DuroMax 18HP Engine Electric Start

[@brokentoolgarage]

Great job! My dad got one of those for a replacement motor and the wiring directions are less than stellar.

[@agkracing140]

Thanks so much for posting this! I have the same engine with the same wires and the diagram in the manual did not match at all. Your video was a really big help so thanks again!!

[@johnmattinson3513]

Thank you for making this!

[@sandraworkman2946]

great video very helpful How many charge coils does the engine come with if only one can I add another thank s for this video .

[@rbodell]

The manual drove me nuts till I looked at the engine. If you have all the wires connected it's pretty hard to get it wrong.

[@johnq7163]

Great video! I just got this motor for my gokart

[@whyyoumad67]

Thanks it was really Helpful

[@MichaelFarmer-r6n]

To charge the battery is brown wire ; but do you splice into it and run it to hot side of battery

[@Friedrich-Wilhelm-1980]

john plz let us see it run im trying to see how that engine handles that big of a cart

[@tylersenecal1807]

i have a manco duece with the same engine and i can do around 40

[@12ar34sw]

Thank you. I am grateful.

[@raydetermann9749]

What is your setup for the throttle cable to engine

[@jessemeanlt1]

I got rid of the low oil sensor, do know if the black wire that goes to the yellow wires needs to be grounded? Great video.

[@scorpioslab]

I have an extra black wire with a white stripe coming from the magneto do you have any idea what it is

[@gscott5269]

I recently bought one of these engines, how is yours holding up over time?

[@flexapex9801]

Can you use any lawnmower battery?

[@olscoole]

What size battery to use

[@jamesmartin7722]

Sorry for 3 post... Need help getting it to idle lower or stiffen clutch...thanks

[@habibhasnol]

Thank you 😘😘😘

[@Cmm4626]

Hey anyone know where I can get the stock rod bearings for the Duromax 440cc 18HP? Any help is greatly appreciated.

[@genebeard6704]

NEED A WIRELESS REMOTE FOR A DURAMAX 18 HP. CAN YOU HELP? THANKS! GENE

[@jeffnations6649]

Is the engine any good?

[@bradyoakland9287]

Can it run headlight lights on a go kart with out draining a battery. Thanks

[@bradyoakland9287]

John Cox thanks man

[@jamesmartin7722]

I have 18up Duromax. And cannot get it to idle low enough to prevent clutch from engaging. ... Have put heavier spring n clutch but still no success

[@johnofalltrades9581]

James are you using a clutch or a torque converter? This size engine should be using a torque converter.

[@jamesmartin7722]

i am using a torque converter... it is the original that came on the Kawasaki club car....
.i eventually solve some of this problem but am far from happy...
i did buy a different carb that gave me some more down side adjustment... and it will idle now but...just barley....
i doubled up on the springs and and this also helped ...
i need to find a longer belt due to the starter setting on the side of the motor and making the drive and driven a little farther apart than the original...
if i can do this it may provide just enough slop that everything will work... it not pretty but its close now,,
there is just not enough room to do anything else and didn't think finding a longer belt would be an issue ... but have not... any ideas???
Also, as i said not real happy but the next thing would be so just remount the starter to up on top and slide the engine back... really don t want to do this... lot of work... sorry for the delay in getting back but had surgery and am just now getting back in the shop ...slowly.... any advise as to belt would be appreciated

[@jamesmartin7722]

... Have put heavier spring n clutch but still no success, mine is also good cart rebuild

[@hamzaazzab267]

James Martin what kinda clutch did you use on this motor?

[@minasan7261]

Sir where we can ordering this engine

[@sewkingwet]

I got mine from HomeDepot for $387

[@johnofalltrades9581]

Amazon

[@timoncolhen3248]

You sound like Johnny Knoxville lol

[@azlongtales]

We have this motor on a boat check us out please 🙏