Generating a universal Toyota, smart key with Xhorse Key tool max pro. Reading eprom via obd with KM100 and simulating a key In order to program new key.
@@Lock-Pick-Louie you can rotate it with Movie Maker 90º left. Thank for the good video. Key Tool Max can't do it, I think with the adapter FT-OBD it will work also.
Hello, I have a Toyota Prius gen 3, 2012, the door does not open mechanically with the original key. Need key coding or how to fix it? If the 12 volt battery is dead, how can I open the car door? Thanks in advance
Get an air wedge bag and slide it between the door and car, pump the bag until you create a gap between the door and car…. Get a lockout stick and unlock the tab from the inside, pull the handle from the inside and you’ll open the door…. After that, you can remove the door cylinder as shown in the video. If your door cylinder does not have a code on it for some strange reason, you would have to buy the appropriate lishi tool for the door, pick and decode the lock, and cut the key. or you can buy new door locks and just swap them out.
I know the Xhorse can do the Smart box reset and then program a key that way. I’m not sure if it can read the key data via OBD and then simulate a smart key. That’s why I use the KM 100.
Thanks for your videos
this is very good video
Excellent video. Thanks for recording this video.
Awesome videos man. When you get a chance would love a video on adjusting frequency and prox strength with xm38 remotes.
Thanks!!!!!!
We need them full screen videos Louie
How would I do that?
@@Lock-Pick-Louie you can rotate it with Movie Maker 90º left. Thank for the good video. Key Tool Max can't do it, I think with the adapter FT-OBD it will work also.
Hello, I have a Toyota Prius gen 3, 2012, the door does not open mechanically with the original key. Need key coding or how to fix it? If the 12 volt battery is dead, how can I open the car door? Thanks in advance
Get an air wedge bag and slide it between the door and car, pump the bag until you create a gap between the door and car…. Get a lockout stick and unlock the tab from the inside, pull the handle from the inside and you’ll open the door…. After that, you can remove the door cylinder as shown in the video. If your door cylinder does not have a code on it for some strange reason, you would have to buy the appropriate lishi tool for the door, pick and decode the lock, and cut the key. or you can buy new door locks and just swap them out.
Question please! Why did you need the km100 for the second part of the programming? Doesn’t the xhorse do the same? Thnks!!!
I know the Xhorse can do the Smart box reset and then program a key that way. I’m not sure if it can read the key data via OBD and then simulate a smart key. That’s why I use the KM 100.
Thank you so much, much appreciated!!!
XSTO01EN?
just wunder if this Xhorse XSKFF0EN Smart Remote will work