This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool ua-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.
Buenas noches amigo yo tengo un taladro Makita he 2470 igual al q acabas de reparar cuando pongo rotomartillo se patina la bronca no trabaja solo truena pero no jira se para así sea una broca de un cuarto q tendrá ojalá me puedas ayudar gracias
Hi your really good at that nust say I have a drill exactly like that the bits are falling out especially the chisel ones the drill bits don't fall out changed the ball and still happen any thoughts would be nice
Hello, do you think Makita HR2470 is a solid hammer drill to buy ? do you recommend that or another one for the price range ( even a little more) ? Thanks.
Don't buy hr 2470. It has a serious BIG problem, factory failure with OVERHEATING. I made this mistake. Bosch percussion drills are better, 2-24, 240, 2-26 etc.
@@igortrpkoski7589 Μy friend stop advertising for Bosch drills! I have found you everywhere writing the same nonsense about some supposed overheating. We understand that you have something to do with this company! What are you a representative ??
@@nickanap1854 First of all, I am not your friend. Second thing, I don' t representative Bosch, I only share my bad experience with Makita HR 2470 to all the people, not to buy this model of sds hammer drill. All the videos about this model is about 10 seconds of drilling, and about 5 sec of chisseling. Send me 200 $, the prise how much I bought it, with 3 years of guarantee, and I will sell you my makita 2470, it's not a problem. Live your life I don't spread lies that this model don't OWERHEATS. IT OWERHEATS, it's a shit of tool.
Per me makitA e un po' scaduta ultimamente basta vedere i demolitori su 10 8 rompono la bielletta cosa mai successa prima io prenderei un de Walt o un metano
Buna . La acelasi model ciocanul percutor nu functioneaza...desfacut aparatul , totul pare in regula. Totusi pare ca este ceva problema la percutor. Cilindrul este ok , pistonul de asemenea. Vreun sfat? Mersi
acho que estes marteletes especialmente o 2470 severo ter outro tipo de material na composição das engrenagens pois essas engrenagens gastam muito rápido para o preço que é
Buenos días,un favor tengo uno igual HR2450 pero no tiene loa carbones y le falta una pieza ala base de los portacarbones como se pide en la tienda makita algún código??
This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool ua-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.
NEL SERVICE Thanks Thanks Thanks. .......Genius. ....!!
The verry first hammer I put my hands on and fixed. I still think this is much more robust than the bosch equivalent
Estoy a punto de comprar el 2470 o el 2630 cual me recomienda? Cual dura mas ?
Buenas noches amigo yo tengo un taladro Makita he 2470 igual al q acabas de reparar cuando pongo rotomartillo se patina la bronca no trabaja solo truena pero no jira se para así sea una broca de un cuarto q tendrá ojalá me puedas ayudar gracias
Hi your really good at that nust say I have a drill exactly like that the bits are falling out especially the chisel ones the drill bits don't fall out changed the ball and still happen any thoughts would be nice
Hello, do you think Makita HR2470 is a solid hammer drill to buy ? do you recommend that or another one for the price range ( even a little more) ? Thanks.
Don't buy hr 2470. It has a serious BIG problem, factory failure with OVERHEATING. I made this mistake. Bosch percussion drills are better, 2-24, 240, 2-26 etc.
@@igortrpkoski7589 Can you tell me what is your experience with hr 2470 ? what did you do with ? Thanks.
sir saan po location nyo pagawa ko po HR2470
@@igortrpkoski7589
Μy friend stop advertising for Bosch drills! I have found you everywhere writing the same nonsense about some supposed overheating. We understand that you have something to do with this company! What are you a representative ??
@@nickanap1854 First of all, I am not your friend. Second thing, I don' t representative Bosch, I only share my bad experience with Makita HR 2470 to all the people, not to buy this model of sds hammer drill. All the videos about this model is about 10 seconds of drilling, and about 5 sec of chisseling. Send me 200 $, the prise how much I bought it, with 3 years of guarantee, and I will sell you my makita 2470, it's not a problem. Live your life I don't spread lies that this model don't OWERHEATS. IT OWERHEATS, it's a shit of tool.
Amigo gracias por compartir tu experiencia y no tienes éste video en tiempo normal
Per me makitA e un po' scaduta ultimamente basta vedere i demolitori su 10 8 rompono la bielletta cosa mai successa prima io prenderei un de Walt o un metano
What if the the Hummer is no longer working properly any advice
Buna . La acelasi model ciocanul percutor nu functioneaza...desfacut aparatul , totul pare in regula. Totusi pare ca este ceva problema la percutor.
Cilindrul este ok , pistonul de asemenea.
Vreun sfat?
Mersi
mai exact ce problema are, sau ce nu face?
Sind die O Ringe auch neu gekommen?
Ayudame a solucionar gira desvalanceada la broca y portabrocas
acho que estes marteletes especialmente o 2470 severo ter outro tipo de material na composição das engrenagens pois essas engrenagens gastam muito rápido para o preço que é
El mío,se en caja, y no hacé movimiento para picar comento , que será?
Punyaku buat ngebor besi dan kayu suaranya kayak ngimpak,kira2 yang rusak apa?
Bos ganti sperpat lubangnya mata bornya apa bos punyaku gk bsa di lpas
NEL Service saan po location nyo pagawa ko po sana makita HR 2470 ko, mech'l sira kumakalas yung drill
Nice shearing 👍👌
Buenos días,un favor tengo uno igual HR2450 pero no tiene loa carbones y le falta una pieza ala base de los portacarbones como se pide en la tienda makita algún código??
www.atelierultau.ro/piese-de-schimb/makita-hr2450-p-1003.html
@@nelservice6579 muchas gracias
Y la grasa ?
Quiero ver como se cambia un shok sds de makita modeloHR 2230
you pointed out the problem but did not tell how u fixed it.
the problem has been solved by replacing the two worn components, they are displayed in the clip
Creo q sería mejor si lo ubieras lavado todo como q se be mal grasa vieja i grasa nueva para q tenga mejor calidad tu chamba
Nice vid albeit speedy but Unfortunately not having the mechanical press and clamp tool means that 99% of people probably cannot make this repair.
Ok
Makita m8701
Alamatny boz
Electric not working
You should speed the video up I didn't catch it the first 20 times I watched it 🙄
:)) I tried to fit in 10 minutes so it wouldn't be boring
Koya ung Makita drills nmn my power kaso d nagana
9:36
Tidak jelas maksudnya