How to Install Rockwell Visi Cooler | Vertical Cooler | Display Cooler

Steps To Follow While Installing Rockwell Visi Cooler
Unpack and leave idle for 2 hours.
Leave the machine idle with out running to allow the compressor oil to settle after the Shaking of the cooler during Transit Unloading or Un-packing.
Keep minimum 8 inches away from back and side walls. Don't place the cooler under direct sunlight. Don't keep anything in front of grills as it would block the air flow, reduce the cooling efficiency & increase the power consumption.
Plugin to a 5 ampere socket with proper earthing.
Run the cooler for 1 hr and load the products. This improves the cooling efficiency.
The cooler is equipped with inbuilt automatic cutoff temperature controller. The Compressor turns off after the desired temperature is achieved which saves energy.
Temperature Setting
You can turn the temperature controller knob to adjust the temperature.
Freezer Cleaning
Don't clean the machine inside or outside with any acid or corrosive material.
Luke warm water and soft cloth can be used for cleaning.
Customer Care
In case of any complaint with the product, contact Rockwell Customer care. Do not get any local or unauthorized technician to open the product as this will make the warranty void.
Contact Rockwell Customer Care @ 739-608-2323/1860-208-2323 for service/ annual preventive maintenance/ warranty extension.
.
.
.
.
.
#Rockwell #installation #customercare #Visicooler