Front Brake Pad Change DIY Triumph Speed Triple R Brembo
Вставка
- Опубліковано 25 сер 2024
- How to change Front brake pads and clean brake caliper pistons on a 2012 Triumph Speed Triple R 1050. The replacement brake pads are OEM Triumph parts.
Speed Triple R Front and Rear brake pads, brake fluid change, front Master Cylinder replacement, and fork removal videos can be found on my youtube channel. Link below.
/ @motofun72
![[How To] Change Your Front Brake Pads (Monoblock Caliper)](http://i.ytimg.com/vi/hAUp9zZRuPU/mqdefault.jpg)
Thanks pal - just made me realise how easy it was.
Easier than most think. Good luck.
Thanks for putting the time into making this video much appreciated
+John W you are welcome.
I think that because there are no guides for the caliper you need to hand tighten them first, and then while applying the brakes torque them up. This is to perferctly align the rotor and caliper/pads.
Thank you You are very thorough and explain the details of the spring and show details that others on youtube overlook
Thank you. I hope it helped.
If you liked my video, can you please subscribe to my channel? I need help getting 1000 subscribers. Thank you!
Looks the same as my GSXR750 L1. So I will be changing mine this weekend. Thankyou
Brilliant that has just helped me out no end
I’m glad it helped you. Thanks for watching. I have more videos on this bike too.
Please subscribe to help me reach 1000. 👍🏻
Excellent video, very informative. I'm going to have a go at changing the pads on my 2011 speed triple s (non abs). Looks like pretty much the same calipers though.
+mickyp6966 yes, they are the same. Thanks and good luck!
Baby shampoo and a toothbrush to clean out pistons and calipers. Brake cleaner came about in order to clean preserving grease off discs, not to clean calipers. It attacks seals and makes them crack so unless it's a weak synthetic type I wouldn't use it.
Many thanks for your vid, great help!
Thanks for watching. Please help me by subscribing!
What's the hex wrench size to remove the two bolts holding calipers?
Good job. Thanks for sharing
So useful,thanks for sharing:)
+chwenren I am glad it helped you.
Great vid, thank you
Thanx for savings me money.
Thanks..
If you liked my video, can you please subscribe to my channel? I need help getting 1000 subscribers. Thank you!
Nice clear vid....... One query , .....Do you think it would be better to spray brake cleaner over the pistons before you push them back into the cylinders , rather than push grubby ones back into the seals ??
+Mike Crowley yes, cleaning the area first is not going to be a bad thing. Thanks for watching.
Torque-wrench ? Probably will be ok without it, but I'm a bit picky. Nice video to watch before I change my pads ! Thanks !
+boa1626 yes, having a torque wrench is always better, if you have one.
Thanks for the video ! Changed the pads today. Easy. Used my a torque-wrench at 55 Nm. All ok. :-)
Hey thanks for the video. I'm trying to find new pads for my street triple rs. Think it has the same front brake setup. Monoblock m80 and all that. What pads did you get?
I don’t know. This bike was a friend of mine. Sorry.
great videos!! your explanations are very clear. thx i just suscribe!
One question though : what kind of product do you use to clean the brakes/pistons ?
cheers
+beerforceone thanks. I use "contact cleaner" for everything I work on. I have found some "brake cleaner" eats paint off and is not good for seals/rubber parts.
+motofun thanks for the great advice!
whoa so easy i cant believe they want to charge $125 for it when the brake pad cost only $10 on ebay ....thank you !
+Mat Rog I agree.
10$ brake pads? I wonder what kind...
Do you have a link to where I can find new brake pads for my Speed Triple?
+Jake Watkins google should find site. Here is a site with WBC brakes. www.motosport.com/motorcycle/brakes
I know it has been a long time sense you made a video of the Speed Triple but I have a problem with my 2015 Speed Triple R. I have change the brake oil and clean the Brembo brake calipers completely, I even got all the pistons out and clean. The problem is that that I can have the lever pump but after a while the pressure leaves the lever wild I'm riding and I have to pump them before braking about 3 times before they brake like new. I have no idea what the problem is. Is it that the master cylinder is mets up or that the rotors are used too much. The bike have 30,000 miles.
It could be your master cylinder, but I wouldn’t buy one until you know for sure.
Watch this video and study it. This will help you determine if you have air in the system.
Brake fluid change DIY Triumph Speed Triple R 1050 ua-cam.com/video/nbZ7IVzm0Rw/v-deo.html
I'll try that again hopefully it will be that simple.
Thank you you were right, I had an air bubble in the line.
I’m glad it help. If you liked the video, please subscribe and tell your friends...lol
Hello i have the Speed Triple 1050 abs is it the Same 55 Nm??
I don’t know, but always confirm specs. My guess is yes.
Thanks for sharing! What's the model of the flex round head ratchet you're using? And it's a 1/2 inch?
Not sure, but it is a craftsman tool. Let me know and I will give you the model number on it (if it has one). I am not home right now.
I love it and use it all the time.
motofun I'd like to get that model number when convenient. I got some off brand and would rather have the craftsman
+lmind2 sorry I forgot about your request. I will get the model for you today.
+motofun Item#: 00944816000
Model#: 44816
m.sears.com/craftsman-1-2-in-drive-flex-head-quick-release/p-00944816000P?sid=IDx01192011x000001&pla&kpid=00944816000&kpid=00944816000&kispla=00944816000P
Thanks for the info. I ended up buying the telescoping Stanley flex-head for added leverage.
Will EBC HH pads fit in this caliper?
+thasmydjay I am not sure. Check out EBC site.
What is the torque spec to get them tight again
+STR Rider I am not sure of the torque. Sorry.
55nm for the Brembo monobloc calipers
Hi, you know if your pads are HH
No clue.