Aprilia Shiver 750 Factory APRC 🏍 with Akrapovič Exhaust, Decat, CF - Close-up, Startup & Revs! ★★★★

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • #ApriliaShiver #Akrapovic #UrbanRider
    Aprilia Shiver 750 Factory APRC edition with Akrapovič titanium exhaust and Leo Vince decat link pipe. Lots of carbon fibre parts, Matris suspension, forged rear wheel from RSV4F, Pirelli Rosso Corsa, Braking Wave® rotors, dry-looking clutch, DNA air filter, LED bulbs, voltage indicator, Shorai lithium etc.
    This is not a super fast or super high powered bike compared to its peers but it always puts a smile on my face when I ride it!
    Note: APRC referred here means Aprilia Riders Club Malaysia. APRC logos were shown on the front fender and rear hugger.
    Joy ride • Morning Joy Ride to Ta...
    Ride from KL • Riding home from CSSG ...
    Shorai lithium installation • Changing Battery ⚡ on ...
    Please subscribe to my channel for future updates and hit the notification bell (🛎). © DesertGoon
    Also to click 👍🏻😎

КОМЕНТАРІ • 149

  • @CloudoIX
    @CloudoIX 9 років тому +12

    ..pure awesomeness man!! I own a shiver and I have that smile like..always. My dream is to convert my bike to a factory one as well since Aprilia doesnt make for our model! That means a lot of cash here in Greece.. I have acrapo so far :D and some rizoma handle-parts!
    Cheers bro

  • @casio007
    @casio007 8 років тому +2

    Reaaaally nice work, man!

    • @DesertGoon
      @DesertGoon  8 років тому

      Thanks Radek. It's my work horse. 😊

  • @GarryThomassaltyreefers
    @GarryThomassaltyreefers 7 років тому +1

    Thats nice workmanship on your Aprilia.

    • @DesertGoon
      @DesertGoon  7 років тому

      Thanks Garry. It's my daily ride... to work. ☺

  • @stratozero1
    @stratozero1 8 років тому

    Probably the best motorcycle two cylinder on the market.
    There isn't a factory or aprc verion of the shiver but it look very good.
    Very impressive.

    • @DesertGoon
      @DesertGoon  8 років тому +1

      You're absolutely correct. ☺

    • @stratozero1
      @stratozero1 8 років тому

      Thanks , stay focused on the aprilia official site.
      In june you will see me and my shiver Hannlee on wide magazine , On the road section !

  • @Wild-Wood
    @Wild-Wood 3 роки тому

    Dang man nice upgrades

    • @DesertGoon
      @DesertGoon  3 роки тому +1

      🤭 Many thanks mate. 🤪

  • @Greek_MotoDivision
    @Greek_MotoDivision Рік тому

    beautiful!! Plz tell me how you fixed the license plate? can you show me behind?

  • @MrHutchie87
    @MrHutchie87 8 років тому

    Take the baffles out man!

    • @DesertGoon
      @DesertGoon  8 років тому

      Yeah I did that when I 1st fitted the cans. They sounded awesome but I was afraid the loudness may affect my hearing in the long run. 😂 I cut the baffles into half and put them in... so that's the compromise. Medium volume... 😃

    • @MrHutchie87
      @MrHutchie87 8 років тому

      Haha awesome! Removing the baffles was pretty much the first thing I did too. I always wear earplugs on longer trips anyway so hopefully I don't end up deaf. I sold the Shiver last year and now have a Tuono which is even louder so earplugs are a necessity but damn it sounds so good!

    • @DesertGoon
      @DesertGoon  8 років тому

      Tuono is an awesome bike and certainly a nice choice. I like it but I just don't want to let go my Shiver in order to get a Tuono V4. The Shiver is for me to keep...!

    • @DesertGoon
      @DesertGoon  6 років тому

      Michael Hutcheon I took the baffles out over a year ago and never turned back. Just love the noise...! 🔥😃

  • @hansmunster5871
    @hansmunster5871 8 років тому +1

    I can recommend an ECU update! I've done it and do not recognize back the shiver !!!!
    My ECU was not reflashen so that a new programmer bar geheigen ram had to be put into it .
    For: Road Italy - LV Deact - DNA filter 80.3 72.7 NM - BHP at the rear .
    After ECU flash : 90.0 BHP - 80.7 NM on the rear !!! : D

    • @ioannispolatkeisoglou7451
      @ioannispolatkeisoglou7451 8 років тому

      More info pls!!

    • @hansmunster5871
      @hansmunster5871 8 років тому +2

      Go to some one thats doing "rexxer tuning". Some ECU you can reflash, but mine not. The put a new RAM in thats was programmable. After that the make a file in the ECU thats fit on my bike whit the specifications. Then 7 runs on the dyno to get it like now..!!!!

    • @ioannispolatkeisoglou7451
      @ioannispolatkeisoglou7451 8 років тому

      +Hans Munster great thanks for the info!

  • @oso1165
    @oso1165 7 років тому +3

    how long have you had this bike and how do you like it. im on a 599 hornet right now and am considering upgrading to this
    how does the v twin motor feel vs an inline 4? thats what im most worried about

    • @DesertGoon
      @DesertGoon  7 років тому +2

      Oso 11 I ride it daily to office and it's awesome. Shiver doesn't have as much horsepower as the Japenese 4-inline but its torque is high and usable. 👍🏻 By the way I've had my bike since 2009. 😁

    • @TheBalija1
      @TheBalija1 5 років тому

      @@DesertGoon did you have any reliability isuses in those 10 years of owning the bike?

    • @DesertGoon
      @DesertGoon  5 років тому

      @AlK Vlogs The maintenance cost is for 4 bottles of oil (Shiver uses about 3.2 litres) and an oil filter. I DIY the periodic service so I save on labour charges. 🔧😁

    • @DesertGoon
      @DesertGoon  5 років тому

      @@TheBalija1 I didn't have any major issue in my Shiver ownership except once the air intake sensor (MAP) went kaput so it had to be replaced. 🤦‍♂️ I just searched and bought the part from eBay. 😄

  • @Herzankerkreuz67
    @Herzankerkreuz67 7 років тому +2

    Nice bike man !👍
    Question, hope you don't laugh about my ignorance......
    What is that break lever protector called ? And why isn't there one mounted on the clutch side as well ?

    • @DesertGoon
      @DesertGoon  7 років тому +1

      Thanks Andree. It's called brake lever guard and is used and also mandated in MotoGP. However it's not compulsory for the clutch side. You can view this video to understand the reason for installing a brake lever guard. Ride safe...!
      ua-cam.com/video/CM4-cB_0Y_Q/v-deo.html

    • @Herzankerkreuz67
      @Herzankerkreuz67 7 років тому

      DesertGoon
      Thanks for the reply and the link 👍

  • @1anre
    @1anre 6 років тому

    Glad to know it puts a smile on your face when you ride it. Do you think it’s nimble and fun enough to ride to/from work daily?

    • @DesertGoon
      @DesertGoon  6 років тому

      Aprilia Shiver is definitely a fun bike. You can feel the torque in stop-go ride especially in urban area. 👍🏻 Change the stock battery to a lithium battery and it makes the bike lighter and more nimble. ✌🏻🏍

  • @ryanyoung7433
    @ryanyoung7433 8 років тому +1

    WOW COOL VOLT GAUGE OHMERGAWD SO COOL!!!!!!!!!!!!!!!!!!!!!

    • @DesertGoon
      @DesertGoon  8 років тому

      It helps to monitor my battery and charging condition. At least I know if the battery needs recharge when the bike is not used for quite some time.

  • @sisano_2162
    @sisano_2162 3 роки тому

    You had an Aprilia shiver 750 I just got one 2009 Aprilia shiver 750 don't know how or if you can lower take off speed I put 1st gear let off clutch slowly and bike just takes off to fast without giving any throttle at all is yours like this How could I fix this?

  • @Wild-Wood
    @Wild-Wood 3 роки тому

    Where did you buy all of your upgrades from and do you still own the bike if you do have you had any troubles with it in the time you owned it thanks for this great detailed video!

    • @DesertGoon
      @DesertGoon  3 роки тому +1

      Hi WW. 🙋🏻‍♂️ Thanks for the compliment mate. ✌🏻 Yes I still have it and am keeping the bike in my garage... although it's not ridden much these days. The bike is already over ten years old (2009 model) and has accumulated about 84k KMs. My upgrades were mostly for cosmetic only like carbon parts except for the exhaust which was for louder sound 💥 (road safety reason ⚠️). FYI, I bought the parts from various online sellers like eBay, AF1, European sources etc. My only major problem encountered was a faulty MAP sensor which caused the bike to get stranded at a roadside once. After it was replaced, they bike ran fine until today. 🏍️💨 Cheers. 😎

    • @Wild-Wood
      @Wild-Wood 3 роки тому

      @@DesertGoon Didn't know about the reliability on aprilia's but that's sounds great! Thanks for the info man love the bike I might get one myself. Cheers! And ride safe

  • @Gu4rDi4N20vT
    @Gu4rDi4N20vT 4 роки тому

    Amazing :D It doesn't sound over the top, with DBKillers and DeCat :) I have Roadsitalia and thought about DeCat Arrow, but I was scared too much sound.

    • @DesertGoon
      @DesertGoon  4 роки тому +1

      Hi Victor. In reality Akrapovic exhaust does sound nice and is not obnoxious to the listener. 👂🏻 I have removed the DB killer for a louder volume 🔥 so that drivers are aware of my presence near them (esp. at blind spots 👀). ✌🏻😎 #RoadSafety

    • @Gu4rDi4N20vT
      @Gu4rDi4N20vT 4 роки тому

      @@DesertGoon Hahaha Thanks! I think is enoguh with my Roads with DBKiller,and DeCat Arrow. I thinking seriously in buy DeCat. #RoadSafety :)

  • @Camioup
    @Camioup 6 років тому

    Really nice bike, congrats mate ! Where did you buy the Italian flag sticker on the seat cover ? Thx

    • @DesertGoon
      @DesertGoon  6 років тому

      Camille Joly Thanks mate. I bought it online from eBay. ✌🏻 You can search for Italian or Aprilia stickers there and pick one which you like. 😁

  • @fenrirOZ
    @fenrirOZ 9 років тому

    Wow nice parts all. Really nice. Any thoughts of this bike so far?

    • @DesertGoon
      @DesertGoon  9 років тому +2

      +Evan Ong The bike is quite an all rounder. It suits many purposes, as a daily commuter, a weekend fun bike etc. Fairly nimble in handling. I've had it for about 6 years and generally it's trouble free.

  • @hoopersmith
    @hoopersmith 7 років тому

    Shiver looks great. What rear fender is that? How did it mount? I want one but don't want to do any cutting or drilling. I have a grill guard to install on mine came out of England. I also like your lower belly fairing. I have seen them on ebay but the years stop at 2012 and mine is a 2013, any idea if they work? How was the install?

    • @DesertGoon
      @DesertGoon  7 років тому +1

      It's a Skidmarx rear fender and came the fitting kit (no need to do any modification). The belly pan is ABS-model design and I used an Aprilia ABS mounting bracket which I bought from AF1. It should fit a Shiver of any year model. ✌

    • @hoopersmith
      @hoopersmith 7 років тому

      So you need an extra bracket for that belly pan to mount? How is the install? I want one but not sure of the install process and don't want to drill or have to make things fit right. I have a 2013 non abs Shiver.

    • @DesertGoon
      @DesertGoon  7 років тому

      The bracket is plug and play and should fit your bike. It's quite easy to install the whole thing. scontent-kul1-1.xx.fbcdn.net/v/t1.0-9/73932_1711520349357_5434035_n.jpg?oh=efba55fd96153f2660d191d6f9c3a91f&oe=58EF4198

  • @LITTLEbigRiders
    @LITTLEbigRiders 8 років тому

    Sweeeet, i have a shiver my own, what is that thing in the middle of your handle bars ? Is that for your phone, I am looking for a phone holder that is low profile ;) Ride safe but hard! - Little

    • @DesertGoon
      @DesertGoon  8 років тому

      +LittleBIG Riders Yes you're are absolutely right, it's a waterproof phone holder called Tigra Sport BikeConsole mount. :)
      scontent-kul1-1.xx.fbcdn.net/hphotos-ash2/v/t1.0-9/1150263_10202799207122774_1592671358_n.jpg?oh=b70674bdd4bbd0cbfc9f60c41f903cb8&oe=56DFD763
      fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/1528681_10202725769046868_944326619_n.jpg?oh=c0a0e3eed8c769a40bef819a123dfc12&oe=5713213D&__gda__=1460880870_1e65e54e8a7da5b0a112d3dd8479a1eb

  • @armsrulz
    @armsrulz 6 років тому

    Sir, when can I get those antitheft screw/bolt for the calipers? And how much it will cost? KL/SEL region. Thanks

  • @bananamacaca
    @bananamacaca 8 років тому

    Cool! I'm very interesting in the Martris rear shock, how is damping setting? does it feel unconformable?

    • @DesertGoon
      @DesertGoon  8 років тому

      +bananamacaca It has compression and rebound settings. My setting is a little bit on the stiff side (but still comfortable for me) for better stability at undulating corners but it's just my preference. Anyone can set it to his liking (whichever he wishes).

  • @accallonau2268
    @accallonau2268 3 роки тому

    where did you get the carbon parts?

  • @daviddavilamartel
    @daviddavilamartel 6 років тому +1

    Good friend. Excellent video!
    Could you tell me that the dome model has been installed? @DesertGoon

    • @mohamadlokmandaimon3582
      @mohamadlokmandaimon3582 4 роки тому

      Hi David. Your question wasn't clear... what did you mean by dome model? 🤔

  • @zulheikalmdzain5174
    @zulheikalmdzain5174 7 років тому

    bro...i noticed u installed the dna filter?..any changes in term of performance or feeling?. your comment much more appreciated. thanks

    • @DesertGoon
      @DesertGoon  7 років тому

      Yup DNA air filter. It gives a slight better performance in combination of a decat link pipe and Akra mufflers. Better intake and outlet...

    • @zulheikalmdzain5174
      @zulheikalmdzain5174 7 років тому

      If just a combination between akra and dna filter, do you think its worth it?

    • @DesertGoon
      @DesertGoon  7 років тому

      Yes still better than stock. 👍😃

    • @zulheikalmdzain5174
      @zulheikalmdzain5174 7 років тому

      Thank you bro

  • @dassengineering6102
    @dassengineering6102 5 років тому

    Aprilia Shiver 750 2008y.
    Hello my friends. How much is the fuel consumption of Aprilia Shiver 750 2008y. I want to buy, do you recommend it consumption, quality, comotion? Thank you.

  • @digoneitor
    @digoneitor 4 роки тому

    Hi! I want to ask you for the transparent clutch cover. Where did you buy it?

    • @DesertGoon
      @DesertGoon  4 роки тому

      Hello. 🙋🏻‍♂️ I bought it from eBay but it only suits older Shiver model. Try searching for it there... ✌🏻😎

  • @hjboerrigter8859
    @hjboerrigter8859 7 років тому +1

    Nice protection for the clutch, where can I get one?

    • @DesertGoon
      @DesertGoon  7 років тому

      I believe you're referring to this part... www.apriliaforum.com/forums/attachment.php?attachmentid=322193&d=1480270496
      You can get it from AF1 USA or corsameccanica.com/aprilia-clutch-case-protection-kit

  • @rexr2409
    @rexr2409 9 років тому

    Where did you get the belly pan? I'm looking for something similar for my bike!

    • @DesertGoon
      @DesertGoon  9 років тому +1

      +Alex mercado I bought a China-made carbon fibre belly pan. There are a few online sellers; one of them is Motocomposites. It 's listed for Dorso but should fit Shiver as well. I used an oem bracket which I ordered from AF1 but you can use a custom bracket if on limited budget.
      www.motocomposites.com/products/belly-pan-in-100-carbon-fiber-for-aprilia-dorsoduro-750-1200.html

    • @rexr2409
      @rexr2409 9 років тому

      PERFECT, thanks man! Appreciated.

  • @daveyy2096
    @daveyy2096 8 років тому

    Would You say that it has too much Power for a starter bike? Also, do i rather buy this one, or Aprilla Dorsoduro?

    • @DesertGoon
      @DesertGoon  8 років тому

      I would say the power at 95hp is just fine for a beginner. If you ride in 'T' mode it won't bite you. 😃 Dorso seat position it higher a bit and its gearing is 16/46 stock compared to Shiver's 16/44. Imo Shiver is great for commuting... ✌

    • @daveyy2096
      @daveyy2096 8 років тому

      +DesertGoon I've heard that dorso is quite heavy for a supermoto, do You think so?

    • @DesertGoon
      @DesertGoon  8 років тому

      Ducati's equivalent bike for Dorso is most likely lighter. Here are the specs for Dorso... www.motorcyclespecs.co.za/model/aprilia/aprilia_sm_750_dorsoduro.htm

    • @daveyy2096
      @daveyy2096 8 років тому

      +DesertGoon Thanks Buddy! :)

    • @DesertGoon
      @DesertGoon  8 років тому

      +Smoke You're welcome mate.

  • @hafidzmusa8795
    @hafidzmusa8795 6 років тому +1

    cantik moto bang

    • @DesertGoon
      @DesertGoon  6 років тому

      Hafidz Musa Wow! 🤓 Hello hello... Who do we have here... the famous artist! ✌🏻😃
      ua-cam.com/video/dBMXBKABMls/v-deo.html

  • @zulheikalmdzain5174
    @zulheikalmdzain5174 7 років тому

    hi bro, any advantage to install the decat?. my akra still with standard power boom. tq

    • @DesertGoon
      @DesertGoon  7 років тому +1

      Decat link pipe helps to reduce heat under the seat. It also increases exhaust sound because the gas flow is more direct. ✌☺

    • @zulheikalmdzain5174
      @zulheikalmdzain5174 7 років тому

      DesertGoon sound like a straight flow pipe. Do you think it can defect the engine on the long run?.😇

    • @DesertGoon
      @DesertGoon  7 років тому

      It shouldn't affect the engine... A catalytic converter is for reducing harmful gas (emission control) to the environment. ✌

  • @zaidstrategist
    @zaidstrategist 8 років тому

    From where did you get the rear hugger?

    • @DesertGoon
      @DesertGoon  8 років тому

      +Zaid Sern It's a Skidmarx rear hugger. They have GRP (fitted on my bike) and carbon versions (cool looking but expensive).
      www.intobikes.co.uk/products/002335/008731/Skidmarx-Rear-Hugger-suitable-for-Aprilia-Shiver-750-2012

  • @jiji5429
    @jiji5429 4 роки тому

    Salut quel est ton sabot moteur , ton capot de selle et ton leche roue ? Merci

    • @DesertGoon
      @DesertGoon  4 роки тому +1

      Bonjour. 🙋‍♂️ Mon ventre est standard pour le modèle ABS mais c'est une version carbone. La housse de capot de siège est de marque HLD que j'ai achetée sur eBay. 😎 #RideSafe

  • @batuterbang8203
    @batuterbang8203 7 років тому

    mud guard tayar belakang tu mana boleh dapat...

  • @jiji5429
    @jiji5429 4 роки тому

    Salut tu saurais me dire où ta eu ton guidon ton capot de selle et ton sabot moteur merci d’avance

    • @DesertGoon
      @DesertGoon  4 роки тому

      Salut. 🙋🏻‍♂️ J'ai acheté le fatbar LSL en ligne. Essayez de trouver celui qui vous convient ici ... www.louis.eu/katalog/marken/lsl-handlebars/92/460/340
      Mon capot de siège arrière HLD a été acheté sur eBay. Pour le pan de ventre, je l'ai acheté de Chine. À votre santé. 😎

  • @ivanduvnjakrose364
    @ivanduvnjakrose364 4 роки тому

    How tall are you man? I'm 194 and I'm looking for a bit taller bike this one seems quite tall...

    • @DesertGoon
      @DesertGoon  4 роки тому +1

      Hi Ivan. 🙋🏻‍♂️ I'm only 165cm and tip toeing while saddling the Shiver. 😅

    • @ivanduvnjakrose364
      @ivanduvnjakrose364 4 роки тому

      @@DesertGoon doesn't help me much 😂. Guess I'll just have to go and find one and ask for free ride 🤣

    • @DesertGoon
      @DesertGoon  4 роки тому +2

      @@ivanduvnjakrose364 I think with your height, if you sit on the fuel tank you can still flat foot your feet on the ground. 😁

    • @ivanduvnjakrose364
      @ivanduvnjakrose364 4 роки тому

      @@DesertGoon lol 😂😂

  • @zUltimatexIFY
    @zUltimatexIFY 7 років тому

    tumpang tanye bro. dah berapa lama bro pakai motor ni? So far ada masalah tak?

    • @DesertGoon
      @DesertGoon  7 років тому

      I've been using my Shiver since Dec 2009; no major problem so far except a MAP sensor in airbox kaput.

    • @zUltimatexIFY
      @zUltimatexIFY 7 років тому

      Map sensor in airbox tu benda masalah normal atau masalah teruk?

    • @DesertGoon
      @DesertGoon  7 років тому

      The bike couldn't be started. Just replaced the sensor and all was back to normal.

  • @kruxy404
    @kruxy404 3 роки тому

    Can you please tell me what model windscreen that is

    • @DesertGoon
      @DesertGoon  3 роки тому +1

      Hi. It's an Aprilia OEM windscreen for the first model Shiver. Originally my bike didn't come with any windscreen. www.apriliaforum.com/forums/showthread.php?182499-Shiver-windscreen

  • @fantazykory
    @fantazykory 4 роки тому

    What year is the bike?

    • @DesertGoon
      @DesertGoon  4 роки тому

      Hi Kory. It's 2009 model. #RideSafe

  • @danielgallagher6561
    @danielgallagher6561 8 років тому

    that seat concer were did u get it from

    • @DesertGoon
      @DesertGoon  8 років тому

      It's from HLD, Greece. You can search for it on eBay or try to get it from www.hld.gr/products/shiver-750-2/seat-cover/

  • @MrAndyscom
    @MrAndyscom 7 років тому

    Hello, what is this for a versesschutz on the right side

    • @DesertGoon
      @DesertGoon  7 років тому

      Are you referring to the frame slider on the chassis? If so, it's a LSL frame protector.

    • @MrAndyscom
      @MrAndyscom 7 років тому

      Hi, thanks for the quick response. But at the bottom of the clutch

    • @DesertGoon
      @DesertGoon  7 років тому +1

      Are you referring to this part...? scontent.fkul8-1.fna.fbcdn.net/v/t31.0-8/478704_10201019692716026_397646576_o.jpg?oh=f0060376538a91e7110cde2b228d238f&oe=594093BF
      It's an Aprilia OEM part which I bought from AF1.

    • @MrAndyscom
      @MrAndyscom 7 років тому

      Do you have a idee where i the can buy part? Can not find anything on the internet

  • @normanabdullah6090
    @normanabdullah6090 7 років тому

    What is the highest speed you ever ride?I am waiting for the new Shiver 900

    • @DesertGoon
      @DesertGoon  7 років тому +1

      I've only tried 206kmh but some friends hit 225-230kmh...!

  • @buyonly1620
    @buyonly1620 6 років тому

    is it possible to use clip on, on this bike?

    • @DesertGoon
      @DesertGoon  6 років тому +1

      haziq aiman Yes you can. A friend of mine fitted superbike like clip-ons and that transformed the feel and sitting position. Very much recline to the front... and ready to enjoy some twisty roads.

    • @buyonly1620
      @buyonly1620 6 років тому

      DesertGoon great!! thanks mate

  • @MrAndyscom
    @MrAndyscom 8 років тому

    Hello, what's this for a rear-guard?

    • @DesertGoon
      @DesertGoon  8 років тому +1

      I'm using a Skidmarx rear guard. They have carbon and fibre glass versions and mine is the later.

    • @MrAndyscom
      @MrAndyscom 8 років тому

      you can send the link where you can buy me maybe . thank you

    • @DesertGoon
      @DesertGoon  8 років тому +1

      Andreas Krause Here is on eBay... www.ebay.ie/itm/Skidmarx-Rear-Hugger-Black-For-Aprilia-2011-SL-750-Shiver-RH18070102-/361027121659?hash=item540ee4b1fb:g:UT4AAOSwg3FUeVkY

    • @DesertGoon
      @DesertGoon  8 років тому

      Andreas Krause From Intobikes UK... www.intobikes.co.uk/products/002335/008731/Skidmarx-Rear-Hugger-suitable-for-Aprilia-Shiver-750-2012

    • @nurihsannurihsan8822
      @nurihsannurihsan8822 7 років тому

      DesertGoon ggg

  • @SMBBM92
    @SMBBM92 3 роки тому

    2:39

    • @DesertGoon
      @DesertGoon  3 роки тому

      Hi. Starting the bike and you spotted the Matris forks...? 🤓

  • @batuterbang8203
    @batuterbang8203 7 років тому

    bos...mna nak dapt cover bawah enjin aprilia shiver tu

    • @juwelova
      @juwelova 7 років тому

      Bro boleh whatsap saya di no 017938116(kosong) untuk tempah cover bawah enjin dan mudguard tayar belakang. harga kita bincang di whasap

    • @DesertGoon
      @DesertGoon  7 років тому

      Yeah please contact Hazwan at the number given. ✌

    • @juwelova
      @juwelova 7 років тому

      Thank u bro DG for your recommendation :)

  • @normanabdullah6090
    @normanabdullah6090 7 років тому

    Never change silencer?Any Ecu upgrade or remap??

    • @DesertGoon
      @DesertGoon  7 років тому +2

      I already changed the exhaust to Akrapovic and Leo Vince decat link pipe but am still running the standard ECU. There is Bazzaz piggyback ECU option available but it's quite expensive. Anyway for a daily ride, the stock tune is good enough. 😉

  • @shkr2204
    @shkr2204 4 роки тому

    Bro....abg dpt clear clutch cover tu kt mne

    • @DesertGoon
      @DesertGoon  4 роки тому +1

      I bought it from a seller in UK many years ago. ⌛ I think you probably can find it in eBay if not mistaken but not all models can install the clear clutch cover. Please note that only the old Shiver models are applicable. ✌🏻😎

    • @shkr2204
      @shkr2204 4 роки тому

      @@DesertGoon how much does it cost 😁

    • @DesertGoon
      @DesertGoon  4 роки тому +1

      @@shkr2204 www.ebay.com/itm/Aprilia-Shiver-750-Clear-Clutch-Cover-Kit-08-12-Gold-Silver-Screws/132831239208?hash=item1eed5bdc28:g:BwsAAOSwouparDFh

  • @user-jj8bk2fx2h
    @user-jj8bk2fx2h 7 років тому

    tnt300ชัดๆ

    • @DesertGoon
      @DesertGoon  7 років тому

      บางที Benelli คัดลอกมาจาก Aprilia.

  • @楊燁-r6k
    @楊燁-r6k 6 років тому

    TNT600s father

    • @DesertGoon
      @DesertGoon  6 років тому +2

      楊燁 Yes you're right. TNT600 took a lot of cues from Aprilia Shiver...! 😃

  • @farideisz9645
    @farideisz9645 7 років тому

    this is benelli tnt600...its a joke je

    • @DesertGoon
      @DesertGoon  7 років тому

      Hahahaa... you have a good sense of humour.

  • @EstebanAGaido
    @EstebanAGaido 6 років тому

    Shiver “Factory APRC” ha!!! That doesn’t exist in a Shiver, only in RSV4. How dumb is to call it like that?

    • @DesertGoon
      @DesertGoon  6 років тому

      It's got Factory and APRC stickers affixed to the bike... Anyway you didn't get the joke. 🤣

    • @EstebanAGaido
      @EstebanAGaido 6 років тому

      I understand it´s only stickers, that´s why I don´t see the joke. Nevermind.