I bought recently too, i am so happy have it. Its realy impressive how this little thing is desighn, so hd video. Just cool. I love it despite i love to fly with my 5 inch kwad too.
Just wanted to add something, if the board is the same as the Mobula6, then it will push out 300mW on the VTX. Happymodel doesn't state that, but it does 25, 100 and 300. Gal Kremer did the testing on it.
@@DavidReynolds-kr6yh Yeah, its kinda crazy that it will output that much. I should have put a disclaimer in saying that it could very easily have a meltdown, especially with the little copper antenna they are using, that thing bounces back a lot of energy into the board. Wouldn't be as much of an issue if you solder on a UFL and have a micro or nano antenna on it to suck up some of the heat. But then you're adding that weight. Its always push and pull in this hobby, especially on Whoops.
Looks great for such a little quad, pretty good video quality and looks like it gets a decent distance for such a small vtx. It also looked like you had fun flying it , your face was beaming.
Hi - great drone vids much appreciate them all! Question for you on the Mob6 HD -- in your vid here the copper wire VTX monopole antenna doesn't look stock (compared to what just showed up at my door yesterday at least) antenna on mine is much shor,ter and looks stock just like non-HD Mob6 --- because of HD components its much too short to sit up tall and straight. So did you add center-core copper wire of a Coaxial cable to extend your VTX? If yes, is there a precise length I need to make it to broadcast correctly for the 5.8ghz (ie how can you couple two antennas for more extension, isn't the length wrong then for tuning?) Also -- did you just solder on the extra coax? Many thanks again!! Keep 'em comin!!!
I know this might be a stupid question, as the recorded camera footage looks so good could the camera be stripped out and be attached to one of my small foamies
Input ? I am somewhat new to the hobby & asking for some input. I have the Taranis X7 receiver Mobula 6 & having fun but have been thinking on getting the DJI googles for the clear image / longer range while flying but not sure what I'm doing exactly. QUESTION IS will these three work together TaranisX7 , DJI googles & Mobula6 HD & If not what is ?....
Similar boat as you. I THINK this type (HD) drone only RECORDS in HD, not real time FLY in HD. You need an expensive digital vtx, ie: vista" or "dji air" camera/tx combination and still a receiver that will work with the taranis. Or, skip the additional receiver and buy a separate DJI radio to talk to the vista or dji air transmitter directly. It's confusing, unintentionally deceiving and expensive. A digital drone setup for this runs over $320 at the most basic. I just yesterday bought a DJI RE goggle and think I made an $ mistake.
@@derekec I know right what a learning curve we both are going through still have alot to learn but not giving up yet lol.. I appreciate the input and discussion of FPV it is how I'm learning more & more so every conversation is helpful.. 👊
hi Justin, I’m having problems flashing Betaflight firmware back to the stock one Betaflight_3.5.7_CRAZYBEEF4FR, the flashfirmware button doesn’t work even though it’s colored yellow, any suggestions??
hey justin, which tinywhoop would you recommend for starting out right now? I‘ve got the literadio2 and goggles plus some sim hours. I want to start out indoors and try to get some smooth videos for the start. The cam on this one looks fantastic. Would you recommend the Mob6HD or is it still the Tinyhawk II?
Another great video Justin! How do you feel the video from this compares to the insta360 go? I've got a tinyhawk 2 and debating which would be a better purchase - the Go or this....
@@LejTreba I did go with the insta360 go....they were running a discount for father's day so I treated myself! Today was the first day I tried it - had 3 mounts I got from someone but only got to use 1. I had been eyeing the insta even before I got the Tinyhawk so it just seemed like something I'd get more mileage from. Still have some experimenting to do but I'm happy with the footage for social media and stuff.
@@LejTreba I ordered directly from insta360. They had it for $179 plus some extra accessories. Shipped from China to US in about a week. I did also get the "care" after I activated it for $20 which covers a replacement if damaged.
You can get a analog module and a vrx for the dji goggles. But you might have to get a different radio. I recommend the Radiomaster ones or jumper. Whichever
I'm planning to pick this up as my first drone with the Taranis Q X7. Can anyone recommend a sub $150 goggle? And I'd there something else I need to get started?
Does the memory card he use helps the camera record a good hd footages? I watched other video reviews for run cam split nano but all of them has very soft image and tons of pixilation.
Thank you for the review. I'm deciding if I should get this Mobula 6 or 7 compared to Happy Model which is really good too for the price. Thank you for your honesty as well regarding flight time. I don't know why the company would put a battery that will only lasts a minute of fly time. It doesn't make any sense at all.
Order Mobula6 3 months ago, still waiting that. If it's lost and I get refund I will probably order this one and swap it to 75mm frame. Currently ordering from China looks too risky for me, multiple parcels haven't had any tracking updates for few months.
Drone Camps RC I ordered it when I see the hd footage at 3am.😂 couldn’t sleep. What was that pinkish interference flashing in your footage was that because low volt issue thing that it has.? I really do like this quad I think it’s goin to be a big hit. Ordered more 1s battery’s aswel👌🏼😜
Drone Camps RC yeah it would be nice for a update on that footage perhaps try another card. But it did look pinkish which could indicate low voltage🤔. I think you had flown for about 1min on hope particular part of the video. I’ve got some 550mah 10of them that I used on my us65 plus 12x 300mahs on the way. It looks so much fun. Look forward if you could do a update video plllllzzzz😬👌🏽😎🙌
Really wish they would start selling this camera already! Don't think I need a whole Mobula6. Although at around $100 bucks with a coupon you're almost getting a quad for free with the purchase of the camera. I'm really leery about ordering from Banggood right now though, I have 2 different packages from China that are still in the shipping stream somewhere in China since March.
I was really thinking of just getting the nano split3 lite when it comes out and sticking that on my old Mob7 since Nick Burns had good luck moving the Mob6HD to a 75mm frame, but the cam itself it won't be cheap.
BlindLuck FPV , yeah, Banggood is a bit hit and miss in their deliveries, and it’s always a gamble as to how long it could take to get something delivered.
@@DavidReynolds-kr6yh Yeah, I knew when I made my order that it was a gamble at that point. I have probably about 20 orders i've done through Banggood over the past 3 years and have never had an issue until Covid. My orders will eventually show up, if not then I'll just ask for a refund. I have one with Ali and one with BG. The BG one was just masks, but the Ali one is for the JHEMCU 30A AIO and I really wish it would show up. Pyrodrone has them now though, so I might just order one from them.
Hey, thought I would reach out to you. Wanted to thank you again for selecting me to win the Mobula 6 on your live UA-cam giveaway last Wednesday the 24th. I am still waiting on an email from Banggood. I keep checking all my email folders and have yet to see anything from them. Is there anything you can do to check if they have been trying to get ahold of me. I really look forward to it and really enjoy your channel. Keep outing out great content. God bless, Morgan
Sorry but not sorry. Im never trusting anything happymodel every again. Horrible QC. I went thru 2 of those MB7HD’s and im still trying to figure out how to fix my friends one and Its been a over a year...
EXCELLENT, IF I HAD FOUND YOU BEFORE, YESTERDAY I FLY FOR THE FIRST SEE MY TINYHAWK AND I LOST IT INSTANTLY !!! 10 SECONDS AND DISAPPEARING !!! 120 DOLLARS FLYED HAHA I HAVE TO ORDER ANOTHER TO AMAZON. WHAT DO YOU THINK WOULD YOU RECOMMEND ME OTHERS THAT WORK WITH THE SAME GOOGLES AND REMOT CONTROL ??? CONGRATULATIONS ON YOUR CHANNEL.- FROM MONTEVIDEO, URUGUAY GREETINGS ... DR. GUZMAN CEAN.- MY CURRENT EXPERIENCE IS WITH A MAVIC PRO 2 YEARS ... Read more DOES IT WORK ME WITH GOOGLES AND REMOTE CONTROL OF TINYHAWK FOR THIS MOBULA ?? I LOST MY TINYHAWK 2 ON THE FIRST FLIGHT Show less ANSWER ME SIRVE LAS GOOGLES Y CONTROL REMOTO DEL TINYHAWK PARA ESTE MOBULA?? PERDI MI TINYHAWK 2 EN EL PRIMER VUELO
I see a purple flash throughout the video, seems random, but consistent. It first happens in the DVR feed and then flashes on the hd feed. Anyone else notice this?
![☀ Cinewhoop - РАКЕТА. Лучший БК вуп с HD камерой. [Mobula 7 HD]](http://i.ytimg.com/vi/r--5-AuMaDE/mqdefault.jpg)
Wow that was really nice flying through the trees! I could see myself getting stuck several times!.
Thanks 👍
I bought recently too, i am so happy have it. Its realy impressive how this little thing is desighn, so hd video. Just cool. I love it despite i love to fly with my 5 inch kwad too.
For these 1080P recordings, you can try upscaling it to 4K, that way the youtube compression won't affect it that much
Just wanted to add something, if the board is the same as the Mobula6, then it will push out 300mW on the VTX. Happymodel doesn't state that, but it does 25, 100 and 300. Gal Kremer did the testing on it.
Thanks homie!
WOW, that’s fantastic vtx power for such a small model, only thing is that I’d be worried about it overheating.
@@DavidReynolds-kr6yh Yeah, its kinda crazy that it will output that much. I should have put a disclaimer in saying that it could very easily have a meltdown, especially with the little copper antenna they are using, that thing bounces back a lot of energy into the board. Wouldn't be as much of an issue if you solder on a UFL and have a micro or nano antenna on it to suck up some of the heat. But then you're adding that weight. Its always push and pull in this hobby, especially on Whoops.
I know it's been a while but you seem to know your stuff. Do you think 100mw is also pushing it or should that be fine?
Looks great for such a little quad, pretty good video quality and looks like it gets a decent distance for such a small vtx. It also looked like you had fun flying it , your face was beaming.
I do love exploring the upper branches of my front yard tree when all the flowers are blooming and there's no wind - which is rare for me in NE PDX.
ESP lately!
@@dronecamps Oh snap. It looks calm outside. I'd better charge up some lipos before the gorge east winds pick up LOL.
hey dude, Just brought my first fpv drone and all the kit. Great content you made my buying decision a lot easier !!
Is this compatible with e max tinyhawk rtf bundle
Hi - great drone vids much appreciate them all! Question for you on the Mob6 HD -- in your vid here the copper wire VTX monopole antenna doesn't look stock (compared to what just showed up at my door yesterday at least) antenna on mine is much shor,ter and looks stock just like non-HD Mob6 --- because of HD components its much too short to sit up tall and straight. So did you add center-core copper wire of a Coaxial cable to extend your VTX? If yes, is there a precise length I need to make it to broadcast correctly for the 5.8ghz (ie how can you couple two antennas for more extension, isn't the length wrong then for tuning?) Also -- did you just solder on the extra coax? Many thanks again!! Keep 'em comin!!!
Hi would this bind with the Taranis lite s thanks keep up the good work
Nice review dude as always, looks like another 100 quid I've spent! 😁
Can you use 2s on a Mobula 6 HD?
Hey bro, whats that purple like flash on 7:49?
Parla pa che risoluzione.... bellissimo.
That is pretty impressive!
I know this might be a stupid question, as the recorded camera footage looks so good could the camera be stripped out and be attached to one of my small foamies
Can I fly this drone with radio master tx16s?
Is it compatable with the Access , as in a FRSKY X9 Lite transmitter?
Input ?
I am somewhat new to the hobby & asking for some input. I have the Taranis X7 receiver Mobula 6 & having fun but have been thinking on getting the DJI googles for the clear image / longer range while flying but not sure what I'm doing exactly. QUESTION IS will these three work together
TaranisX7 , DJI googles & Mobula6 HD
& If not what is ?....
Similar boat as you. I THINK this type (HD) drone only RECORDS in HD, not real time FLY in HD. You need an expensive digital vtx, ie: vista" or "dji air" camera/tx combination and still a receiver that will work with the taranis. Or, skip the additional receiver and buy a separate DJI radio to talk to the vista or dji air transmitter directly. It's confusing, unintentionally deceiving and expensive. A digital drone setup for this runs over $320 at the most basic. I just yesterday bought a DJI RE goggle and think I made an $ mistake.
@@derekec I know right what a learning curve we both are going through still have alot to learn but not giving up yet lol.. I appreciate the input and discussion of FPV it is how I'm learning more & more so every conversation is helpful.. 👊
Does it bind with futaba??
hi Justin, I’m having problems flashing Betaflight firmware back to the stock one Betaflight_3.5.7_CRAZYBEEF4FR, the flashfirmware button doesn’t work even though it’s colored yellow, any suggestions??
What goggles you use?
What rx you use
Crossfire.?
Hello, propeller guards can see in all video, is it normal? I dont want to see guards on recorded video?
Hi please help me I have hapymodel mobula6 hd and beta fpv 2 se transmitter receiver D8 please tell me how contact?
sr.d8 only.???Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Nice little one.. but what concerns me are those glitches on the HD video... I never saw that on my runcams split and hybrid?
hey justin, which tinywhoop would you recommend for starting out right now? I‘ve got the literadio2 and goggles plus some sim hours. I want to start out indoors and try to get some smooth videos for the start. The cam on this one looks fantastic. Would you recommend the Mob6HD or is it still the Tinyhawk II?
Does anyone know how to get this thing to arm? I hooked it to my dx9 sticks work in betaflight but it won't arm. Can anyone help?
Another great video Justin! How do you feel the video from this compares to the insta360 go? I've got a tinyhawk 2 and debating which would be a better purchase - the Go or this....
Im in the exactly same situation bro! Cant decide between this and the insta360 on my TH II. Did you make ur decision yet? Cheers.
@@LejTreba I did go with the insta360 go....they were running a discount for father's day so I treated myself! Today was the first day I tried it - had 3 mounts I got from someone but only got to use 1. I had been eyeing the insta even before I got the Tinyhawk so it just seemed like something I'd get more mileage from. Still have some experimenting to do but I'm happy with the footage for social media and stuff.
@@craigalberts3079 Nice! Did you buy it on Banggood? (saw they had a fathers day sale)
@@LejTreba I ordered directly from insta360. They had it for $179 plus some extra accessories. Shipped from China to US in about a week. I did also get the "care" after I activated it for $20 which covers a replacement if damaged.
@@craigalberts3079 Thanks man. Gonna check it. Think i'll get it over the Mobula. Doesnit fly good with the tinyhawk?
Will it work with the dji goggles and controller fpv system? Thank you for this review. Someone recommended this drone over the TinyHawk 2
It won't as it's a analog only quad and has neither the caddx or DJI air unit
You can get a analog module and a vrx for the dji goggles. But you might have to get a different radio. I recommend the Radiomaster ones or jumper. Whichever
I'm planning to pick this up as my first drone with the Taranis Q X7. Can anyone recommend a sub $150 goggle? And I'd there something else I need to get started?
Great News! Ingas Looking for a small hd drone like this! Do you think the project mockingbird Tube of the normal mob6 will work for the hd too?
What is tx did you use for this bro?
Justin the video on this looks amazing!!! Like a GoPro!!!!! Would it still look so good if you went faster like on a 5 inch.
Does the memory card he use helps the camera record a good hd footages? I watched other video reviews for run cam split nano but all of them has very soft image and tons of pixilation.
Thank you for the review. I'm deciding if I should get this Mobula 6 or 7 compared to Happy Model which is really good too for the price. Thank you for your honesty as well regarding flight time. I don't know why the company would put a battery that will only lasts a minute of fly time. It doesn't make any sense at all.
Mobula 7
I’m new to drones and fpv so I have a question: is it compatible with any controller and goggles?
not with any controller (it depends on reveiver, it's optional, and it's compatible with regular goggles
4:39 the video flicks once. is that the hd recording?
Whats the weight difference for the Dvr to beta fpv version?
You could jog around in 3rd person if you follow yourself, that would feel weird XD
I've tried that before, its WAY harder than you would think, even if you have someone else flying the drone. it is super fun though
Order Mobula6 3 months ago, still waiting that. If it's lost and I get refund I will probably order this one and swap it to 75mm frame. Currently ordering from China looks too risky for me, multiple parcels haven't had any tracking updates for few months.
Does anyone out there know the stock factory camera settings? Thanks a bunch
Drone Camps RC I ordered it when I see the hd footage at 3am.😂 couldn’t sleep. What was that pinkish interference flashing in your footage was that because low volt issue thing that it has.? I really do like this quad I think it’s goin to be a big hit. Ordered more 1s battery’s aswel👌🏼😜
Not sure. I saw that too. Wanted people to see it. Could have been my SD card.
Drone Camps RC yeah it would be nice for a update on that footage perhaps try another card. But it did look pinkish which could indicate low voltage🤔. I think you had flown for about 1min on hope particular part of the video. I’ve got some 550mah 10of them that I used on my us65 plus 12x 300mahs on the way. It looks so much fun. Look forward if you could do a update video plllllzzzz😬👌🏽😎🙌
Really wish they would start selling this camera already! Don't think I need a whole Mobula6. Although at around $100 bucks with a coupon you're almost getting a quad for free with the purchase of the camera. I'm really leery about ordering from Banggood right now though, I have 2 different packages from China that are still in the shipping stream somewhere in China since March.
I was really thinking of just getting the nano split3 lite when it comes out and sticking that on my old Mob7 since Nick Burns had good luck moving the Mob6HD to a 75mm frame, but the cam itself it won't be cheap.
Agreed on the camera, but devil's advocate shipping things from china might be a bit more complicated right now depending on what country you're in.
BlindLuck FPV , yeah, Banggood is a bit hit and miss in their deliveries, and it’s always a gamble as to how long it could take to get something delivered.
@@DavidReynolds-kr6yh Yeah, I knew when I made my order that it was a gamble at that point. I have probably about 20 orders i've done through Banggood over the past 3 years and have never had an issue until Covid. My orders will eventually show up, if not then I'll just ask for a refund. I have one with Ali and one with BG. The BG one was just masks, but the Ali one is for the JHEMCU 30A AIO and I really wish it would show up. Pyrodrone has them now though, so I might just order one from them.
They’re fun, I have a CineBee 75, but there’s no way to get the jello out of it. Still flies every other day :-) not getting another under 3”.
Hello my friend, what is the receiver used in this drone?
Frsky SPI built in rx
@@dronecamps Wondering what would be like with the crossfire receiver
yeah, why in HD there is some purple flashes?
how do you get the hd footage?
Sd card
Could you do the emu flight and jesc uploads to get more flying time on this ?
Yes you could.
Why the hell did i buy the betafpv 65xhd? It shit the bed on me after 5 packs and beta is being horrible with customer service.
Is it Brushless Motors???
Yes
Still first
Hi is it really hd when you look at it in your goggles or no
4k next? Probably lol
Hey, thought I would reach out to you. Wanted to thank you again for selecting me to win the Mobula 6 on your live UA-cam giveaway last Wednesday the 24th. I am still waiting on an email from Banggood. I keep checking all my email folders and have yet to see anything from them. Is there anything you can do to check if they have been trying to get ahold of me. I really look forward to it and really enjoy your channel. Keep outing out great content. God bless,
Morgan
Morgan. I sent you a PM on Facebook. 👍🏻
Sorry but not sorry. Im never trusting anything happymodel every again. Horrible QC. I went thru 2 of those MB7HD’s and im still trying to figure out how to fix my friends one and Its been a over a year...
First
EXCELLENT, IF I HAD FOUND YOU BEFORE, YESTERDAY I FLY FOR THE FIRST SEE MY TINYHAWK AND I LOST IT INSTANTLY !!! 10 SECONDS AND DISAPPEARING !!! 120 DOLLARS FLYED HAHA I HAVE TO ORDER ANOTHER TO AMAZON. WHAT DO YOU THINK WOULD YOU RECOMMEND ME OTHERS THAT WORK WITH THE SAME GOOGLES AND REMOT CONTROL ??? CONGRATULATIONS ON YOUR CHANNEL.- FROM MONTEVIDEO, URUGUAY GREETINGS ... DR. GUZMAN CEAN.- MY CURRENT EXPERIENCE IS WITH A MAVIC PRO 2 YEARS ... Read more
DOES IT WORK ME WITH GOOGLES AND REMOTE CONTROL OF TINYHAWK FOR THIS MOBULA ?? I LOST MY TINYHAWK 2 ON THE FIRST FLIGHT
Show less
ANSWER
ME SIRVE LAS GOOGLES Y CONTROL REMOTO DEL TINYHAWK PARA ESTE MOBULA?? PERDI MI TINYHAWK 2 EN EL PRIMER VUELO
I see a purple flash throughout the video, seems random, but consistent. It first happens in the DVR feed and then flashes on the hd feed. Anyone else notice this?