How to solve the problem that the Pi network node blockchain is not syncing
Вставка
- Опубліковано 16 вер 2024
- Pi network has gotten a lot of attention recently. A setup Pi node can increase the mining rate a lot. Sometimes the local blockchain height is not syncing with the latest blockchain height. I have found that running the Docker 4.5.1 version is better than updating to the newest version. It syncs the blockchain one by one and always keeps syncing. The other methods are also discussed. Keep mining. Keep Pi Network Node Blockchain Syncing. Good luck.
Download: minepi.com/zhh...
Invitation Code: zhhwang1688
Twitter
/ play4fun168
Facebook
/ zhwang168
------------------------------
We Are One by Vexento / vexento
/ vexento
Free Download / Stream: bit.ly/2PaIKcR
Music promoted by Audio Library • We Are One - Vexento (...
------------------------------
------------------------------
Music: Nirzu - Nightfall [NomiaTunes Release]
Watch: • Nirzu - Nightfall [COP...
Stream: spoti.fi/3dXRY5q
------------------------------
#TubeUnderdeveloped #Howto #3dPrinting
This video was made to help others solve their issues with the Pi Node and is a valid video to remedy the issues with the latest version of Docker Desktop. Prior to viewing this video, the node software was constantly not in sync with the node network's latest block. After following the suggestion of downgrading to version 4.5.1 of Docker Desktop, my machine is processing block at a more stable rate than it did with the latest build of Docker Desktop. Thank you for taking time to make a video on how to solve the block sync issue that many people are having. The playlist of Pi videos is also highly recommended to anyone who wishes to learn more about Pi as well as 3D printing and other topics. Cheers
Thank you very much. Have a nice day.
Thank you for this! I have downgraded docker to 4.5 and it is all working ok now. To be honest it has always worked for me until two days ago so but this has been a life saver!
Thanks for your comment. Have a nice day.
Well... I downgraded to v4.5.1 and it still does not work. Pi node sits at block 1. Ports are open. Multiple incoming/outgoing connections. The STATE seems to be stuck in "Joining SCP". Anyone have any advice on getting this working?
Hello friend, thank you very much for your information 🎉
Thanks for your comment. have a good day.
Sir you are the best when it comes to pinode! Thanks for all the help and guidance! I have two issues please:
1 my incoming connections are always : 0(zero)
2. Supporting other nides: No
Please help
Latest block sync is fine
My ports are open
I am up 24/7
Please help
Hello! Thank you very much for your help! Can you please send link to download ver 4.5.1 , latest version than can be downloaded in release note is 4.9.1
I am not sure where can find the old version now. I have searched through the Internet and also can't find an official URL to download. I have happened to get a URL that may have this file. I have no guarantee that it will work. You may try it out at your risk. Good luck.
drive.google.com/file/d/1YpASH3QYL-xe1fem_af7Bh5MQzIEK5fp/view?usp=sharing
@@TubeUnderdeveloped 🙏Thank you so much!
hey ,guys if you do not have technical background , do not do node, a lot of problem coming. you need to trouble shot it by yourself.
Thanks for your information. I am not an expert but I am pretty good at troubleshooting computers. I can fix most of the problems I think. Let's build nodes for a more mining rate. Good luck to all of us.
Very nice video. Have been trying to run a Pi node since September, 2023. Local block stuck at 1. Have spent countless hours searching Google for a resolution. Nothing definitive. Ports open. Multiple incoming/outgoing connections. Pi Node version number: 0.4.5; operating system: WINDOWS 10.0.19045. Finally realized problem might be "State: Joining SCP". Was running Docker 4.21.0, recently upgrade to v4.26.1. Must I downgrade Docker to v4.5.1? Any other advice/tips/tricks will be greatly appreciated!! TIA.
If everything is ok, then you can use the new Docker I think. If some problems occur, the easiest way is to change to the old one. LOL. Good luck.
@@TubeUnderdeveloped Well... I wasted hours and hours. I un-installed v4.26.1 and installed v4.5.1 -- NO JOY -- Still stuck at block 1 and "joining SCP"!! Installed v4.5.1 on another laptop. Doesn't work. Then installed v4.26.1 on that laptop. It doesn't work either. It's a real shame the Pi team can't/won't provide any help when things are stuck. They are the ones who can figure it out.
Same problem.
I wonder if you've fixed it by now..
I love your accent
Incoming connections "0" ? Where i could dowload version 4.5 ? I couldn't find nowwhere
you may find it in the release note.
Hi, I'm still having problems configuring my node, I've tried dozens of times (the Node applicant chat is inaccessible)
I opened the ports of my PC (firwall)
I opened the ports of my router
I installed Docker
the pi-consensus container is running
but the ports are closed when I check
what is the problem please
troubleshooting
Container
Consensus container enabled: Yes
Node switch on: Yes
PortsChecker container: exited
Consensus container: running
Consensus
State: Catching up
Protocol version: Latest
Latest block: N/A
Outgoing connections: 7
Incoming connections: 0
Supporting other nodes: No
Pi Node version number: 0.4.5
Operating system: WINDOWS 10.0.19045 (Microsoft Windows 10 Pro)
Using Docker Toolbox: No
Node installation date: N/A
Availability (up to 90 days): N/A
Thanks for your comment. I am glad you trust me for your troubleshooting. As I know you already do everything and it should be OK now. Your ports already opened since you have got outgoing connections. The incoming connections will increase later after other users find you somehow. (of course, it is automatic. -:) ). Your docker also looks fine since your consensus state is catching up. Please check the catching-up speed briefly. Such as testing for 5 minutes, how many block numbers increased for your local and whole. If the local speed is larger than the whole, it is ok since it will catch up to the whole number. Otherwise, the delay will become larger. Please check the docker version, if the version is not 4.5.1, please downgrade it. You can find the information on settings and software updates. The pi Node works very well on this old docker version. By the way, I have upgraded my Windows to 11, and it works very well. Good luck.
I just check my node, I have got 8 outcoming and 56 incoming now. LOL. It always keeps syncing, now on the best day I got more than 8 bonuses. (works as 32 teams). And sometimes got ZERO since I don't know why the computer rebooted. (That is why I upgraded to Windows 11, it bothers me too much.)
Hi
Thanks for your useful videos.
Everything things running ok except that I dont get incoming connections. I tried to find the older version of docker but couldn’t find out how to download it..couldn’t find any download buttons of a specific version..
Is it possible to run one pi node on two computers ? Is it rewarding?
Thanks for ur time 🌸
Hello. I was wondering how long does it take to have a positive Node Bonus after you have setup and running a PI node. Can you tell us how was in your case ? Thank you.
Recently the node bonus is not stable. I have the same problem. Someday I have got the bonus. I say this is my lucky day. Most of time get nothing. Just keep going. Good luck.
Hi. Tube Underdeveloped. I Run Node pi, almost 1 month. But Incoming connections: failed to increase, can you tell the reason?
Are you open the ports? You must allow the TCP/IP incoming. Also, check your router setup. You must manually configure port forwarding on the router. Good luck.
Hey, are you from Japan? Can you give reason why 4.5.1 docker version is suitable to run node and why higher docker version not compatible?
I have used docker 4.6, and it increases the delay continuously. I have tried several methods that can eliminate the delay as I explained in the video. It is not convenient. Then I changed the docker to version 4.5.1, and till now there are no delays at all. I have heard that the latest docker version 4.8 also works well but I have not tried it. Hope it will give you some help. Good luck.
@@TubeUnderdeveloped thanks
@MUHAMAD TARMIZI BIN HASHIm You are welcome. Have a nice day.
Sir. Are you talking about docker desktop ? latest is 4.20.
I am experiencing docker stop and Pi Node stop. i dont know why, suddenly you lose big chunk of blockchain and need to back them back and it take time.
Any idea why docker and pi node stop working ?
The docker that the Pi node used is not the latest version. But the old version. If you downgrade to version 4.5.1 of Docker, the problem may disappear. Please try it out and tell us the result. And I have checked the docker homepage, You can find the old version here. docs.docker.com/desktop/release-notes/#451. Good luck.
very good
Thanks. Have a nice day. Good luck.
Do i need to open the ports? I thought if you are a node it is not a necessity. I dont have acces to modem what can i do?
You should open the ports, otherwise no outside visitor to access your node. Then you will have no bonus. You must have the admistrator priority then you can access the modem control part. You should ask your supervisor to make it happen. Good luck.
The PortsCheckee container is showing absent in my troubleshooting section. What should I do?
Hi, now my docker is version 4.26.1
where do i can download docker desktop 4.5.1, thanks.
I have find this folder maybe help. drive.google.com/file/d/1YpASH3QYL-xe1fem_af7Bh5MQzIEK5fp/view?usp=sharing
I fulfilled all the conditions, but when I want to do the node button, a white screen comes up saying wait a minute, but I waited hours and the interface did not change, what to do?
I am not sure what happened. Maybe you can try the procedurer again. It seems not normal for Pi node seting. Good luck.
Hi Tube Underdevelopment. I have ports issue. When i run the check, the ports are all closed. But when Im running the node, it says its running. port 31401 31402 31403 are running. why does the ports close when I do the check?
The Pi app has delay issues sometimes. If you check several times it may change. Just run the docker and Pi node app and let it works. The command check is more reliable I think. Good luck.
Hi, my ip address is change every morning, is it possible to use DDNS (exam noip) for fix this problem, becaise many days.. my pi-node is syncing buy i does not have reward, some day has reward
If your IP address change often, then you should fix the IP address in the control center. Good luck.
Hi, I have built may node for three days, it seems ok for every item, all ports are oppened.But the Pi network is allways showing: " your computer is not running the blockchain". How can I do and expect with that? please give me some guidances, Thx!
By the way, the Oracle VM VirtualBox is been used in my system, not the Docker Desktop.
I am not sure whether the Oracle VM works or not. You can check if you have got the container or not first. After that, you are one of the candidates for the Pi node and in the blockchain list. Then you will get a bonus. Also if these do not work for you. I think you can change the VM to the Linux VM setting according to the setup procedure. The Pi node is programmed according to this setting I think. Good luck.
half hour ? 2 days and still block number1 and bucket 19/21.
Any help ? i did tried everything :S
sir finally my node is running, but no incomming connection. How to config port in router can u guide me or any video tutorial.
Congratulation. At first, the node may not get incoming. After running for a while, there will be differences. Such as at first no one knew you, then someone will find you. Wait for a little time. Good luck. You already joined the group.
Hello Sir, thank you for your beneficial information.
But I need your help: accessing the router is working, it says " the site can't be reached???" What to do?
Hello everyone after change my docker 4.5.1 the Starting ports listener not connected can you help me?
I am sorry hear that. I use the docker 4.5.1 till now. They works for me perfect. Maybe you can try the latest version for test. If it works for you, then you can use it. Hope you can find your solution. Also if you solve the problem please tell me and others. I am greatful to your help. Good luck.
my pi node app does not sync with docker. when docker start running the pi node will stop syncing. i am going to do a clean Windows installation to see if this will correct the problem.
Which version do your docker use? I have the sync issue using the latest version first. After I down grade the docker version it works for me perfect. Now I still use the old version and everything is fine. You may try this also. Good luck.
hello my friend i show that your mining from node is got more than 6 (six)..it is possible we do mining from using 1 account to more than one komputer as i knew that one komputer at know got 0,54 pi reward ??? please give me explaination thnks and good luck
Hi, i have followed both videos and the node is up and running and working. Now i'm not getting any rewards on the app for like the multiplier. It's been running for 2 days now and has a up time of like 40%. Any idea? couldn't find anything on the internet about it so note sure whats wrong
Keep going. You must run the node 7/24. Now all nodes are testing. When your node gets the container then you should get the bonus. Good luck.
What happens if a node computer runs out of ssd storage and the storage is full?
I think the computer will run very slowly and maybe crash. You can easily change to a new SSD hard disk. Now it is really cheap. GOod luck.
Hey Tube Underdeveloped why am i getting this issue Unable to reach the network, please provide the IP/domain of a known node to connect to, as well as an alternative URL to download history from.
Hello my stellar dummy not running
Hi, been running node for a couple month and on the new month start a day ago, all my node bonus has gone, back to zero, why is this. Thanks
Now a days the node bonus is not stable. Same as I. Only wait and pray the next days it will recover. Good luck.
static ip required for PI node?
I just set pi node for my pc. But it always runs on syncing on local block number 1 and no changes on the local block number and no incoming connection and outgoing connections.The state is Joining SCP. I wonder what are the problems. Is it possible if I can get some help please? Thank you very much and I appreciate the help!
I up v4.29.0 but it still Unable to reach the network, please provide the IP/domain of a known node ...Pi Node Error Fix please help thanks you
Hi how are you
My node is working perfectly but for the last one week the node reward bonus is zero
I have the same situation recently. Also a lot of pioneers have the same problems. Now the core team are testing and adjust a lot. They are still not stable yet. Hope it will improve later. Have a nice day. Good luck.
Why outgoing 8 and incoming 0 all time
Hi , I'm using docker last ver .24 I also tried 4.5.1 , the difference is in latest block in 24v max is a minute ago but state change to joining scp every min , the older version latest block reaches 5 min or more delay , my question which is better to get latest block is less than a minute or to keep state synced and have more latest block delays , thanks also I have zero incoming connection
I don't know what is better. In fact my node works like this. When the block number changes the node update immediately. I see the block number changes one by one. Not by time. I am not sure what is difference between your docker and main. I use the docker as I descripted in the video. Also I think if it is only several minutes, it may not be a big problem. LOL. Thanks for your comment. Have a nice day.
@@TubeUnderdeveloped in terms of bounes calculation I dnk if going out of synced state effects it or sending latest block faster is better but I will wait for a few days to check the result , I'm on 4.04 now, thank you for your help
@@tamermosaad3166 Good luck.
@@TubeUnderdeveloped you still using 4.5.1 v , have you tried 4.20.1 v
not working on Mac it says
We couldn't reach the required ports on your machine.
Please double-check your configuration.
Port
Status
31400
NOT OPEN
31401
NOT OPEN
31402
NOT OPEN
31403
NOT OPEN
31404
NOT OPEN
31405
NOT OPEN
31406
NOT OPEN
31407
NOT OPEN
31408
NOT OPEN
31409
NOT OPEN
me keep local block 1 number how i to do ?
Please check your local network setting. Good luck.
Hi my pi node appears this how to fix ? your computer is syncing with the blockchain (it may take hours) 19/21(90%) thanks you so much
share me pi node sign in code
When you logon to your node that is installed on your computer, it will ask you to provide a node code. This code is linked to your Pi app on your smartphone. I don't have that code which indicates that you are the owner of this node. So please input this code yourself. This will pair your Pi app with your node application. Then after some period you will get the node bonus when you get the node container from Pi official server. Good luck.
My node bonus only reduces if I have not clicked in the app for more than 12 hours. If I click in the app every day my bonus is always high(ish) 0.67 per hour Now it is 0.59 as I did not click quickly enough.
Thanks for your comment. My node bonus also fluctuates all the time. I often check if everything is fine. Good luck.
I run node on my amd pc for 12 hours next day reward is only 0.28 coin . Is something wrong.
@@harrykambo1987 Congratulation. You are in the club now. The bonus will change continually. If you run the node longer, the stable will be. Just keep it running 24/7. And often check if your node is running. My node sometimes stops running caused of some problems I have not mentioned. And I often get the update notice to Windows 11. Too boring even though I think I already close the update function. Now I am updating to Windows 11. If something is wrong, maybe I will downgrade to Windows 10 again. LOL.
@@harrykambo1987 I do run mine 24 hours a day. 0.28 is good for 12 hours a day
Hi mate, thanks for your video. I have followed your video that I downgrade my Docker to 4.5.1 from 4.8. My pi node is 0.7.1 version. But my local block is still not synching. can you help please?
My Pi node version is 0.4.5. You can see this from the Troubleshooting page. I don't know why your Pi node version is 0.7.1. Please make sure you download them from the official homepage. Also, check other options that relate to the node. Such as opening the ports and changing configuration in router setting, etc. Good luck.
Really appreciate your reply! Just double checked my Pi node that is 0.4.7 (sorry, I was wrong). I downgraded the Docker to 4.5.1 as you showed in your video. Also I checked my ports are open. What can I check on my router? The IP address, TCP, ....look correct.
@@alanchen6231 Hi, friend. How long do you set up the Pi node? In the first period, you will not get the bonus. Only after you have got the container then you will have the chance to get the bonus. Maybe you just wait for a little while then you will get paid. Good luck.
@@TubeUnderdeveloped do you still use 4.5.1? Is it okay if we not update docker?
@@monkeydluffy6247 I am still using docker 4.5.1. It works very well for me. It should be ok since the Pi node official website doesn't inform us to upgrade. Of course, you can also upgrade to the latest version for test. I have heard someone use them and it works also good. For me now I just follow the Pi Node official step. Hope it will help you a little. Good luck.
Hello anyone please help port not opening
Sometimes it will not open. Try again or access the router configuration part to check if everything is ok. Good luck.
My account's password has been compromised. Do you have any way to retrieve the lost cryptocurrency faster than they can? I got locked out twice. The first time, they took almost 1,000 pi. And the second time, it was another 2,550 pi. Can you help me with this?
I am sorry that you are experiencing this problem, but I am not sure if I can help you. In fact, the account password is crucial and one must always pay attention to avoid losing or leaking it. In your case, contacting the Pi Network technicians may provide some assistance. I'm sorry for your loss. Good luck.
@@TubeUnderdeveloped I am unable to contact the technical support team.
Can you help me?
i still cant get the ports open :(( , can somebody help me remote? thank you, i tried everything
What pc are you using
Please check the tutorial video that teach you how to open the ports. And only some of the ports are used now. Good luck.
Bogdan I have successfully ran the node and opened my ports on both the Mac and windows. Please state your system and I can try and solve your problem.
@@says4r281 windows 11, i7, 16gb ram, GeForce 1070ti 8gb
@@says4r281 how can we contact each other?
I simply cannot get my ports open :
31400
is closed
31401
is closed
31402
is closed
31403
is closed
31404
is closed
31405
is closed
31406
is closed
31407
is closed
31408
is closed
31409
is closed
I am not sure what is the problem. Please check if the other setting is OK. And sometimes this happened. I only simply restart the Node and it recovered. Hope you will get through it. Good luck.
You are going to fast and I can't understand this video 🤔