Це відео не доступне.
Перепрошуємо.
How to connect any 3s LiPo battery on DJI Osmo / battery extension
Вставка
- Опубліковано 12 кві 2017
- Hy there,
Lot of people tell me in the comment, that i must start to recording my voice to, not according to my poor knowledge of english.
So here is my first video with audio comment.
This clip is become a bit too long for that small amount of information, but next time i'll prepare myself a bit better so i promise better result.
In this video i'll show you how easy is to convert the osmo battery extender to connect on it any 3s lipo battery, dc adapter, car battery or any other 12V source.
Thanks for watching and see you next time
Music:
Sunday, Otis McDonald
Your English is VERY good. I have no problem understanding you. I like your style of presentation. I look forward to more of your videos. Good job. Thank you !!!
Ted Swimerr thanks a lot, i got many ideas for videos but it depend on my free time. heave a nice day man.
Hi there. I was looking for an alternative to using the Phantom battery and your video was perfect. Now I know I can use a LiPO battery and I bought all the stuff. The battery saved me a fair amount of money as its a lot cheaper than the phantom battery. I could understand you just fine. Keep up the good work and hope to see more hacks to save money with alternatives.
Walter Wu thanks man, and welcome to watch my latest video, i think my speaking is better now.
tintek33 I made 2. One with a phantom battery direct to extender and used cat 6E cables and to the phantom battery. And another to an RC battery. Both work fine. Keep on making more DIY videos.
you may just be my new fave youtuber
Great thanks for the video now I can use LiPo drill batteries for the long records
Yes until they are 12V or use dc dc regulator to lower down the voltage to 12V
nice stuff
Thank you for a great vdo. Now I need to find the bits & large battery 🙏❤️🌹
Hi, thank you for the very intuitive video! May you advise how long does the lipo (mah) last with this setup?
i'm looking for this right now! Thank you very much!
bu Man No problem, thanks for watching.
I need this battery bro
vorrei sapere per alimentare OSMO con batterie normali di videocamere tipo 7,6V 4500mAh 6000mAh possono andare bene?
I finally made mine. And I'm thinking. It should be possible to not have the additional cable to the dji battery. I can just cut the cable from the extender and add a copper pair wire to the battery. Right?
Endra Media of course, but i don't want to cut new extender.
excelent video!! can this be done but with a simple cellphone powerbank?
Ricardo Rodriguez thanks, and NO you can't use power bank, it has 5v on usb output for power the osmo you need 12v so you can use 3s lipo, 3s liion, 10 cell nimh/cd, car battery, power supply, solar panel.... Whatever it just must be 12V about 1,5-2A current.
the question is. does it make sense to buy 3 18650 batteries and connect to DJI. Will work?
Sure it will work you can also make 3s2p pack out of 6 cells to get bigger capacity, but i advice to use original dji adapter
You are more than best right now, thank you!
Serkan Uysal thanks
After I watch your video I bought these items on amazon
www.amazon.com/gp/product/B01EL8TO6C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
www.amazon.com/gp/product/B00935L44E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
it has 12v output, I am kind of sure they will work but can you please take a look if this battery pack would work.
tintek33 i have a small problem my dji osmo works only a minute, then it shuts off I am using 12v battery pack As I send the link up there, what do you think it is problem... :(
Serkan Uysal hm, strange... You must know that 10000mah on that battery mean 10000mah on 3,7v if you stepup to 12v you got aome looses here so on 12v you got about 3000-4000mah, still must be enough to power osmo for about 30 mins...
There can be some overheating or overcurrent protection, did you check the max current of power bank can give you on 12v port?
I make a measurment and osmo can consume about 1-2A of current, that can be more than 5a from the 3,7V battery in the power bank.
I use 3s (about 12v) basic lipo battery without problem.
tintek33 hi, please forget about what I said, I found the problem, so there was a bad/ cheap male adapter connections, so i put some aluminum foil inside male connecter the connected into battery pack then it worked well, male adapter was cheap probably... thank you for your comment anyway and your help...
Suas dicas me ajudaram muito, valeu!
HI I WOULD LIKE to KNOW the NORMAL BATTERIES 6V 4500mAh 6000mAh 7 NIGHT V,
go well?
very good work! this is by far the best osmo modsing video i have seen!
Bodiii thanks, yes works great, but the video is not so good, one of first shoot with osmo and first speak, i think i am much better now.
tintek33 but i really think you don’t have to be sorry about anything. you can be proud, because you managed to do all important elements right. right angle, good editting, perfect use of music and a really great explanation of what you do and why. my colleague said the same. i will check out your other videos later! have a nice time!
Bodiii Thanks.
thank you!! I've just ordered all ill need to use my magic pro batteries
great, just be carefule with polarities
Why didn't you put the LiPo bullet connectors on the end you cut off - opposite the barrel connector? It would have saved you making the small adapter?
sory for late replay, i do that because i got meny types of battery, but most of time i use power supply to record inside of my workshop.
I WATCH THIS VIDEO FOR INSPIRATION, FEW TIMES A WEEK. HOW CAN I CONNECT TO A POWER BANK?
I'VE PURCHASED A USB 5V TO 12V SET UP CABLE BUT STILL NO LUCK. ANY SUGGESTIONS.
THE CABLE DOES WORKS, ONLY IF I USE A POWER BANK WITH A 3 PRONG OUTLET ON IT .
Sure powerbank can't give enough current on output, if osmo use 1A on 12v you need about 3A on 5v...
1A*12V=12W and 3A*5V=15W
PERFECT!!
can you please show us the detail of which cable is the + and - and is it possible to change the socket head into usb type so we can plug into a power bank? considering everyone should have one nowaday? nive vid btw! cheers
j nuts hy, i think i explain in the vid wich cable is positive and negative.
You can't use power bank because it's 5v power source. If you use step up circuit it will drain power bank with about 5-6A (this mean more than 10A out of battery in power bank) i think there is not many power bank that can hold that power
A powerbank is only 5 volts
Hi, I made the connection to the external batterry pack, but cut the cable from the battery to the female connector, so far so good, but just like in your video, my voltage is 11.10 V apparently the osmo does not recognize that voltage less than 12V, since some things are activated in the osmo, but does not turn on the green light and the stabilizer does not react, I hear sounds from inside the osmo in apparent activity.
also try to connect it to DC and it is the same voltage (my external battery is 12V 6800MH)
Watch for your comments.
Greetings thank you.
Claudio Alfaro H. I don't remember how much voltage osmo need to work, but last weekend i work with 3s lipo all day and work with no problem, you can try to charge your lipo and you must got more than 12v out of your fully charged 3s lipo.
it worked! my problem was the firmware, now it's ok
Claudio Alfaro H. Does it mean that if you upgrade the firmware you can use a simple 11.1v?
Claudio Alfaro H. Does it mean that if you upgrade the firmware you can use a simple 11.1v?
the sole is made with a 3d printer? is there a graphic pattern on it?
Yes it's 3d printed, files can be find on thingiverse
wow... good idea. thanks
CIAO VORREI SAPERE BATTERIE DI NORMALI VIDEOCAME 7,6V 4500mAh 6000mAh
vanno bene?
Fabio Fermi i don't understand but you need 12v dc power source.
Nice bro, can work with 3.7v single 18650 battery?
No 3cell only but will work with 18650 3s also
Thanks you for your reply
I need this setup... how much bro?
Buy original dji battery adapter and cable and plug any 12v batter on it.
Thanks you!! You are great!
Thanks, no problem
@@TinC33 Sorry but could I use this ?
12V Buck Boost, DROK DC 12V 24V to DC 12V 3A Automatic Step Up Down Voltage Regulator Power Supply Module 5V~32V 36W Waterproof DC-DC Auto Buck Boost Converter Volt Stabilizer
@@lone_wolf3552 I think yes all you need is 12v about 1A-1,5A if i remember but if you mean to plug power bunk on that i doubt it will work, because powerbang can't give that much current out (maybe some better bank) because you need about 3-4A 5v power source, if you want to step up to 12V 1,5A
@@TinC33 got it!!
It worked!!! thank you
ty im off to do this NOW ill come back to let you know
worked good ty
Crappie Fishing with nottheexpert88 thank you for report, just bee careful with too high voltage
Ya man all is well thanks buddy
Does any know whats the size of the barrel connector so i could just buy the connector and do a bit of soldering :)
+Jan Andersson outer diameter is about 7,5mm and 12mm leinght, positive is just tiny pin in the center.
hmm so its not the standard 5,5mm barrel but a bigger 7,4mm usually found on laptop psu's..but thanks for measuring and seems i need to do some hunting to find a connector. just buying the dji cable is a waste
yes it's some strange dimension, maybe from laptop yes, i didn't think twice and buy original conector for $5, cut it off and solder my type of connector on it.
i use power supply most of time, power consumption is about 1A while working or standby but on start up it can go to 2A
yeah cheapest i can find the original 2 pin cable is about 15 euros..but still thats not too bad if i cant get the connector anywhere ill just get that
just ended up ordering it anyway..its way easier that way
hi men, you can also put 4s battery???? thanks for sharing
No no no, you can demage the osmo if you plug 4s.
3s only. Or 4s with dcdc convertwr to 11-12V.
@@TinC33 the DJI connect 4s phantom 4 battery 15.6 volt why???
@@papasvaggelis hmm, i don't know because i don't got phantom battery, but you make me start thinking now, maybe there are some dcdc converter inside, or osmo can work with 4s also i don't know, but this original cable is for phantom battery so you can use it.
@@TinC33 and the chargers of phantom 3--4 is a 15.5 volt and working with osmo dammy battery!!!!!!!!!!!
Is it safety and not make my osmo burn
Do you offer these for sale?
Sorry no, but it's so easy to make, if you got some friend with soldering iron...
Good, how long does this battery last on Osmo ?
Depnd on battery cappacity
@@TinC33 this battery 5000 mha
@@JRDroneImagensAereas original is about 1200mah, so that 5000mAh least about 5times more than original one.
I tried this with a dpi Ronnie m battery but it never worked . can't under stand why
John Chapman is this a 3 cell (11,1v) battery?
Where did you bought that fake battery part? I can't find it anywhere... :(
Battery is from hobbyking, lipo battery for radio controll use it's 3s (12v) but you can use any 12v battery...
@@TinC33 Ye. But I cand find the adapter that goes into Osmo. Where to buy it today?
@@vedranart ah that adapter, it's genuine dji product, but i don't know if they still sell them, it's called dji osmo extend battery
Is it problem to take 25c battery 5000mah
saleh al-saleh bigger capacity = more working Time, consumption IS about 1-1,5a so 1c IS enough...
tintek33 because i didnot find same your battery in my country i buy 25c I hope it work good if you see what's your opinion my friend i return the battery or is it good
Thanks my friend
saleh al-saleh C IS how much current lipo give if you had 5000mAh battery 25C= max current 5x25 so max 125amp. you need 1A, so 25c IS fine But also Can buy 10c or 15c it Will be lighter and smaller....
tintek33 thank you my friend for your time to answer me i will start to do tomorrow 🤚
Can you Please make me one.. i would be happy to pay
Nathan Haynes buy cable and give it to some electronic guy, everyone will solder that for you even some studdent. I come from slovenia so shipping will be problem.
Is it safety and not make my osmo burn
saleh al-saleh it IS tottaly safe if you know what you'r doing, I almost don't Use osmo battery anymore... Just be carefull with polarity.