Thank you for teaching me exactly what I needed to know in less than 2 minutes without a 10 minute preamble about what you’re going to teach us, plus an oral history of ATVs, chains and Chinese-American trade relations/market dynamics.
Does apply to a 2020 icebear 150cc mojo magic trike. The problem is the bike fells jerky when rolling on throttle. I was towed last night, and the tow drive point out the loosen of chain. He also point out that the right side is loose will be okay to just adjust the chain or is rearend shot. Looked at it yesterday and i don't have nuts do i need to add them.
Hi Jimmy. First, thanks for posting this video. It is very short, to the point and helpful. Second, I lost one of my main four bolts. By any chance do know where I could get a replacement Bolt / Hex Nut?
Thanks for this video , I did as suggested but now both back wheels are very loose after this do you know what that could be ? Do I need to tighten the axel nuts on the wheels maybe , the nuts are tight but the wheels are very loose I didn’t know if maybe turning those jam nuts might move the rearend to where the wheels would loosen or what. Admittedly I know nothing about these things obviously , thanks for any help and thanks again for this video
One of my melta things the nuts are place of crack off of a piece.. an my chain keeps popping off, i am wondering if there's see till any way to fix it?.
is it easy to fix the transmission stick if it comes out of the transmission.to be able to shift it .from drive ..and could u be able to post a video of why it came out .
My sons brand new 125 chain came off when he hit a rock. We put it back on about 6 times from the trail to the truck. It’s only 1 week old. Got 10 hrs riding on it. Chain seems loose. Should this procedure fix the issue man?
Could be the axle's hub (the center thing) loosen the screws for that so the hub can move and adjust the chain with that, make sure both ends are straight too, sometimes the chain itself can pull on one side more than the other when the hub's loose. Tighten it when it's straight and that should work.
I have a 150cc does anyone know how i can tighten that ? I have been looking around and cant find nothing i dont really wanna mess with it without know exactly what im doing
Unknown prodigy803 need to make sure you keep the chain sprayed with a good chain lube. Also, sometimes you may need to replace the chain if the old one has stretched too much
how do u move the back axle to the left ?? my son is more to the right so I need to figure out how to move it over to line it up straight so his chain doesnt keep falling off
Elmer charles I would need to see a picture of it. Could be something is bent or sometimes over tightening one center wheel axle nut will slide the sprocket over too far
I did this and my atv just keep throwing the chain as soon as I give it throttle. Please let me know if anyone has a solution. I am at my wits end. I already changed trhe chain twice.
Thank you for teaching me exactly what I needed to know in less than 2 minutes without a 10 minute preamble about what you’re going to teach us, plus an oral history of ATVs, chains and Chinese-American trade relations/market dynamics.
Straight to the point, thank you kindly
solid how to , thanks brother for taken time to make vid
Thanks man been trying to figure this out
Thanks. Very helpful
Thanks man this helped atot
Does apply to a 2020 icebear 150cc mojo magic trike. The problem is the bike fells jerky when rolling on throttle. I was towed last night, and the tow drive point out the loosen of chain. He also point out that the right side is loose will be okay to just adjust the chain or is rearend shot. Looked at it yesterday and i don't have nuts do i need to add them.
ThaThanks for your help
Thanks bro
Hi Jimmy. First, thanks for posting this video. It is very short, to the point and helpful. Second, I lost one of my main four bolts. By any chance do know where I could get a replacement Bolt / Hex Nut?
Sal Santostefano any local hardware store should carry them. Most are metric sizes
thanks man
Hey that's my neighbors quad
Jimmy quick question my kids atv chain sprocket not turning any ideas on what going on is brand new 10hrs at the most.?
Thanks for this video , I did as suggested but now both back wheels are very loose after this do you know what that could be ? Do I need to tighten the axel nuts on the wheels maybe , the nuts are tight but the wheels are very loose I didn’t know if maybe turning those jam nuts might move the rearend to where the wheels would loosen or what. Admittedly I know nothing about these things obviously , thanks for any help and thanks again for this video
I have a leak coming from what looks like the timing chain cover? Would this cause shifting problems?
Thank You🤜🤛
Outstanding!! Thank you for the help. I have 4 Chinese quads and will need alot of help with if you are willing to share info.
Do you think that why my coolster 125 cc keeps jumping
Mine one came off after little time drive please reply
How to change the oil cc125
One of my melta things the nuts are place of crack off of a piece.. an my chain keeps popping off, i am wondering if there's see till any way to fix it?.
How do you change the timing chain like a brand new one in your hand haven't been put on yet on that same quad
What size chain 200cc coolster?
How do I replace the tension bolts the one you turned to tighten the chain mine seem striped and unable to get the chain tight enough
Jamie Barnett sometimes you have to cut them off if the nuts won’t come off.. then replace with a new tensioner and nuts
is it easy to fix the transmission stick if it comes out of the transmission.to be able to shift it .from drive ..and could u be able to post a video of why it came out .
How much does that gam nut cost the one that holds the nuts
My sons brand new 125 chain came off when he hit a rock. We put it back on about 6 times from the trail to the truck. It’s only 1 week old. Got 10 hrs riding on it. Chain seems loose. Should this procedure fix the issue man?
Could be the axle's hub (the center thing) loosen the screws for that so the hub can move and adjust the chain with that, make sure both ends are straight too, sometimes the chain itself can pull on one side more than the other when the hub's loose. Tighten it when it's straight and that should work.
First I wanna start by saying great video, however how does one replace the tensioner do you think you could explain that
I have a 150cc does anyone know how i can tighten that ? I have been looking around and cant find nothing i dont really wanna mess with it without know exactly what im doing
I got a question..it did this but after a while the chain keeps coming loose..is that normal??
that's what mines does to shit de we have to tinitnet more or leave it like that
Unknown prodigy803 need to make sure you keep the chain sprayed with a good chain lube. Also, sometimes you may need to replace the chain if the old one has stretched too much
edwin garcia make sure you are keeping the chain sprayed with a good chain lube and if the chain has stretched too much, it may need to be replaced
how do u move the back axle to the left ?? my son is more to the right so I need to figure out how to move it over to line it up straight so his chain doesnt keep falling off
Elmer charles I would need to see a picture of it. Could be something is bent or sometimes over tightening one center wheel axle nut will slide the sprocket over too far
Jimmy Rogers.. ugh do u havre email or somethin where I can send ya a pic..
m.facebook.com/LJsRepair/
I did this and my atv just keep throwing the chain as soon as I give it throttle. Please let me know if anyone has a solution. I am at my wits end. I already changed trhe chain twice.
jack nicholson Hi, it sounds like your sprocket could be loose or bent? Check that.
how do u fix the alignment like urs
do u know the measurements to do dis
I cant get my chain to tighten on my 110cc quad is there smething im doin rong
My chain keep falling out
Hey Mr.Jimmy I'm assuming when you take jam nuts off chain tensioners there are gonna be 2 nuts left you rotate clockwise to tighten chain.
What's the size of that chain
Hey real quick question how do you install a chain?
Need help with idiler tension on chain please help I think that's what it is called bc it's not doing its job how do I adjust
Not helpful
What’s the chain size