
Lil off topic question if you don’t mind. Have you noticed a difference in rpm of all your splitters you have tested. Not splitting rpm just at operation rpm not splitting. And do you have idea how high the norm is?
I did put a tachometer on the Eastonmade 12-22 and on my buddies Wolfe Ridge Pro28C when we were comparing them and they were very close. However I don’t remember what rpm they were running at. I can check next time I run the 12-22.
@@hardworkingmanoutdoors cool thanks. My small 22 ton is not turned up very high. Makes me think it should be higher. But do I really need it to be lol.
Gear pumps like 1200 rpm, engines like 3600 rpm. The new splitters us double pumps with a crossover valve set at ?. The small pump can run for a short time at 4000 psi (would you believe it?) a GEAR PUMP with a directional valve and cylinder is a very efficient system. Often in the past a single gear pump was connected by V belt to a jack shaft with a 3;1 ratio. Oil does not like to move fast especially when cold. The new splitters have a double pump that is much smaller and can be rated at 4000 psi for a short time. However it still must slow down when the jaws close on the wood or hit a knot. My 30 year old splitter has a jack shaft and a 2 inch gear pump (probably of a Case Back Hoe) It also has a 5"x 36" CAT cylinder. i have re plumbed to add a filter get rid of the water pipe fittings. It has a Ford solid axle with 15 inch tires. It tows good, if you remember to extend the cylinder and put weight on the tongue. For 3 foot rounds I can put the tongue on the ground and roll the rounds into the jaws. I sit on a padded round and use my shoulders and knees for the work. I roll the rounds or put them in a double wheeled wheelbarrow downhill into the barn. As I split I have shelves on either side of the wedge so I can just throw the keepers into a loose pile in the corner. Right now the corner is 12x 20x 4 feet high. If I had a lot of money, I still would not have a tractor or side by side or pickup involved. I got a new Duromax with electric start and I really like it. At 88 I need my exercise but do not want to over tire myself. I was a Sales Engineer for Vickers and TRW ROSS. My territory was Rocky Mountains West, I travelled with my skis in winter in flyrod in summer. Its been a good life. Iguana Ps Get Smart, Get Trump
I really like it. It does have its drawbacks, needs to be charged, if you swap saws you either need more of them or re install, etc. but when it fits it’s a huge time and work saver.
This is Jon edwards. Not sure why it doesn’t show the right name. It’s the low pressure transfer pressure. I sent you an email about this the other week with pictures and a link to a flow diagram I have basically a county line 25-ton box store like you do. For me, I wanted a pressure gauge on my high pressure hose. My transfer pressure is rated for 400-900 psi. The pump setting is at 800 psi. I got a similar benefit just by changing the high pressure hose from 1/2” to 3/4” between the pump and the directional control valve. When you look at the flow chart, 1/2” is at the edge for being too small. It would be much better with at least a 5/8” hose. So there are several items that could contribute to this
Thanks Jon, not sure why the names on UA-cam have been showing weird lately. It’s amazing what correct hose size and proper adjustments can do to machine performance!
Here is a link to the video. It is called the firewood pro sizer. New Tool Helps Cutting Perfect Rounds for Splitter Wars! #108 ua-cam.com/video/jki5DdGceps/v-deo.html
The adjustment takes 2 minutes and costs nothing. With these machines we can get easily split 1/3rd of a cord in 10 minutes which we sell for $150. So in you example we could easily split an extra $75 worth of wood per session. I’d say it’s well worth making the adjustment.
Terve Suomesta, täällä on paljon kätevämpiä pilkekoneita kun teillä siellä Amerikassa.Ei täällä tarvitse käsin kannella pölkkyjä eikä valmiita pilkkeitä tarvitse käsin liikutella. Hihna kuljettaa pilkkeet auton lavalle.🌍🌎
Whiskey Tango Foxtrot why too many macho You Tubes cut without any PPE. If you're a vet you'll understand why we used Kevlar. JMNSHO Thimk how much an ER visit will take out.
Making a pressure adjustment on ANY hydraulic system without using pressure gauges and adhering to manufacturers recommended pressure ranges is foolhardy to say the least.
I guess it’s a good thing I talked to both Andrew from Eastonmade and Bobby from All Wood to learn how to do this. Chris from Wolf Ridge also reached out and said they are done the same way.
@@hardworkingmanoutdoors Heath, 1st check for belt slipping, next unnecessary safety junk, and look for Stupidity in the design, slack in the rack and pinion, as well as binding, Take Care 👍🏼🇺🇸
Good job on this video Heath. That adjustment is the unloading valve. Trying to run too much flow at high pressure kills the engine. Unloading that high volume gear set allows it to build pressure without stalling.
Wolfe Ridge machines have the adjustment in the same location as the EM, and they are fully tightened and then set 1.5 turns out CCW at my shop... Just so you Wolfe Ridge guys have a good base line. Just make sure not to set this adjustment too high as it can cause damage to the engine long term.
Thank you Chris, I was actually researching this more today and learned how the unloading valve works. Pretty neat. I plan on doing a follow up video and appreciate the information, I’ll pass it along. Also going to pin this comment so Wolfe Ridge owners can see it as I didn’t have a WR to show in the video.
Thanks for the explanation Chris, and thank Heath for putting this video together, you did a great job showing the comparison. I have a WR 35 SHO, with 7 hours, so I doubt it has slowed down much, but I’m definitely going to save this video for later down the road. Thank you and have a great weekend Around the Yard! - Brent
Thanks Brent. Yeah my guess is that after time maybe the spring gets a little weaker and needs to be adjusted but as Chris mentioned I’m sure most of the commercial companies set them correctly before shipping them out.
Good info! A lot of people don’t understand hydraulics and you made it simple
Thank you Darrin!
It's good to know, after 50 yrs, that some 2stage pumps are adjustable! The universe makes a lot more sense now!! Thanks!
Glad we could help, I have had quite a few people contact me saying this helped them a lot. Appreciate the feedback.
Months later, I'm looking at this again, and it's still pretty dang cool. I had a 2 stage long ago. It was so bad, I threw it away. Wish I'da known about this back then!@@hardworkingmanoutdoors
Omg!
I knew I had a problem, my 2nd stage was starting way to early, l had no idea it was adjustable was thinking that my pump was going bad.
I love your videos.
Thank you so much
Glad this video was helpful. I know when I found out about this and made the adjustment it was a big difference. Like a whole new machine.
Heath I have to give you and all these content creators props for doing videos to keep us entertained , theres no way I could do it this time of year. Big reason why not yesterday it got up to 115° and it's supposed to be even hotter today , think i'll fill my bathtub , add a fan and just soak all day😂
Thanks, I don’t like the heat at all but still try to get done what we can when we have time. The rain has been our biggest issue lately.
Great information and demo Heath and nice job on the camera work Rachel. Keep going with the fabulous content!!
Thanks Obie!
Thank you Obie! We try to keep it interesting, fun, and informative.
Hey Heath and Rachel , great video . Thanks for the info !!!!
Thank you Del!
Im here watching you from Australia, and then you pulled out an Australian chainsaw product! Hope it works like a dream, and your property is amazing. Beautiful countryside. Wood splitting can be mesmerising to watch for some reason.
Thank you, we also just add a Yakta lawn mower which is based out of Australia.
I am interested to know why he hits the end he has just cut with the tip of the chainsaw?..
@@agedflier9129 it is to index the firewood prob sizer a laser measuring device I use.
Nice, good info, Heath, thanks for sharing.
That Andrew is a good man.
You’re welcome and thanks for the feedback. I’d have to agree on Andrew as well.
Nice work Heath. My splitter has a two stage pumps also. I should check. That All Wood splitter is impressive.
Thank you, it seems most 2 stage pumps have the relief valve.
I’m sure glad to see you’re taking good care of our saw Heath❤
For sure Jeff! I really like this saw.
Thank you for the info H,W.M and you guys have a good day.Greetings from Canada
You’re welcome and thanks for the feedback Marcel. Have a great day.
Something new, I’m going to try to adjust my Iron and Oak the same way. I’ve had my machine 20 years without knowing how to adjust. This should really make a difference.
Hopefully, hopefully it helps speed it up a little, it’s definitely a setting that needs to be adjusted from time to time.
Great informative video. I have just purchased a used 12-22 as well and will be paying a closer attention this to see if I need to make an adjustment or not
You are going to love it. On other thing I had to adjust was the autocycle kick out pressure as that had loosened up over time as well. If it kicks back too easy it may need to be adjusted. This is pretty simple as well.
Thanks for sharing this information!! Stay Hydrated and Have a Safe Day
You’re welcome David thanks for checking it out and commenting.
Very useful information Heath. Thanks for sharing.👍
Thanks Jimbo and you’re welcome. Sounds like it has already helped a few people out.
nice saw I have the twin. 10mm 044 I got it late 80s early 90s I do have a ms400 both are great. I have had many people try to buy 044 when they see a one owner sweetheart only used to trim rose bushes at the local church! lol
Oh I bet. They are a sweet saw for sure! I am the second owner of this one I even got the original Stihl hat with it.
I just have a regular "Ma and Pa" Speeco splitter. My wife and I (if we're together) can split a full (3 stoves) cord in about 3-4 hours. Usually all gnarly Oak and Elm. LOL. Always knew the valves could be adjusted but never had it explained. I've got a hell of a lot of hours on it but it seems to "shift gears" appropriately. But still nice to know. The cycle rates on my kind of machine are painfully slow particularly after watching all of these challenge videos and seeing the "pricey" machines you all run. Its a lot more work and time with my machine but I'm getting older and only "process" wood for myself. I wear out so fast these days, I think I'm finally catching up to the speed of my machine.....meaning, I slowed down enough for us to work in simpatico together. LOL, Love the videos and the challenges particularly. It's great to see good 'ol family content of couples working together to accomplish a shared goal. Its so much better than the lives most of us lead.......going our separate ways to work each day to meet up at the end of the day, too tired, ornery, or busy to show each other appreciation. It's wonderful to see the two of you literally and figuratively working together and enjoying each other. Give Thanks, because (yes ya gotta work at it, but) it's a Gift. Thanks.
Thank you! We appreciate the feedback, and yes it is work but also such a blessing to be out there with the family. Sounds like your Speeco has served you well!
Good info. I didn't know about this. Happy splitting!!
Thanks Joey!
good video years ago my dad had me turn up the pressure on a industial tractor loader and hoses started blowing out so i had to turn it back down i think it only had single stage pump. just be careful turning up pressure. Rachel yous good in saw dust. take care, be safe and well.
Yeah, that could be dangerous for sure. This doesn’t change the pressure, just changes the pressure that it switches to stage 2. If you set it too high it will simply stall your motor in stage one before kicking to stage 2.
I kicked my axe into stage 2 this afternoon, hahaha. If I ever get a nice splitter like you have, I'll use this information wisely.
Kenny❤
The problem with stage two on the axe is that it doesn’t seem to run as long lol. My motor gets tired.
@@hardworkingmanoutdoors hahaha, yep.
Love ALL your videos !
Thank you Jerry!
Great information thanks keep up the good work.
Thank you Dan.
That's a tip that I have told lots of people to do when they are after faster cycle times.
Definitely Alan, I know a few have mentioned it on our channel but know a lot of people haven’t heard it yet so I figured it helped me out it may help out others. One thing I love about having a channel and this community. Always learning and willing to help.
Great video Heath! Good information to share.
Thanks Bobby! Still need to check out the wood wagon video. How’s it working so far?
@hardworkingmanoutdoors the wood wagon is working out great. It definitely allows me to be more productive with my time splitting. I did have an incident with it today. Next Sunday's video shows what happened.
This was new for me thanks a bunch
You’re welcome Tommy, thanks for the feedback and glad we could help.
Very informative!👍👍
Thanks Jeremiah.
Good info 👍🏻 Like that saw also 👍🏻
Thank you, I really like this saw so far too.
Excellent video!
Thank you.
Great video. If I only had a big commercial unit like the ones you have lol. Still very good info to know. Thanks heath 👍
Thanks Pete, I’m curious if the box store splitters have an adjustable 2 stage pump.
Yes they do have one. I just went through the process a couple weeks ago and can’t find the video I watched that explained the process.
There’s nothing wrong with all my pump is adjusted. But the hoses absolutely suck based off of size.
I bet a lot of box store splitters could use an adjustment for better performance!
@@hardworkingmanoutdoors
Probably need a better hose system that they do a pump adjustment.
I know on my splitter, I’ve benefited better from the hose. Now with the pressure gauge in it, I realize I do not have to adjust the pump. My transfer pressure is 800 psi in my deadhead pressure is 3600 psi.
Great channel xx
Thank you Stewart.
Nice video Heath. I’ve adjusted kick out pressures on my valves, but have never adjusted pressure on the pump. I’m going to check my Wolfe Ridge 28C to see if the pump is going into 2nd stage too soon. Great information!
Thanks Dick, let me know if you can adjust this on the Wolfe Ridge. I have to imagine you can but not positive.
You are sharing all my slippery secrets.
I enjoy learning about this stuff and sharing what helped me. Really like your videos when you explain hydraulics etc.
hi there good show , thats what makes mine so fast .it only has one stage , but not very strong . could up grade the pump but after 50 years i think i will be fine . john
Thanks John, the single stage pump’s definitely are fast but don’t have that second stage power for sure. Usually not needed but can come in handy. A giant engine and single stage would be the best of both worlds.
@@hardworkingmanoutdoors hi that's what we did on that big splitter big pump and 100Hp John Deere diesel engine , 6 inch bore cyd ,
Great video. They work good. That’s a great way to cut up a tree. 👍🏻
Thanks Noel.
Laser! Brilliant!
Thank you.
Man that All Wood has a killer Cycle Time. I need a faster Cycle Time.
Yes it does. That thing is a beast.
I liked how you used triangulation when cutting logs into 16" sections
That Pro Sizer works great for pretty precise cuts.
I'm probably one of few people that know about it.
As it was part of my hydraulics class in diesel tec school.
.
But otherwise yes, very good example of how to adjust it.
Thank you Bruce!
With the Allwood splitter it would be a good idea to make a steel cover over the ram so no firewood can get behind it on the return
That definitely wouldn’t be a bad idea.
@hardworkingmanoutdoors i had that happen to me with my 12 22 Easton Made the first week i owed it. There's not much space for a guard on it. The all wood looked like it had room for it
@@nelsonstree436 we’ve only ever had one flip behind it when someone else was running it but it definitely made me nervous.
Really helpful. Thanks for sharing. Now is there away to actually know if your getting the correct tonnage of pressure according to your cylinder size. Or what that sticker is actually advertising. That wood be a interesting video to watch.
Thank you, I am not sure about measuring the tonnage. I’d imagine you’d need some type of machine to actually measure the force. Other than that you could probably use match with the inline pressure gauge to calculate what it should be.
Going to try that on my power pack for the disc cleaner
I wonder if that has a 2 stage pump? I don’t know much about the disc cleaners.
@hardworkingmanoutdoors you may not know about disc cleaners but you helped me fix my problem.. the pressure changed some how.. I adjusted and it works better than new.. thanks
Awesome, glad we could help. That’s what it’s all about, helping each other out. We learn a lot through the channel and try to share what we can with others.
Shes a trooper no complaints.
Yes she is!
that's like us, I can grab 3/4 pound or 1/2 lb of ham, turkey, RB, every time. I bet your logs are 14". Kinda a dumb comment.. but. The tool that burns twice as fast, burns half as long! Taken from 'Blade Runner' 1982 film. That's cool, adjusting your equipment!
Thanks, they seem to need a slight adjustment every once in a while.
I'm confused about why you put the tip of the bar against the piece of the wood you had just cut before you cut the next piece?
I have a firewood prosizer on the saw. It is a laser measuring device. You have to address the log the same every time and see where the laser hits.
Oh ok... it's been a number if years since I've been in the woods! I didn't realize they have something like that! Thanks for the information!
Great Video bud!
GOD BLESS YOU!!
😊🙏🏻❤️🕊
that allwood looks to be a beast! do they make a vert. like the axis?
It is a beast. They do not make a vertical unit.
Man, that wood was a “Beech" to split 😂. I’ll be here all day…
Good tip though. I was going to say that you’ll have to change the channel to Harder Working Man now, but we know who does the real work 😂😂😂😂😂
Thanks Jason, we all know who the star of the show is lol.
@@hardworkingmanoutdoors we do! Classic move on the other video where you were chilling and having a drink. 🤣
Thanks, I thought it was a great way to get wood split lol.
Hi Heath, I see you finally stopped # numbering your videos (which was very smart) but what I was wondering is did you do the same thing on this video that you did on video #80 to speed up the ram?
Thanks Joe, no, in video 80 I replaced the hydraulic lines with larger sized lines and installed a new ram!
Hmmm, might try this on my box store splatter
Let me know if they have an adjustment available. I was hoping to check one to see.
Well my old Huskee 22ton was in need of a new engine after 20yrs the old B.Stratton 650 was falling apart.. upgrade to a Harbor Freight 212cc Predator engine and a 16gpm pump and 3/4 NPT fittings and we should be splitting alot faster once I get everything mounted in
I’ve heard a lot of positive feedback on the predator engines. I used to run a husky it was solid!
Can you tell me what the thing is behind touching the tip of the saw blade after each time you make a cut? I have never seen this done before and i watch "a lot" of bucking billy ray, lol.
I have a firewood pro sizer. It is a small laser that attaches to the handle of the saw. I touch the tip of the saw to the log so the laser is at the same point every time. This helps me get perfectly uniform cuts. If you look closely you can see the green laser dot hit the log when I do this.
@@hardworkingmanoutdoors
A+
That's extremely awesome !!
Never knew such a thing was out there !!
Can this be done on a box store splitter pump?
Yes it can, the setting screw looks a bit different though.
thanks for the video. i also like your idea with the laser. i normally use a measuring stick(takes time marking). are you using a gun mount laser? i tried amaOn for chainsaw lasers but to no avail
You’re welcome. The lazer is the Firewood Pro Sizer. They work great!
@@hardworkingmanoutdoors Thanks, i found the seller on etsy
Lil off topic question if you don’t mind. Have you noticed a difference in rpm of all your splitters you have tested. Not splitting rpm just at operation rpm not splitting. And do you have idea how high the norm is?
I did put a tachometer on the Eastonmade 12-22 and on my buddies Wolfe Ridge Pro28C when we were comparing them and they were very close. However I don’t remember what rpm they were running at. I can check next time I run the 12-22.
@@hardworkingmanoutdoors cool thanks. My small 22 ton is not turned up very high. Makes me think it should be higher. But do I really need it to be lol.
Gear pumps like 1200 rpm, engines like 3600 rpm. The new splitters us double pumps with a crossover valve set at ?. The small pump can run for a short time at 4000 psi (would you believe it?) a GEAR PUMP with a directional valve and cylinder is a very efficient system. Often in the past a single gear pump was connected by V belt to a jack shaft with a 3;1 ratio. Oil does not like to move fast especially when cold. The new splitters have a double pump that is much smaller and can be rated at 4000 psi for a short time. However it still must slow down when the jaws close on the wood or hit a knot.
My 30 year old splitter has a jack shaft and a 2 inch gear pump (probably of a Case Back Hoe) It also has a 5"x 36" CAT cylinder. i have re plumbed to add a filter get rid of the water pipe fittings. It has a Ford solid axle with 15 inch tires. It tows good, if you remember to extend the cylinder and put weight on the tongue. For 3 foot rounds I can put the tongue on the ground and roll the rounds into the jaws. I sit on a padded round and use my shoulders and knees for the work. I roll the rounds or put them in a double wheeled wheelbarrow downhill into the barn. As I split I have shelves on either side of the wedge so I can just throw the keepers into a loose pile in the corner. Right now the corner is 12x 20x 4 feet high.
If I had a lot of money, I still would not have a tractor or side by side or pickup involved. I got a new Duromax with electric start and I really like it. At 88 I need my exercise but do not want to over tire myself. I was a Sales Engineer for Vickers and TRW ROSS. My territory was Rocky Mountains West, I travelled with my skis in winter in flyrod in summer. Its been a good life.
Iguana Ps Get Smart, Get Trump
I’m impressed with all you’ve got going on. I’d love a new Duramax.
How do you like that pro sizer
I really like it. It does have its drawbacks, needs to be charged, if you swap saws you either need more of them or re install, etc. but when it fits it’s a huge time and work saver.
I like uniform wood too , when I put up a stack , "it looks good" and stays up .
Definitely Michael, have a great day!
This is Jon edwards. Not sure why it doesn’t show the right name.
It’s the low pressure transfer pressure. I sent you an email about this the other week with pictures and a link to a flow diagram
I have basically a county line 25-ton box store like you do.
For me, I wanted a pressure gauge on my high pressure hose. My transfer pressure is rated for 400-900 psi. The pump setting is at 800 psi.
I got a similar benefit just by changing the high pressure hose from 1/2” to 3/4” between the pump and the directional control valve. When you look at the flow chart, 1/2” is at the edge for being too small. It would be much better with at least a 5/8” hose.
So there are several items that could contribute to this
Thanks Jon, not sure why the names on UA-cam have been showing weird lately. It’s amazing what correct hose size and proper adjustments can do to machine performance!
@@hardworkingmanoutdoors
Found the link on how to adjust the pump transfer pressure on a box store splitter.
ua-cam.com/video/tx2DDslCgAM/v-deo.html
How much times does it really save, 2 seconds per cycle? 30 cycles would be only 1 min.
Seconds add up to minutes, minutes to hours, hours to days. It is a simple adjustment that takes 2 minutes and costs nothing. I’d say it’s worth it.
🎧🤪🎙️🫶 Thank you so much for sharing 🙏 I wishing you a beautiful day to you and all your viewers. Much Love Thierry ❤️˘◡˘❤️
You’re welcome and thank you.
Did you make any video about the laser you have on your chainsaw? Any link also where I can buy one laser? Thank you so much in advance ❤️˘◡˘❤️
Here is a link to the video. It is called the firewood pro sizer.
New Tool Helps Cutting Perfect Rounds for Splitter Wars! #108
ua-cam.com/video/jki5DdGceps/v-deo.html
@@hardworkingmanoutdoors Thank you so much I appreciate your time gonna watch now 😜
What happen if i turn to much i think my log splitter need adjustment but im afraid turn the thing lol
If you turn it too much the engine will sputter and stall while splitting a really tough round.
You really need to get some PPE and learn how to run a saw properly. Nice kit though 👍
Thanks.
Standing under the hydraulics?? Scary 😮
It’s a no, no but I tried to stay out from mostly.
Can u not judging the length of your nxt cut without holding your bar at the end of the log.
I’m using the firewood pro sizer I like all of my wood very close in length. Thanks for watching.
It's a jam nut
Thanks.
😂@@hardworkingmanoutdoors
Camera woman make him sleep on the couch and he will call both the same and remain consistent.😅
I got rid of my couches so that’s never an issue 😂
ok so your saving 3 or 4 sec per round if you split 100 rounds in a session, you saved 400 sec 6 1/2 min no big deal
The adjustment takes 2 minutes and costs nothing. With these machines we can get easily split 1/3rd of a cord in 10 minutes which we sell for $150. So in you example we could easily split an extra $75 worth of wood per session. I’d say it’s well worth making the adjustment.
Terve Suomesta, täällä on paljon kätevämpiä pilkekoneita kun teillä siellä Amerikassa.Ei täällä tarvitse käsin kannella pölkkyjä eikä valmiita pilkkeitä tarvitse käsin liikutella. Hihna kuljettaa pilkkeet auton lavalle.🌍🌎
Thank you for watching. We have similar machines here, I just do not have one yet but would like to one day.
Suggestion:
More Rachel
Less you
Better fir your numbers
JB I’m starting to think you only watch the channel for Rachel lol. I have to do a few solo videos to keep the name HWM legit.
Whiskey Tango Foxtrot why too many macho You Tubes cut without any PPE. If you're a vet you'll understand why we used Kevlar. JMNSHO
Thimk how much an ER visit will take out.
I normally wear my ppe but not 100% of the time.
Making a pressure adjustment on ANY hydraulic system without using pressure gauges and adhering to manufacturers recommended pressure ranges is foolhardy to say the least.
I guess it’s a good thing I talked to both Andrew from Eastonmade and Bobby from All Wood to learn how to do this. Chris from Wolf Ridge also reached out and said they are done the same way.
Great day! It took you over 9 minutes to get the point of your title. SMH.
Thanks for watching.
Nice top rachel and and you 2 have nice day❤❤❤❤🙂🙂🙂🙂
Thanks Richard, I love that dress. Have a great day.
Hello Heath, Good explanation, Common issue with 2 stage pumps, definitely have yours adjusted correctly 👏🪵👍🏼🇺🇸
Thanks Larry, it makes a huge difference for sure. Now I need to figure out why my Kinetic splitter lacks so much power.
@@hardworkingmanoutdoors Heath, 1st check for belt slipping, next unnecessary safety junk, and look for Stupidity in the design, slack in the rack and pinion, as well as binding, Take Care 👍🏼🇺🇸
Thanks, we took it apart and it seemed right etc. it will be shown in an upcoming video.
Excellent advice and video Heath ❤🪵👍😮
Thanks Todd!
Thanks for the good info Heath. I'll have to adjust mine and see what it does. 🔥🪵🇺🇸
Thanks Mike, let me know if it helps.