Dear Anurag, the work you are doing is just amazing. I really hope you can continue with your videos, they are by far the best (to my knowledge) educational resource about ADS. Thanks a lot!!
At 10:32, in "choose view for Simulation" menu, there are three options: emcosim, layout and schematic, and you told about difference in choosing "schematic" option and "emcosim" option. When one can choose "layout" option and how it is different from "emcosim" option.
Layout is not a valid choice for cosimulation, it appears in the list as there is a Layout view in your cell. You can select between emmodel, schematic or emcosim depending on what you want to simulate in the test bench.
Are you able to generate a schematic version of the layout? For example, automatic creation of the transmission lines as MSTUBs etc. I’m having issues setting up my cosim properly. I need to somehow have a schematic model to co-sim my design. My s parameters currently make no sense, -198db. Something is failing to connect but I can’t figure out what
Hello, I hope everyone is well. I'm trying to perform the co-simulation of a rectenna circuit, we have elements such as the diode in the circuit. When I simulate in the schematic I have a great s11, however in the co-simulation it works very badly. Do you know what could be happening? Furthermore, I cannot optimize the circuit with co-simulation. Thank you in advance for your attention
@@BhargavaAnurag Thanks for your reply. When I check the 3D em model it appears with a complete ground and defects on the ground don't appear. Should I do any extra steps? I draw the schematic then generate the layout, in the layout I made the changes on the ground.
Thank you for your informative videos, sir. They have been tremendously helpful for me in learning the tool and have greatly contributed to the success of my projects. I request your guidance in creating a detailed video explanation on substrate and its setup. Thank you.
How to check the output voltage Vs frequency graph, output voltage Vs input power, and efficiency Vs load resistance? In ADS for RF energy harvesting circuit
Hello, I hope everyone is well. When I'm moving on to the schematics, my layout project is on a much larger scale. Do you know what could be happening?
HI Anurag, Nice Video. Thanks for Keeping up the good work. The EM Co-simulation does the momentum simulation every time when we re-simulates the schematic for tuning. Is there any way avoid that , as we are changing only the SMD Values. Bit confused in some points 1) If I would like to Tune the SMD Values from the Test Bench, with the View selected as EMco-sim. Whether the values are visible in the Simulation Variable setup of the Test Bench. 2) I believe the schematic and the EMco-sim view generated from the Layout are independent to each other, or does the change in Emco-sim optimization affects the value in schematic 3) I thought they will be linked only when we do Layout-->Generate/update Layout Thanks Again, Theepak s
There seems to be something wrong with your setup, Momentum will not be run if you are changing only SMD values. I would recommend you to contact Keysight Europe tech support team and they can help you over live session to resolve all the issues and answer your queries.
I have never done RFIC design step by step myself so can't help much but I have posted some videos of RFIC EM simulation under RFPro 5mins Tutorials playlist if that is of some help to you.
Dear Anurag, the work you are doing is just amazing. I really hope you can continue with your videos, they are by far the best (to my knowledge) educational resource about ADS. Thanks a lot!!
Thank you so much 😀 The videos will continue to be uploaded on variety of topics so keep watching and keep learning...👍
@@BhargavaAnurag that is great news!! Thanks!
At 10:32, in "choose view for Simulation" menu, there are three options: emcosim, layout and schematic, and you told about difference in choosing "schematic" option and "emcosim" option. When one can choose "layout" option and how it is different from "emcosim" option.
Layout is not a valid choice for cosimulation, it appears in the list as there is a Layout view in your cell.
You can select between emmodel, schematic or emcosim depending on what you want to simulate in the test bench.
Are you able to generate a schematic version of the layout? For example, automatic creation of the transmission lines as MSTUBs etc. I’m having issues setting up my cosim properly. I need to somehow have a schematic model to co-sim my design. My s parameters currently make no sense, -198db. Something is failing to connect but I can’t figure out what
You are doing a wonderful job Mr. Anurag. Keep doing and cover diverse aspects. Good luck.
Thanks a ton
Hello, I hope everyone is well. I'm trying to perform the co-simulation of a rectenna circuit, we have elements such as the diode in the circuit. When I simulate in the schematic I have a great s11, however in the co-simulation it works very badly. Do you know what could be happening? Furthermore, I cannot optimize the circuit with co-simulation. Thank you in advance for your attention
Thank you for the informative tutorial. Can cosimulation be performed with DGS?
Hi Rewaa,
Yes, of course it can be performed with DGS...😊
@@BhargavaAnurag Thanks for your reply. When I check the 3D em model it appears with a complete ground and defects on the ground don't appear. Should I do any extra steps?
I draw the schematic then generate the layout, in the layout I made the changes on the ground.
Hello Anurag, The tutorial is very Informative.
Glad you liked it
Thank you for your informative videos, sir. They have been tremendously helpful for me in learning the tool and have greatly contributed to the success of my projects. I request your guidance in creating a detailed video explanation on substrate and its setup. Thank you.
Glad I could help. However, I am not clear on your substrate question but you can ask if there is any specific query in your mind.
How to check the output voltage Vs frequency graph, output voltage Vs input power, and efficiency Vs load resistance? In ADS for RF energy harvesting circuit
Hi Pradeep,
It should be pretty straightforward. Kindly reach out to you local Keysight tech support team for help.
Hello, I hope everyone is well. When I'm moving on to the schematics, my layout project is on a much larger scale. Do you know what could be happening?
You can adjust the layout look-alike symbol size
Thank you so much!
You're welcome!
HI Anurag, Nice Video. Thanks for Keeping up the good work.
The EM Co-simulation does the momentum simulation every time when we re-simulates the schematic for tuning. Is there any way avoid that , as we are changing only the SMD Values.
Bit confused in some points
1) If I would like to Tune the SMD Values from the Test Bench, with the View selected as EMco-sim. Whether the values are visible in the Simulation Variable setup of the Test Bench.
2) I believe the schematic and the EMco-sim view generated from the Layout are independent to each other, or does the change in Emco-sim optimization affects the value in schematic
3) I thought they will be linked only when we do Layout-->Generate/update Layout
Thanks Again,
Theepak s
There seems to be something wrong with your setup, Momentum will not be run if you are changing only SMD values. I would recommend you to contact Keysight Europe tech support team and they can help you over live session to resolve all the issues and answer your queries.
@@BhargavaAnurag Thanks Will do that
perfect, that was very helpful
You are doing a good work sir.. Please make videos for RF IC design in ADS Sir.
I have never done RFIC design step by step myself so can't help much but I have posted some videos of RFIC EM simulation under RFPro 5mins Tutorials playlist if that is of some help to you.
Amazing.
Thank you! Cheers!
thank you so much for making these
Glad you like them!