Introduction to EDEM - Particle Flow Over Screw Tutorial
Вставка
- Опубліковано 14 лют 2019
- Hello everyone,
In this video I tried to introduce you the EDEM software, which is used for DEM ( Discrete Element Method) simulations. I created a model for transportation of particles over an helix and shown the solving and post-processing processes. I hope it will be helpful for your project.
Thank you for watching.
That is such a valuable content. Thanks man! Yasha!
Great, thanks bro.
very nice, thank you men.
Thanks!
Nice 👍🏻
Thank you
Please can you help me by a video for coating tablets and spray gun step by step
Thanks in advance
Merhaba. Video için teşekkürler. Ansys ile edem arasında veri transferini sağlayan modülü nasıl temin edebiliriz, veya EDEM den elde edilen bir sonuç dosyasını ANSYS e farklı bir formatta veri transferi için başka bir yol var mı. Teşekkürler.
please suggest best package for simulating the ball mill reactor.
Merhaba, grafik kısmında Y koordinatı yerine Z koordinatı nasıl gelir bir türlü yapamadım?
Thank you so much bro . I would like to learn something about particle analysis in rocky dem. If you have any information please share with us
Merhaba, analiz konularından bir hayli saptım bu videoları çektikten sonra. Bu sebeple Rocky DEM için video çekeceğimi pek düşünmüyorum. Umarım öğrenmek için kaynak bulabilirsiniz. Selamlar.
hello friend! i think i did something wrong in my simulation. i successfully imported the .stp file but my model becomes different from the one in my solidworks. what do you think i did wrong?
rotation kısmında "Display Vector" seçtiğimde vektör gelmiyor, sebebi ne olabilir?
Can i ask you if i want to make a simulation for coating tablets how can i choose the contact model between spray droplets bulk material and tablet bulk material and how can i have got the additional mass and volume on tablets?? Pls help me
Thanks in advance mr
when i start the simulation it says "too many grid cells" why it happened? i tried to change the value of grid cells but stilll having the same issue :( i guess my pc is too weak? or do you have any alternate way how to do it?
Merhabalar hocam uygulama da kaydedip simülasyon geçiş yapamıyorum. Kaydetme ile bi problem yaşıyorum? Yardımcı olabilir misini?
Merhaba basit ve anlaşılır bir video olmuş teşekkürler. Benzer bir uygulamada partiküller simule ederken belli bir doluluktan sonra helezonda sıkışıp patlamaya benzer bir davranış gösteriyor, her şey bir yerlere dağılıyor nerede hata yapıyorum?
Merhaba, geç cevap verebildiğim için özür dilerim öncelikle. Bu sorun bende genelde geometride boşluk olduğunda veya keskin köşeler olduğunda oluyordu. CAD modelini import ediyorsanız, modeli gözden geçirmenizi önerebilirim.
Hi. Please i have a problem with my geometry. It's empty.
I want to know if i have to download a geometric or i i have to do it in another logiciel like Solidworks and them use it in Edem?
i need simulations for like shredders breakage of particles
making complicated shapes with particles like plastic bottles :(
hello, First of all thanks for this tutorial, it was really helpful. I just have 1 Question in 15:11 you can see under the simulator grid that the Approx. Number of cells = 15984 while mine = 1 and for some reason I cant see any particles being produced although I followed you step by step, do you have any idea on how I can fix it ? thanks again.
Number of cells is defined at the simulation setup section. That section where you have Grid size. Put yours btn 2R and 3R...or you can let the software estimate it for you. But please remember that, the higher the number of grid cells, the slower the simulation. Check this video out...
ua-cam.com/video/MESYK9HPVO8/v-deo.html
Visit my page for more tips...
please where do i get the imported file?
Can you make a video for coating tablet and spray rate
How can i make the spray if any one can help me pls
2 Parçacık kümesi karıştırmak istiyorum fakat 2 tane aynı anda ekleyemiyorum eklesemde similasyonda kontak hatası veriyor çözemedim bilginiz varmıdır
Merhaba, 2 farklı malzeme tanımladıktan sonra parçacık ekleme kısmında iki şekli birbirine bitişik bir şekilde tanımlayarak, ve aralarına 'bonded contact' ekleyerek yapabilirsiniz.
@@engineeringsimulations8355 Abi mümkünse iletişime geçermisin benimle bu programla ilgili tezimde bir bölüm varda yardımcı olabilirsen çok memnun olurum mail adresim slymn.sensoy@gmail.com
thanks for the video, I cannot import the file, the green bar stops at 33%. like the others can you help with a video about it or a link or email Thanks
please send me the cad file via email. i will try to import it and send it back to you next week.
@@engineeringsimulations8355 painrikosu8@gmail.com this is my email contact me so i send you the file and tell me how i can fix it so in futore solidworks sketches i won"t face the same problem thank you
I can import files with my installation. I could not find a way to fix the ones that reported the same problem. So, send me the file that you want to use.
ansyswbtutorials@gmail.com
Please note that i am using edem 2017. if you have a newer version, i will not be able to help unfortunately :(
@@engineeringsimulations8355 just tell me how you solved the probleme i am using 2018 version but i will try what you did hopefully it will succed we hav the same problem it should work thanks
Very Nice video, I cannot import the file, the green bar stops at 33%. Please clear the problem. Thanks
I also encountered this problem. I cannot clearly remember the solution; but, I suppose that it was related with not installing a CAD import package during the setup of EDEM. Reinstalling with this package can help. Other way could be playing with importing options.
Sorry for the late response by the way.
@@engineeringsimulations8355 Please check your email.
@@ananthnarayan5472 same problm bro
@@painrikosu1017 the problem is MSC update problem. It's with visual c++ redistributable. If you find solution tell me.
Sorry man, why can't I import my geometry? It's in "step" format... but the green bar stops at 33% and doesn't go on. Have you installed something else besides the program?
Hello,
No, I did not. Maybe there is a bug in the file? Did you try to open it with a CAD software? If it can be opened with it, try to import it as a different file type, such as stp, stl, iges etc.
Also, I am not sure but I remember that the installation was asking whether you want to install some geometry readers or not, with the original software. If my suggestion above does not work, please try to reinstall the program and check whether it is asking about installation of geometry formats or not.
Note: You can also share the geometry with me to check whether I can open it or not. ansyswbtutorials@gmail.com
@@engineeringsimulations8355
The file can be opened by a CAD software... and in addition to this, EDEM doesn't open the example file with the truck, if I try to set a new file and import the geometry as you shown.
Anyway, I'll send you the file via mail in order to let you try. Thank you very much.
@@sharkracingteam1986 The same thing happens for me.
@@ananthnarayan5472 Try by changing the file name - use simple short name without dots and symbols. And English letters...
@@savata71 Thanks but that didn't work too. I think my system is lacking with software. This might be problem with processor being used.
bu görseli türkçe çekip yayınlarmısın
bro bu kadar ingizceyle neden solidi türkçe kullanıryorsun
Aslında dilini İngilizceye ayarlamışım ama Solidworks 2014 ile alakalı bir sıkıntı var dil konusunda. Bazı yerler Türkçe kalıyor her şekilde. Toollar İngilizce ama soldaki obje ağacı Türkçe falan ben de anlamadım çok :D
@@engineeringsimulations8355 teşkkürler geri dönüş için . gayet başarılı birisin sanırım
Çok teşekkür ederim.