КОМЕНТАРІ •

  • @JoeOvercoat
    @JoeOvercoat 3 роки тому +1

    Nicest diff I have ever seen. Looks like something every basher should have.

  • @stephenberrisford4064
    @stephenberrisford4064 3 роки тому +1

    Keep coming back to this, think it’s my next truck 😍😍😍

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      It’s really neat. Use my link to buy!! 😂😂

  • @mickd8188
    @mickd8188 3 роки тому +1

    A few folks saying that the shocks leak.. but if you take care not to overfill and put some green slime on o'rings they have been perfect for me with 70w shock fluid.
    Cheers 👍

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      I didn't overfill them, when I put the caps on they were compressed so if anything there is some vacuum in the chamber

  • @urdonercjeremyburris7541
    @urdonercjeremyburris7541 3 роки тому +6

    The plug on the rear is just for looks because the full size has it

  • @davidbanaszak562
    @davidbanaszak562 3 роки тому +1

    Looks really good even in white

  • @CCxRC
    @CCxRC 3 роки тому

    I dig it! Simple white looks nice on it.

  • @17Shaky
    @17Shaky 3 роки тому +1

    Thank You so much for explaining how the overdrive to the front works.

  • @ck_lowman
    @ck_lowman Рік тому

    Thank you so much for a build video that's to the point and not 4 hours long!

    • @ExocagedRC
      @ExocagedRC Рік тому

      Well it was about 4hrs.... LOL before all the editing LOL

  • @marvinthemo-fomartian3321
    @marvinthemo-fomartian3321 3 роки тому +1

    Bought one a few months ago. Good quality stuff . 👍👍

  • @jjshobbypower9091
    @jjshobbypower9091 3 роки тому +1

    Yes!! So happy to see you with that Fusion 2in1 1800kv, I love that motor and I have it in my TRX-4. It is such a great motor! 😊👍🏼

    • @ExocagedRC
      @ExocagedRC 3 роки тому +1

      yeah and apparently I can remove the red endbell and it goes in.

    • @jjshobbypower9091
      @jjshobbypower9091 3 роки тому

      @@ExocagedRC nice.. but the red end covers the ESC isn't it?

  • @GoFastRC
    @GoFastRC 3 роки тому +1

    Loved the body, it looks very clean. I like it a lot more than the wild paint jobs that some people. Love the truck, want to pick one up but they are so expensive. Gonna wait to see your running footage and see how she does.

  • @dirtyrivrc
    @dirtyrivrc 3 роки тому +2

    That nut on the rear axle is to mimic the fill hole on the full size axle. I've seen people actually use it to fill the rear diff with grease...

  • @leestewart5424
    @leestewart5424 3 роки тому +1

    Awesome there totally worth the money one of my favorite kits running the Cliffhanger body on mine looks Excellent

  • @youknowimwhite
    @youknowimwhite 3 роки тому +1

    I'm excited for this! I just got one in the mail yesterday,

  • @kravenkrawlhobby5438
    @kravenkrawlhobby5438 3 роки тому +1

    Joe it’s about time, never had anything Vanish that wasn’t just absolutely top quality. RUN VID RUN VID RUN VID

  • @Houleigan
    @Houleigan 3 роки тому +5

    Cool kit! I almost like building them more than running them. I like the "plain" white paint job, a few black accents and yeah something on the side. Awesome job!

    • @majorkeanu3882
      @majorkeanu3882 3 роки тому

      a trick : watch movies on kaldroStream. I've been using it for watching loads of movies during the lockdown.

    • @isaiahaydin6281
      @isaiahaydin6281 3 роки тому

      @Major Keanu Yea, I've been using KaldroStream for years myself =)

    • @franksam8610
      @franksam8610 2 роки тому

      I agree

  • @apeion
    @apeion 3 роки тому +1

    I enjoyed build the 410. Everything went together smooth. Not overly impressed with the shocks and ditched the stock wheels and tires asap.

  • @dkearns04
    @dkearns04 3 роки тому +2

    On the 1:1 Currie axle the red plug is a filler plug. Very cool vehicle.

    • @JoeOvercoat
      @JoeOvercoat 3 роки тому

      For grease or oil? Grease, I would think, but who has a mini-grease gun?

    • @dkearns04
      @dkearns04 3 роки тому +1

      @@JoeOvercoat On the full size it is for gear oil. The pinion is pointed up so high the usual fill plugs are too low to get the proper amount of gear oil in there. If it opens on the scaler one could use a needle greaser to get some grease in there. That would be cool.

  • @JustCallMePCra
    @JustCallMePCra 3 роки тому +2

    I actually really like the simplicity of the body. I think it looks great!

  • @Musiquence
    @Musiquence 3 роки тому +2

    I like build videos. :) The clean and simple white body actually looks very nice. Fits the vehicle well. Looking forward to it’s maiden run!

  • @thereviewguy5598
    @thereviewguy5598 3 роки тому +2

    Try some 60 wt before the sway bar and see if that helps . That’s what I do with my heavier chassis trucks.

  • @Art-zs6sl
    @Art-zs6sl 3 роки тому +2

    Nice job! I can't wait to see it out at the Exoplex. The red cap I believe is for scale. Don't forget the loctite. Looking forward to seeing you turn this into a Class 1 contender. I have this kit for when finals are over, it's my plan to try and make mine comp worthy. Your RC channel is THE BEST thanks for all you do!

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      Thank you man, yeah I will get it ironed out as best I can

  • @augustzackery
    @augustzackery 3 роки тому +1

    The tires are really good with some break in time and a softer single stage foam.

  • @redvikinghobbies
    @redvikinghobbies 3 роки тому +1

    Love you did this vid before starting mine! Learning from a master!

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      LOL Well there are other better videos on building this.

    • @redvikinghobbies
      @redvikinghobbies 3 роки тому

      @@ExocagedRC Doubt it Joe. When you're done it'll be phenomenal. I love your builds. Addicted to watching your SV2. And you pretty much saved my interest in the RYFT. Finally got my Mambas today. And I'll probably buy Son of a Digger because of you! Great content man. Great!

  • @operation11charlieinc
    @operation11charlieinc 3 роки тому +1

    Awesome job Joe brother, love my VS4-10 Ultra, huge like brother

  • @nsrc2870
    @nsrc2870 3 роки тому +1

    Such nice trucks. I built mine about a year ago

  • @mickd8188
    @mickd8188 3 роки тому +2

    Guessing you've worked out the body locks the inner fenders in place.? I know what I think of this truck on the rocks but am looking forward to your run video and your thoughts.... especially on your sway bar comment, maybe you need to beef up the shock oil weight. I run 70w in mine on recommendation from Harley who runs 80w to 90w. So far I'm super happy..
    The tyres are the only real improvement this kit needs immediately, the extra overdrive in transmission or underdrive the rear axle is nice but not necessary.
    Hope you enjoy yours as much as I do mine.
    Cheers mate 👍

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      yeah, do the Incicsion Under drive gears fit in? I think they will but I want to be sure before ordering

    • @tcnw2005
      @tcnw2005 3 роки тому

      @@ExocagedRC yeah, the ar44 underdrive ring and pinion will go right in. They also have a 21% overdrive gear set for the transfer case.

    • @mickd8188
      @mickd8188 3 роки тому

      @@ExocagedRC yes they fit, as mentioned Ar44 and 45 cross over.
      They weren't available when I got my transmission 21% gear set.
      Oh and the diff plug is just a pretty jewel to top off these nice axles. Loctite it in..
      You don't need to run the battery tray either, chassis plenty rigid without it.
      Save weight and use slider.
      Dig unit is a nice touch also

  • @markskielliott5962
    @markskielliott5962 3 роки тому +1

    The pro is a fantastic bit of kit and it won’t need the sway bar. Just put on some firmer springs or thicker oil

  • @danwoodruff4323
    @danwoodruff4323 3 роки тому +1

    Congrats on the kit. Can not wait to see it run.

  • @djbigt126
    @djbigt126 3 роки тому +1

    Very nice.. I just got the scx10 2 unimog kit that I'm putting together

  • @whitsrcleftovers2707
    @whitsrcleftovers2707 3 роки тому +1

    The front and rear sticker thing just makes it yours/unique.

  • @CoachD386
    @CoachD386 3 роки тому +1

    Nice addition! Very good rig...

  • @xavierseitz7231
    @xavierseitz7231 3 роки тому +1

    I have one and those stock shocks like to leak oil so id switch those over to shocks of your choosing, also the stock transmission have overdrive gears which put it at 21% its still an awesome kit

  • @scooterdrum
    @scooterdrum 3 роки тому +1

    That’s the next truck I’m getting! Love the axles

  • @hossrc420
    @hossrc420 3 роки тому +1

    Thought you would of got one of these ages ago. I upgraded my Element enduro to the VS4-10 chassis over 6 months ago and it was well worth it and just added some shock keys to the rear and have achieved just over 62 degrees climb angle so far.

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      thats a good climb angle

  • @Warwick3511
    @Warwick3511 3 роки тому +2

    Harley uses around 80wt oil in the shocks on 4s.

  • @jhawk1985
    @jhawk1985 3 роки тому +1

    The stock tires have no grip. Use a different body because i think the vs4 would benifit from a lighter one. Awesone kit i bought the ultra last year. I always thought the oil plug on rear housing was for looks but i may be wrong lol

  • @clayton8465
    @clayton8465 3 роки тому +1

    I just built a 4-10 ultra. It was missing the front diff. Lol. But I had two rear diffs. And no front internals.
    I have a pro sitting in the shelf that I’ll eventually build.

  • @CCCMustang50
    @CCCMustang50 3 роки тому

    Should have used the Vanquish servo arm, it's designed to work with the suspension geometry. I use 80 wt oil in the shocks all around and stiff rear springs. Also the 21 percent overdrive really makes the pro a serious climber. Just my 2 cents after a year plus crawling with mine.

  • @sailingzigzags6511
    @sailingzigzags6511 3 роки тому +1

    Lol, Exo you got halos. I really like the white and black. Good looking rig

  • @rc-daily
    @rc-daily 3 роки тому +1

    I like the vs410. They're bad ass. I need one for myself

  • @lancelucas3023
    @lancelucas3023 3 роки тому

    The Incisions need a pretty heavy weight oil. Something like 60 F / 80 R is pretty common, as is using the medium springs in the rear (softs are included). Also, it looks like you may have missed the bolt that goes through the skid plate into the motor plate :D

  • @jamaicarctv9587
    @jamaicarctv9587 3 роки тому +1

    great built man

  • @offroad1911
    @offroad1911 Рік тому

    I wonder if the new Hobbywing Fusion SE would fit. I just got my first Pro and was going to use a Holmes stubby 2200 kv.

  • @hooligansrcadventures3729
    @hooligansrcadventures3729 3 роки тому +2

    Yessssssss I love my ultra 😍

  • @tcnw2005
    @tcnw2005 3 роки тому +2

    The vanquish trucks like heavy shock fluid, 60-90 wt is what guys usually run.

    • @ExocagedRC
      @ExocagedRC 3 роки тому +1

      I'll try that, the 40wt isn't much for it at all

  • @graymatter45
    @graymatter45 3 роки тому +1

    I put an AXE system in mine. My trick RC lighting system

  • @markcole6475
    @markcole6475 Рік тому

    I’ve just bought the same kit…awesome rig but I agree …needs rear sway bar…
    Do you have a link to a sway bar that works without a ton of mods to make it fit?

  • @bossmannrctv2683
    @bossmannrctv2683 3 роки тому +1

    Nice build. What would you consider for a trx4 pickup hard body?

    • @ExocagedRC
      @ExocagedRC 3 роки тому +1

      I've never even wanted a hardbody for a TRX so I honestly have no idea on that

  • @gravity1
    @gravity1 3 роки тому +1

    The distance between the motor plate and the transmission housing is about 59.8mm, the Fusion is 64mm long. There's no where you can grind to gain 4mm. I went through this with my VFD Capra which is over on RCCrawler.

    • @stevesrandomadventures9066
      @stevesrandomadventures9066 3 роки тому +1

      A lot of guys are taking off the red cap from the motor and stuffing it in there

    • @gravity1
      @gravity1 3 роки тому

      @@stevesrandomadventures9066 It looks like that would gain you about enough to get it to fit. The motor is pretty well sealed under the cap but it looks like the aluminum cap is acting as a heat sink for that one bit under it with the thermal pad on it. I wonder if removing it would cause heat issues with the electronics since the Fusion already tends to run warm. On the VFD transmission I put in my Capra I ended up making a 10mm longer top shaft and longer standoffs between the motor plate and the transmission case. I only have a Fusion in it at the moment but I have enough room now to fit any 550 can motor.

  • @CuciWaterjet
    @CuciWaterjet 3 роки тому

    Maaaan I’m so jealous!! Dream kit!

  • @scottishrc7857
    @scottishrc7857 3 роки тому +2

    I thought the Hobbywing FOC, The AXE 550 and the AXE 540 L, 2800kv were all about the same length

    • @ExocagedRC
      @ExocagedRC 3 роки тому +1

      not really, the 550 and 540L are about the same but the Fusion is a bit longer

  • @johnunderhill6672
    @johnunderhill6672 3 роки тому +1

    I’ll have to go on your Facebook page to post some pictures of my VS 410 body! What I did is take a chrome pen to around the windshield and upper back bed. Also made taping it off a lot easier! ~;+}>

  • @rezzrollinrc
    @rezzrollinrc 3 роки тому +1

    Nice Mr legend ✊🏽 Happy Mother’s Day y’all ✊🏽

  • @307_Scoot
    @307_Scoot 3 роки тому +1

    One day I’ll spring for one

  • @GhostRider-ii7tz
    @GhostRider-ii7tz 3 роки тому +1

    I have the same kv in my 410 works great in my opinion

  • @bobbylandicho3868
    @bobbylandicho3868 3 роки тому

    I did mine and my buddy i took end cap off and trimmed the can i bit works really great

  • @NCMOUNTAINSbackyardRC
    @NCMOUNTAINSbackyardRC 3 роки тому

    I'm jealous now lol cool stuff big like 👍💯

  • @banedt
    @banedt 3 роки тому +1

    SV2 will make that thing look silly on the course.... Wish that 1800 would've fit though, my favorite motor.

  • @edgerat
    @edgerat 3 роки тому +1

    The second time you build one is goes much faster. The first one I built took me 8hrs, second one I had running in right around 4 hours.

  • @TRKISH324
    @TRKISH324 3 роки тому +1

    That headlight/rearlight fauxpas is still way better than my idiotic choice to put the covers on the outside of my 10-3, after putting all the window covers inside. Ehat a jackass I am. Lol. Still, only my first build, paint job, but I still look at those blacked in coversand shake my head

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      lol yeah I'll get mine straightened up

  • @gonncalomariamonteiro4176
    @gonncalomariamonteiro4176 3 роки тому +1

    The amount of superlatives you used during the build made me eager to see if it will perform as good as the hype might suggest.
    This is a high end kit, and if it is twice as good as almost any other kits half this price, I'll be impressed.
    Question : Is modding that kit considered a sacrilege?
    Cheers

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      Thanks, modding happens to everything but the plan is to have a solid capable platform that doesn't need much other than tuning.

  • @fernsolo
    @fernsolo 3 роки тому +1

    Very nice 👍

  • @daver18qc
    @daver18qc 3 роки тому +1

    @5:55 You mean "step by step, oh baby" x)

  • @jonthomas8487
    @jonthomas8487 3 роки тому +1

    I still can’t get over the $750 price tag. It’s super cool that you get USA made axle housings and there’s not a lot denying that it’s the crawler kit with the most USA content so that’s worth something but not $750

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      most expensive kit I've ever bought, but in all fairness most of my builds end up about the same final cost as this one will.

    • @jonthomas8487
      @jonthomas8487 3 роки тому

      @@ExocagedRC yeah you are probably right. I’d like to see maybe better shocks and better inner fenders than the flimsy lexan. I like the Ultra version with the portals though, but that’s another +$130

  • @sitlos.
    @sitlos. 3 роки тому +1

    How long did it actually take u start to finish??? U never officially said. Great vid and lookin forward to the run video.

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      about a week or more due to having to put it aside for other video projects. I'd have to guess maybe 6hrs? Maybe less of I didn't record and just went for it.

  • @Bluemuse182
    @Bluemuse182 3 роки тому

    Don't forget the flex seal!

  • @theSvrh
    @theSvrh 3 роки тому +1

    cool looking kit, for sure wouldn't spend the money. but really cool kit

  • @CalsRcworld
    @CalsRcworld 3 роки тому +2

    Put a picture of yourself on the side. One with a big cheesy grin an a thumbs up with your logo. I recon that would look cool 😎

  • @jarek.o2663
    @jarek.o2663 3 роки тому +1

    Those axles shortly will be silver ;)
    Puller pro v 2 2700kv on 4s is perfect.

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      2700 on 4s? Wow I bet that moves on out!!

    • @jarek.o2663
      @jarek.o2663 3 роки тому

      @@ExocagedRC It's true, but low-speed control still is perfect.

  • @williamammon4899
    @williamammon4899 3 роки тому +2

    This was my favorite build.

  • @GazVanDyk
    @GazVanDyk 3 роки тому +1

    Would love one but importing to uk is way too expensive. Enjoy!

  • @cameronjr2427
    @cameronjr2427 3 роки тому +1

    Man brotha can u please do a video of the cliff Hanger body on the Vs4 10 pro to for reference. Bc there's no video of that body on a Vs4 10. I would really appreciate it. Thank you

  • @markperrella5546
    @markperrella5546 3 роки тому +1

    Rare White? How did you find that color! i searched high and low for it! Even called Sharshuding in china for some white paint! must be because you're a famous UA-camr!

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      LOL Thats LEGENDARY White!!!

    • @markperrella5546
      @markperrella5546 3 роки тому

      @@ExocagedRC i ll compete C1 with this rig?

  • @Austincarson1
    @Austincarson1 3 роки тому

    The plug on the axle housing is just for looks

  • @local24_
    @local24_ 3 роки тому +1

    Oh dang! Curious how you mod this one!

  • @brookmiller2427
    @brookmiller2427 3 роки тому +1

    I ran a 9t pinion with a 3300kv on 3s I 6% od . I now run a hh 2200kv 12pinion 3s 21% od in class one.

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      Yeah I need more OD for it

  • @glennjthompson332
    @glennjthompson332 3 роки тому +2

    I wish the LED will be automatically turn on and off with a remote from your receiver, that would be a great idea for your build.😉🏗️☕👍

    • @ExocagedRC
      @ExocagedRC 3 роки тому +1

      yeah the radio can do that with a light controller, it has 8 channels

  • @chucksrchabit.7671
    @chucksrchabit.7671 3 роки тому

    It will fit

  • @grantwitt4962
    @grantwitt4962 3 роки тому +1

    Did you put oil in the shocks

  • @stevemdelacruz5602
    @stevemdelacruz5602 3 роки тому +1

    Like main cap bearings

  • @joweemac
    @joweemac 3 роки тому +1

    Love it :o)

  • @GrimJerr
    @GrimJerr 3 роки тому +1

    What the Hell dude, your stepping on my shadow again, ha ha. I got a Ryft same time you did and we both did the Vitavon mods at the same time. (do you have a diff fix, tearing mine down this week for inspection, only 1 wheel getting power).
    Guess what showed up at my front door this morning ?
    A Vanquish VS4-10 Ultra, weirdest synchronicity going on here.

    • @GrimJerr
      @GrimJerr 3 роки тому +1

      Castle Creations Copperhead 10 Waterproof 1/10 Sensored Combo w/Slate (3800Kv) (Crawler Edition), Reefs 555 Servo, Method Beadlocks (Blue w/clear rings), with Stainless Disc weights. Blue tooth Castle Link, BS-6 Reciever.

    • @GrimJerr
      @GrimJerr 3 роки тому

      instagram.com/p/COnmI9pMjpi/

    • @Art-zs6sl
      @Art-zs6sl 3 роки тому +1

      Hopefully you'll have better luck with the vanquish!

    • @ExocagedRC
      @ExocagedRC 3 роки тому +1

      I have a feeling we will soon have some quality diff gears for this and the other Arrma and losi diffs. Just stay tuned

    • @GrimJerr
      @GrimJerr 3 роки тому

      @@ExocagedRC that's the best news I've heard in days !

  • @RIDEROFTHESTORM-in6pt
    @RIDEROFTHESTORM-in6pt 3 роки тому +1

    👍🏾👍🏾👍🏾

  • @jonathancrossman8035
    @jonathancrossman8035 3 роки тому +1

    U need to try a wpl c 34 kit

  • @xstreets10
    @xstreets10 3 роки тому

    any thoughts on running a fusion without the end cap?

    • @xstreets10
      @xstreets10 3 роки тому

      Nevermind, I did it and I don't recommend it, took the cap off and trimmed on the motor cause I didn't want to cut my vs4, but I had to trim the upper link mount s touch. It's in but I wouldn't have done it if I knew how much had to be trimmed.

  • @Nickwillfixit
    @Nickwillfixit 3 роки тому +1

    just a scale part does nothing more than look scale correct, on the 1-1 Currie axles it would be the gear oil filler.
    I have seen the body in many colours and schemes and the colour will make a break the look of the pickup body.
    Me I fancy it in the TOYOTA TRD Mickey Thompson Ivan Iron man Stewart stadium and Trophy Truck colours White, Red, Orange and Yellow.
    Nope plain white was not very high on the options so get a wrap to do the TRD race colour scheme.

  • @zizzlinz
    @zizzlinz 3 роки тому +1

    I believe that this is the rig that got too many screw to put in.

  • @tinytrucknation5051
    @tinytrucknation5051 3 роки тому +1

    Shocks look like they need heavyweight oil in them. They come empty.

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      yeah they need a lot thicker oil

  • @ashleyconnelley556
    @ashleyconnelley556 3 роки тому +2

    Yep it stews out that’s how I grease mine

  • @urdonercjeremyburris7541
    @urdonercjeremyburris7541 3 роки тому +1

    Can tell you didn't add any fluid in the shocks

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      I did, 40wt which doesn't seem to do much at all, others are saying 90wt is normal for these trucks

    • @urdonercjeremyburris7541
      @urdonercjeremyburris7541 3 роки тому

      @@ExocagedRC thicker fluid is common with alot of top heavy trucks

  • @jdsrcs8061
    @jdsrcs8061 3 роки тому +2

    Damn it, if EXO says it might fit, it will fit!!!!🤣🤣🤣🤣 Great new project, and yes you will be rough on it. A shelf queen for you will either be flying off jumps for flipping on the Crack of Doom!!!🤘🤘🤘

    • @ashleyconnelley556
      @ashleyconnelley556 3 роки тому

      That’s for sure lmao

    • @ExocagedRC
      @ExocagedRC 3 роки тому +2

      Oh I've already jumped it... and crashed... LOL

    • @jdsrcs8061
      @jdsrcs8061 3 роки тому +1

      Hahahahahaha!!!! I knew it!!!

  • @franksam8610
    @franksam8610 2 роки тому

    My Tekin has better quality than this what’s with the damage or scratches on the axle?

  • @wildmangeorgesrcchannel6916
    @wildmangeorgesrcchannel6916 3 роки тому +1

    what is it with trail trucks both vanquish and axial. the servo horn stops on the pan hard. trail trucks have been a thing for what? 15, 20 years or so? there is no excuse these days for a servo horn banging on the pan hard

    • @mickd8188
      @mickd8188 3 роки тому

      Vanquish recommends their 20mm servo horn, i didn't use a Vanquish one but it was a flat profile 20mm and clears everything just fine...

  • @chrispalmer5819
    @chrispalmer5819 3 роки тому +1

    Ported axle

  • @stevemdelacruz5602
    @stevemdelacruz5602 3 роки тому +1

    Nice but exp for me

  • @connorclark8541
    @connorclark8541 3 роки тому +1

    And still no portals

    • @ExocagedRC
      @ExocagedRC 3 роки тому

      the Ultra has portals, this is for a C1 truck so I wanted the straight axles for scale appearance

    • @connorclark8541
      @connorclark8541 3 роки тому

      @@ExocagedRC that makes more sense