Can you make this a series? Breaking down the elements of bags? Crossbody straps, pockets, zippers, boxing corners, adding accessories (feet, patches, d-rings, etc). I know you show us in the tutorials, but I’d like the foundations to add to ANY bag.
At last! I've wanted to know how to add a slider to straps for ages! I am a visual learner - so this tutorial is fantastic. As I use a walking stick, a cross body bag is essential. Thank you so much.
I have to give you a huge thank you 🙏 I’ve just completed my first waterproof canvas Crossbody strap. It looks amazing! I can’t get over it. I’ve made a lot of bags since I was a teen. But never made a strap with connectors. This just upped my bag game. Beyond thrilled. 😊
I was at a complete loss at how to make this type of strap when a tutorial I was watching completely skipped over this part. I was ready to cry, I couldn't figure it out on my own. I found this video and it was exactly what I needed. I was able to make the strap almost perfectly because of your help. Thank you so very much. ❤❤
This is great. Though I have made a few crossbody straps, I always have difficulty figuring out which way to add the hardware. Thanks!! Your explanation is the best!
I buy my interfacing in large quantities, so first thing I do is cut a bunch of 4” & 6” strips with my rotary cutter and ruler so they are ready for straps. When it’s time I just cut the strap fabric to the size I want and iron on the strips. I feel it’s a bit quicker than block fusing and cutting. I make a ton of bags though, so it’s convenient to keep those cuts set aside.
Thank you so much. I started using waterproof canvas from watching your tutorials. That is so far my favorite fabric. Not expensive and best part is I don’t have to interface.
Saved this one because I am FOREVER forgetting even the most basic steps with the dreaded straps. Great video and I felt like you must have seen my eye rolls every time I get to the part of the any pattern that calls for crossbody straps. “Not straps!!!” This video is going to help!
This is the best tutorial I have seen on sewing adjustable bag straps. I also watched the video on Rivet Presses and it was so helpful. Thank you Jess!
Thanks Jess!! I have, by trial and error, learned to put some kind of interfacing in my straps. I have had to remake some cotton straps that wore out before the bag did. But, another thing I do is sew 3 or 4 rows of top stitching along the cotton straps to give it more stability. That really helps!
When making a quilting cotton strap, for some bags, I like to just lay in cotton twill tape after I've pressed the fabric into a double fold. You can easily find it in either three quarters or one inch. It makes a strap that is still soft and flexible, but very strong. The top stitching will hold it in place just fine.
Thank you so much for this, Jess! I’m just starting to use waterproof canvas so that section and all the stuff on rivets is especially helpful. Who knew you are ambidextrous???😎
Thanks for these great tutorials. I love them and I'm learning so much. Thank you. I've always learned to just hold the threads in the back and handcrank the needle into the fabric and hold the threads so they don't slip away. And then start my seam with back stitching and continue the seam till the end and backstich again. this way you also don't need to use any fabric just to start a stitch/seam.
Just found you. Amazing video and I can’t wait to go watch more of what you do😊I’m 54 and just learned to sew last year in a quilting class and then decided I love to make bags way more than quilts🥰 Can’t wait to learn about rivets! Love the stripes! I’m using Tula Pink tent stripes from Lineworks…Black and white:)
Thanks for the video :) I started doing my vinyl straps double sided with one side folded vinyl and one side webbing since I noticed some vinyls are stretching and I am too lazy to also interface my straps :D I might try the edge coating now!
Jess! this was the perfect video. I literally just got a Kam snaps rivet press with hole punch and rivet dies this morning! I am so glad you showed waterproof canvas and vinyl with rivets. I have been most interested in trying those out. LOVE that striped waterproof canvas. I am also glad you decided to add the edge coat in there too. That's definitely something I want to give a shot and it doesn't look as intimidating as I thought. THANK YOU!!!
Thank you so much for this video. I just starting making crossbody bags and this was so helpful in figuring out the straps. You are an excellent teacher and I love your tutorial videos. So glad I found your channel.
New subbie. Love your channel. Complements on the way you explain everything. Love that you stick to the job at hand and clearly explain what you are doing.
This is fabulous. Sometimes I think you are a mind reader... I think of a video I want you to make and then, wallah... you make it. 😂. Thanks for another great tutorial.
I would love to have you show us how to make an adjustable purse strap, in faux leather or cork, in the style of a belt…using a belt buckle and poking holes to use with the buckle. Thanks!
I have just recently found your channel and have been viewing all your videos. I've been wanting to start making bags. I have a Brother SQ9050. I would love a beginner video. Maybe saying on what foot to use, needle, thread, and stitch? When to use interfacing, when not to, and what interfacing to use on each different piece of fabric, etc. I have already started a list of things to have from your other videos. Thought a beginner video for domestic machines would be awesome.
Thank you for the video, as always. I have sort of a question, just looking for your thoughts. So many bags have “regular” straps. Then in addition they have a cross body strap. Personally, I think they should be one or the other. I don’t like using the crossbody strap and have a bag hanging on me with the other two “unused” straps flapping around. I usually skip the crossbody and lengthen the other straps to make a comfortable shoulder bag. If I really want a crossbody, I choose a pattern with only the crossbody strap. Does that make any sense at all? Sometimes I think I’m the only person the feels that way....Thoughts?
You're definitely not the only one that feels that way! I also don't really like handle straps hanging when I wear a crossbody. I think many times bag makers (if store bought) just want to make the bag accessible to everyone.
I'm with you. If I have a handbag, I want only short straps. If I have a crossbody, I want only the crossbody strap. If a pattern has both I usually only add the one I will use, not both.
I love your tip to make the straps the same day you cut out fabric. By the time I'm finished making a bag, I get strapitis (not a word). So I hurry through the strap which can lead to mistakes and I don't enjoy the process. Also, like you said, the strap is ready to snap on when the bag is finished.
This is a very helpful tutorial. I need to make some purse straps today, and this gave me the guidance I need. Thanks! I have a different but similar rivet press. I have a hard time knowing what size rivet to use for which project. I also get confused as to whether the size refers to the diameter of the button or the length of the post. Any guidance on that and selecting size? Thank you! I love your videos and am an avid watcher.
Is it possible to fold the vinyl sides to the center, clip, and do a zigzag stitch so you don't have to have the fabrics edge on the straps edge, but only a stitch in the center of the strap??? You could use a accent thread color... Ty for the cool vid
Loved the video! I am just getting into bag making and this was very helpful, added it to my saved videos. What is the foot you used on your Bernina? I need to see if I can Find something similar for my Brother. Finally, where can you by vinyl similar to what you used? Thank again!
I’ve been watching you for at least a year, and my mind was blown when you said “As a mom...”. I had no idea you have a kid/kids. How in the heck do you manage all these projects, videos and family time? When do you sleep?? 😳
I met a woman that makes bags and she used Upholstery jute inside her straps. I just use webbing to co ordinate. I hate how short straps are. I feel like bags are up under my arm pit. The only purchased bag I got that was comfortable was Vera Bradley. I’ve had to replace straps on all my purchased bags. I like them long. I’d like to learn more about rivets. It looks more professional then top stitching.
I have noticed that the last few videos CC (closed caption) was not an option to turn on. I use CC all the time. I follow your videos all the time when I am making a project. If it's not too much to ask, can you have CC as an option. Thank you.
You would just put a rectangle ring in place of the swivel hooks and add that where the d ring connectors would go on the bag. I like to make simple colours straps that go with many bags though so I don’t have to make one for every bag!
Thanks for this video Jess. Do you think the two layers of vinyl are strong enough for a bag like Bonnie Bucket or would you think it would need to be folded over twice like the other two straps to be strong enough for a bigger bag?
I asked this question on your last video but I wanted to ask again, for a bag could you use waterproof canvas for both the outer material and the lining or would that get the too bulky? Also great video. I have been using cotton webbing for my totes but I love a prettier strap for fancier bags.
Hi Kimberly. It'll depend on your machine you're using. One of my sewing machine is a smaller brother and it doesn't like a lot of bulk but my newer machine, the brother pq1500sl, it goes right through it. I would suggest you make a small scrap made up of what it would be if you were using the waterproof canvas for both and see how your machine does.
Thanks ladies!! I've never sewn with vinyl and honestly the only bags I have done have been cotton (interfaced with sf101) and waterproof canvas. I guess I'll just have to try it and find out!
Oooooo that's a fun one to think about. I haven't sewn with denim, but I doubt you would need any interfacing. It does fray, though, so you probably want to make sure all your raw edges are tucked in or sealed.
Can you make this a series? Breaking down the elements of bags? Crossbody straps, pockets, zippers, boxing corners, adding accessories (feet, patches, d-rings, etc). I know you show us in the tutorials, but I’d like the foundations to add to ANY bag.
How do you make a long strap for a leather purse
At last! I've wanted to know how to add a slider to straps for ages! I am a visual learner - so this tutorial is fantastic. As I use a walking stick, a cross body bag is essential. Thank you so much.
I have to give you a huge thank you 🙏 I’ve just completed my first waterproof canvas Crossbody strap. It looks amazing! I can’t get over it. I’ve made a lot of bags since I was a teen. But never made a strap with connectors. This just upped my bag game. Beyond thrilled. 😊
Best video ever for crossbody straps! I love your teaching. I learn by watching and your channel is amazing! Thank you!
I was at a complete loss at how to make this type of strap when a tutorial I was watching completely skipped over this part. I was ready to cry, I couldn't figure it out on my own. I found this video and it was exactly what I needed. I was able to make the strap almost perfectly because of your help. Thank you so very much. ❤❤
You are an AMAZING teacher! I enjoyed this so much. You have a natural talent. Please make more videos. I learned so much!
You are my favorite among all the bag makers. Very clear and informative and you got very classy taste.
Man, I needed this. Everybody rushes through this, so thanks.
This is great. Though I have made a few crossbody straps, I always have difficulty figuring out which way to add the hardware. Thanks!! Your explanation is the best!
This is definitely a deep dive into a bag element. I dig it so far.
Thank you!
I buy my interfacing in large quantities, so first thing I do is cut a bunch of 4” & 6” strips with my rotary cutter and ruler so they are ready for straps. When it’s time I just cut the strap fabric to the size I want and iron on the strips. I feel it’s a bit quicker than block fusing and cutting. I make a ton of bags though, so it’s convenient to keep those cuts set aside.
Thank you so much. I started using waterproof canvas from watching your tutorials. That is so far my favorite fabric. Not expensive and best part is I don’t have to interface.
I totally agree! Waterproof canvas is fantastic!
Saved this one because I am FOREVER forgetting even the most basic steps with the dreaded straps. Great video and I felt like you must have seen my eye rolls every time I get to the part of the any pattern that calls for crossbody straps. “Not straps!!!” This video is going to help!
Good idea to make the crossbody straps first!
Thank you for this video! It is so easy to understand and your instructions are great. Your bag is very pretty!
This is the best tutorial I have seen on sewing adjustable bag straps. I also watched the video on Rivet Presses and it was so helpful. Thank you Jess!
Thanks Jess!! I have, by trial and error, learned to put some kind of interfacing in my straps. I have had to remake some cotton straps that wore out before the bag did. But, another thing I do is sew 3 or 4 rows of top stitching along the cotton straps to give it more stability. That really helps!
When making a quilting cotton strap, for some bags, I like to just lay in cotton twill tape after I've pressed the fabric into a double fold. You can easily find it in either three quarters or one inch. It makes a strap that is still soft and flexible, but very strong. The top stitching will hold it in place just fine.
I love your tutorial. You are so detailed and easy to follow instructions for any projects. Thank you for sharing your talent.
Thank you so much for this, Jess! I’m just starting to use waterproof canvas so that section and all the stuff on rivets is especially helpful. Who knew you are ambidextrous???😎
Haha only when cutting fabric!
Thanks for these great tutorials. I love them and I'm learning so much. Thank you. I've always learned to just hold the threads in the back and handcrank the needle into the fabric and hold the threads so they don't slip away. And then start my seam with back stitching and continue the seam till the end and backstich again. this way you also don't need to use any fabric just to start a stitch/seam.
So good!! You are a super instructor! Thank you so much.
Waterproof canvas is my favorite also! Great video!
Just found you. Amazing video and I can’t wait to go watch more of what you do😊I’m 54 and just learned to sew last year in a quilting class and then decided I love to make bags way more than quilts🥰 Can’t wait to learn about rivets! Love the stripes! I’m using Tula Pink tent stripes from Lineworks…Black and white:)
Thanks for the video :) I started doing my vinyl straps double sided with one side folded vinyl and one side webbing since I noticed some vinyls are stretching and I am too lazy to also interface my straps :D I might try the edge coating now!
Jess! this was the perfect video. I literally just got a Kam snaps rivet press with hole punch and rivet dies this morning! I am so glad you showed waterproof canvas and vinyl with rivets. I have been most interested in trying those out. LOVE that striped waterproof canvas. I am also glad you decided to add the edge coat in there too. That's definitely something I want to give a shot and it doesn't look as intimidating as I thought. THANK YOU!!!
Thank you so much for your class on crossbody straps. I needed this. You are great.
Thank you so much for this video. I just starting making crossbody bags and this was so helpful in figuring out the straps. You are an excellent teacher and I love your tutorial videos. So glad I found your channel.
New subbie. Love your channel. Complements on the way you explain everything. Love that you stick to the job at hand and clearly explain what you are doing.
Such a great idea about splitting up the “fun”😉!
This is just what I needed! Thanks
You gave a lot of helpful information, especially with using the edge paint 🎨🖌 Thank you for a great tutorial!!
Glad it was helpful!
I know this video is a little older but I was curious if you had a tutorial on how to make purse straps from webbing.
You just save my strap making Life 🥰
This is fabulous. Sometimes I think you are a mind reader... I think of a video I want you to make and then, wallah... you make it. 😂. Thanks for another great tutorial.
Haha thanks Jenny!
Great tutorial on straps! Thanks for sharing!
Thanks for watching!
Excellent lesson! Learned a lot. Thank you
That was awesome Jess. Thanks
I would love to have you show us how to make an adjustable purse strap, in faux leather or cork, in the style of a belt…using a belt buckle and poking holes to use with the buckle. Thanks!
Great tutorial Jess! Thank you ♥️♥️♥️
I have just recently found your channel and have been viewing all your videos. I've been wanting to start making bags. I have a Brother SQ9050. I would love a beginner video. Maybe saying on what foot to use, needle, thread, and stitch? When to use interfacing, when not to, and what interfacing to use on each different piece of fabric, etc. I have already started a list of things to have from your other videos. Thought a beginner video for domestic machines would be awesome.
Love you videos Jess!!
I’m glad you did this one!! Fun to learn!
Glad you liked it!!
I just happened across your video and LOVE it! Great tips, great instruction and I love your personality! Off to watch more... LOL
I use backpack tape instead of decovil light, for the inside of the strip. It works well for me.
Can you do video on tips on how to cut out patterns? I can never get them just right, and yours always look like they match up perfectly!!!
Yes! I've got that on my list. It's requested often.
Thanks for this helpful tutorial. 😀
Hey Jess.....this was really good timing and so needed....I learned a lot of neat and new tricks....thanks sweetie 😊
Glad to see you here Lynette!
@@OklaRoots always watching 👀 you girlie 💞
Thank you for the video, as always. I have sort of a question, just looking for your thoughts. So many bags have “regular” straps. Then in addition they have a cross body strap. Personally, I think they should be one or the other. I don’t like using the crossbody strap and have a bag hanging on me with the other two “unused” straps flapping around. I usually skip the crossbody and lengthen the other straps to make a comfortable shoulder bag. If I really want a crossbody, I choose a pattern with only the crossbody strap. Does that make any sense at all? Sometimes I think I’m the only person the feels that way....Thoughts?
You're definitely not the only one that feels that way! I also don't really like handle straps hanging when I wear a crossbody. I think many times bag makers (if store bought) just want to make the bag accessible to everyone.
@@OklaRoots Thank you! Now I don’t feel alone......😁
I'm with you. If I have a handbag, I want only short straps. If I have a crossbody, I want only the crossbody strap. If a pattern has both I usually only add the one I will use, not both.
I love your tip to make the straps the same day you cut out fabric. By the time I'm finished making a bag, I get strapitis (not a word). So I hurry through the strap which can lead to mistakes and I don't enjoy the process. Also, like you said, the strap is ready to snap on when the bag is finished.
Have you ever made the shoulder strap cushion that come with some messenger bags? it usually just slides along the strap.
Perfect tutorial🥰
This is a very helpful tutorial. I need to make some purse straps today, and this gave me the guidance I need. Thanks! I have a different but similar rivet press. I have a hard time knowing what size rivet to use for which project. I also get confused as to whether the size refers to the diameter of the button or the length of the post. Any guidance on that and selecting size? Thank you! I love your videos and am an avid watcher.
I really needed this tutorial! Thank you!
So now I know to used edge kote for my vinyl 😊
Great tips. Thank you for sharing!!
Awesome very detailed instructions! You have a new subscriber:)
You’re nearly at 100,000 subscribers!!! 🙌🏻🤩
I have been waiting to order my Kam Press until they get the pink one back in stock. Will that ever happen? I LOVE your videos!!
Is it possible to fold the vinyl sides to the center, clip, and do a zigzag stitch so you don't have to have the fabrics edge on the straps edge, but only a stitch in the center of the strap???
You could use a accent thread color...
Ty for the cool vid
Nice! Thank you
Loved the video! I am just getting into bag making and this was very helpful, added it to my saved videos. What is the foot you used on your Bernina? I need to see if I can Find something similar for my Brother. Finally, where can you by vinyl similar to what you used? Thank again!
I just started interfacing the whole piece of fabric before I cut anything
I like it way better than cutting pattern pieces then fusing
How in the world can you fuse the SF101 onto the quilting cotton on your wool pressing mat without it gunking up the mat????!!!!
Put parchment paper underneath.
I’ve been watching you for at least a year, and my mind was blown when you said “As a mom...”. I had no idea you have a kid/kids. How in the heck do you manage all these projects, videos and family time? When do you sleep?? 😳
What is "sleep"? 🤪
And a full-time job. She’s Wonder Woman
Another great tutorial thank you, just one question what weight waterproof canvas do you use or recomend
I met a woman that makes bags and she used Upholstery jute inside her straps. I just use webbing to co ordinate. I hate how short straps are. I feel like bags are up under my arm pit. The only purchased bag I got that was comfortable was Vera Bradley. I’ve had to replace straps on all my purchased bags. I like them long. I’d like to learn more about rivets. It looks more professional then top stitching.
Jess has a terrific video on rivets.
I needed this. Thanks
Glad I could help!
CAN YOU PLEASE MAKE A TUTORIAL ABOUT SEED BEADING PURSE STRAPS ASAP PLEASE!
I noticed you increase you thread tension for the thicker. Is this suggested when sewing vinyl bags? I hadn’t noticed you doing no this before.
Where did you get your cute clip basket?
Hi Jess, I also love waterproof canvas and it a lot. What thread do you recommend? I have a Juki TL 2200 mini. Thanks. Your videos are the best!!!
Is there another was to apply s rivet without the fancy press for beginners?
I have noticed that the last few videos CC (closed caption) was not an option to turn on. I use CC all the time. I follow your videos all the time when I am making a project. If it's not too much to ask, can you have CC as an option. Thank you.
Let me check on that! I always check it, but I've heard UA-cam has been delaying the CC for a few days after the videos are posting.
I use cc too so I can watch your videos without sound when I'm rocking my youngest baby in the middle of the night 🤣
Hi. I'm just learning about bag making and wonder if I can sew the ends of the waterproof canvas instead of investing in a rivet set?
Can you show how to add the adjustable strap to the bag without the swivel hooks? To save on hardware.
You would just put a rectangle ring in place of the swivel hooks and add that where the d ring connectors would go on the bag. I like to make simple colours straps that go with many bags though so I don’t have to make one for every bag!
Thanks for this video Jess. Do you think the two layers of vinyl are strong enough for a bag like Bonnie Bucket or would you think it would need to be folded over twice like the other two straps to be strong enough for a bigger bag?
If you don't mind, Jessica can you tell me where you bought third waterproof canvas the bluey and whites fabric
I asked this question on your last video but I wanted to ask again, for a bag could you use waterproof canvas for both the outer material and the lining or would that get the too bulky?
Also great video. I have been using cotton webbing for my totes but I love a prettier strap for fancier bags.
Hi Kimberly. It'll depend on your machine you're using. One of my sewing machine is a smaller brother and it doesn't like a lot of bulk but my newer machine, the brother pq1500sl, it goes right through it. I would suggest you make a small scrap made up of what it would be if you were using the waterproof canvas for both and see how your machine does.
Just like Melissa said, it really depends on the machine. If you can sew vinyl on your machine, then two layers of waterproof canvas should be fine.
Thanks ladies!! I've never sewn with vinyl and honestly the only bags I have done have been cotton (interfaced with sf101) and waterproof canvas. I guess I'll just have to try it and find out!
I would love to know the manufacturer of that type of board and accessories that is on the wall behind you.
I use annies soft and stable in some straps
Thanks!
Can I use denim for a strap or side I need interlacing?
Oooooo that's a fun one to think about. I haven't sewn with denim, but I doubt you would need any interfacing. It does fray, though, so you probably want to make sure all your raw edges are tucked in or sealed.
I have a question. How come you didn't cut along the length of the fabric? That way it would be one long continuous peice and no seam in the strap.
Subscribed!
What is the best vinyl to use for bags?
How strong is the water proof fabric?
How to I attach the hooks to my bag? Do you have a video for me?
is waterproof canvas the same thing as duck canvas?
Where did you get your vinyl?
This is from MyPunkbroidery
Where do you find that pressing pad?
Does anyone know the best size hole punch die to get, for rivets? Thanks.
Does cork work the same as vinyl?
For the most part yes. You could use edge coat on that as well, but you don't need to
I edge coat with permanent markers.
Your most tinyurls doesnt work. It say: Invalid Advertiser Id, Publisher Code, Offer, or Publisher - Advertiser Partnership Status
You should always roll the cutter up and away from you
I hate making straps of any kind…lol.
It would help EVERONE if you would look up the word STRAP and notice that there is NO SCTRAP there ..... Yikes !
Would I have to use deco-vile light on regular canvas instead of waterproof?