Це відео не доступне.
Перепрошуємо.
Budget Flatbed Build for a 2010 Toyota Tacoma
Вставка
- Опубліковано 7 гру 2023
- Last Video in 2010 Toyota Tacoma Flatbed Build Series-$1000 Dollar Budget Flatbed with a steel deck, Cost Breakdown at the end of the video. Links below for all products used:
Recessed D Rings
www.amazon.com/Lonffery-Reces...
Weld on Stake Pockets
www.amazon.com/gp/product/B07...
Taillights
www.amazon.com/gp/product/B0B...
Marker Lights
www.amazon.com/gp/product/B07...
LED Pods
www.amazon.com/gp/product/B07...
Stake Pocket D-Rings
www.amazon.com/gp/product/B0C...
Backup Camera
www.amazon.com/gp/product/B06...
License Plate Lights
www.amazon.com/gp/product/B08...
Resistors for the turn signals
www.amazon.com/gp/product/B00...
Hitches for Dog Box Mounting
www.amazon.com/gp/product/B08...
Some Tools Used:
Mini Metal Saw
www.eastwood.com/eastwood-min...
Plasma Cutter
www.everlastgenerators.com/pr...
#tacoma #toyotatacoma #welding #diy #fabrication #flatbedtrucking #homemade
Follow me on Instagram OakAcreMetalWorks
Great build. Thanks for the details and breakdown.
Thank you!
Dam that things looks great
Right On 👍👊
Thank you!
That is a very good build, how much more does it weigh than normal truck bed. ??
I would say it is about 250 lbs more than the original truck bed. I would definitely recommend upgrading the suspension if you plan to build one similar. Weight could be reduced by using smaller tubing for the main frame rail.
Do you know the final weight?
We didn't weight it, but calculating it I figured it's about 400 lbs. Which was more than we wanted it to be, but it is what it is. Weight could be reduced by using smaller tubing for the two big frame rails.
Does the wheel rub?
It does on the driver side when it goes over a ditch or a hard bump, the plan right now is to put heavy duty 3" lift springs on it. Looking back on it, I should have built it higher off the frame. When I started, I had 5.5" of clearance which matched the front tires.
Where are you located
Eastern North Carolina