Deeper CHIRP+ Pro range extender - Deeper chirp WIFI Bridge - wifi booster
Вставка
- Опубліковано 30 гру 2020
- Create WIFI Bridge for your Deeper CHIRP+ Sonar. Range 300M+
Attach Deeper with 3D printed mount outside boat or build-in the device in the baitboat.
No modification on Deeper CHIRP+ needed.
VAP11S weight only 80 GRAM!!!! 94mm x 45mm x 15mm(L x W x H)
IMPORTANT NOTE!!!!
Change the suggested SSID hotspot name and always increase a number or letter (depending on original Deeper name)
For example Deeper CHIRP + 8211 would be Deeper CHIRP + 8212
Deeper CHIRP + FB3C would be Deeper CHIRP + FB3D
Parts needed:
VONETS VAP11S: nl.aliexpress.com/item/400084...
ABS Case 250x200x76mm: nl.aliexpress.com/item/400076...
2.4Ghz 6dBi Antennas (Female): nl.aliexpress.com/item/329523...
SMA Male - Female cables: nl.aliexpress.com/item/100500...
Thanks for putting this up, much better and cheaper than the options out there.
Спасибо большое
Hi. Thx for this clear video. Works fine with my wifi module in the boat, to extend my signal fot the autopilot! About 250 mtrs with the standard Vonets antenna`s. But why not on the boat and on the bank 6 dbi antenna`s? In the video you say just on the bank.
Hi, thanks for taking the time to make this video. If I just want to use one Vonets VAP11S to connect with my Deeper Pro+ then I don't need the Bridge. Is this correct? I only want to use it at about 100-150 metres.
hi nice video, wouldn't one vonets be enough for a distance of around 150 m?
easy instruction. using one in the boat and one on land and have 190m range now with aliexpress feeding boat
Do you have 2.4ghz boat? Doesnt it cause interface with the deeper?
@@bencelanczos yes. The basic 3 loads Chinese boat from Ali express for around 150 Euro
@@andreaskrause Does the deeper interface with the boat? (Cause they are both on 2.4ghz)
Did you change the antennas with new 8dBi antennas. This is how you achieved 300m?
Can this also be used with a wifi esp acces point in the baitboat. For GPS range extension?
Hi, thanks for this info! I currently have my deeper chirp connected to one bankside vonets extenders set up as you described, what are the benefits of using two? Cheers
More range. What range do you get with one at the bank side?
Hey, so not to sure, I had it on my boat and taken it as far as I could without any loss, it was around 140 yards then I got scared I’d lose the boat 😂
Hi David i see in comments u use only one of the extender do u use it as brigde or as router, thx
@@MrKato84 hello, it’s just a bridge I think but it goes a long long way
@@Daverave69 please kindly give step by step details i want to use on my chirp 2 just as a bridge like u have mentioned or any video or link if u have pls provide .sorry for the trouble..many thanks
Good job! Antenas on a bait boat are inside the boat or we need to put it outside?
Prefer on the outside.
@@baitboatch7177 What about interference? I am using 2.4Gh rc transmiter and I have a problem with interferences. If I use 2 vonets, will I still have interference?
@@jernejaudiox What brand transmitter?
@@baitboatch7177 Spectrum dx5e
@@jernejaudiox Myself using the FlySky FS-I6 with 2.4Ghz frequency hopping. I don't know if the Spectrum also hops on 2.4Ghz channel?
VONETS VAP11AC Dual Band 2.4G 5G Wireless Portable Wifi Repeater Bridge Router 300Mbps+900Mbps ITS not better? Thnx
VONETS VAP11S- 5G mini router wifi bridge repeater ap signal amplifier wifi to cable (The Speed of Lan interface is 100 Mbps) ITS not better? Thnx so much
Can I bridge the antennas?
Hi!
The gps function also work with the range extender?
Thanks
no
@@andreaskrausethanks
Salut pourquoi tu Active mac layer transparent
Bonjour ,très bonne video ! est-ce valable pour Deeper pro + ? Merci !
Bonjour, cela fonctionne de la même manière pour le Deeper Pro. Vous devrez utiliser le mot de passe (12345678). Cela ne s'applique pas au CHIRP +
@@baitboatch7177 hi Hello, I added single vonets, it can be seen on my phone, I also changed the antennas, the distance is 100 meters.
I choose the ip layer, mac layer does not appear on my phone at all can you help me thanks
Hello, good job! I have a problem configuring the vonets. : In the step of "wifi hotspots" I get a box to put a password, if I do not enter it, it does not let me apply the parameters, and if I enter a password (12345678) it stays loading forever. please help!
What browser are you using? Try different one for example Chrome or Firefox, Edge etc.
@@baitboatch7177 I have tried with different browsers, but in the security settings menu it always asks for a password (Source WiFi hotspot password). and already in that step I cannot continue to one that puts keys.
Can I contact you through another means of contact? to send you a video or photos? thanks greetings.
is it the chirp or the pro+ you have?
hey, i have a deeper pro plus, can i use the same vonets just to have stable conection at 100m casting the deeper ? the deeper s network wifi name is deeper pro +365, do i have to make exactly all the steps that you made in the configuration ? what name i give to the ssid of vonets ? thank you
Hello, you should name the new SSID "Deeper Pro +366"
@@baitboatch7177 thank you ! Well I am making tests with a tplink router wr940n and for the moment distance was 154m with other device next to the deeper :)
@@techcarp TP-link standard firmware (20dBm / 100mW). With Open-WRT this could be up to (26dBm / 398mW). Vonets VAP11S maximum power is 23dBm / 200mW
i can not see any answers. i have the same problem HELP!
@@baitboatch7177 please help to use just as bridge for chirp 2 with dlink N300 .many thanks
tell me which vonets vap11s 2.4g or 5 g? thanks in advance
have you ever seen vap11s in 5ghz ?
what is the difference between ip layer and mac layer transparent
To musisz dać na MAC bo ja próbowałem wile razy i nic, a jak zrobiłem jak na Video, że MAc to odpaliło. Dzięki dla Autora !
I used a flysky rc controller 2.4ghz but I have a Interference ...CAN BE RESOLVED ?
i use flysky 6ix never have problems .try to change wifi channels
подскажите какой vonets vap11s 2.4g или 5 g? заранее спасибо
Как работает?
Bonjour ! J'essaie de faire la connection avec un seul vonets mais le deeper n'est pas reconnu par l'app. Testé avec un smartphone et une tablette android et avec les deux appli deeper. Auriez-vous une idée ? Merci d'avance pour votre aide .
I have the same Problem. Can you help pls :)
I have fix it. You must change only the last Number of wlan Name. Its work now 🤙 thank you for send this nice Video.
Let's try this !
It's working 👍 thanks !
funktioniert leider mit deeper pro+ nicht, also mit einem Vonets Modul....macht mir 2x das gleiche Wifi Netz verfügbar nur bei einem ohne vonets gehts halt wie normal....
It works for pro+ to. Just chance the last letter in a number and it will work
@@johankoopmans1037 I don't understend this last letter. Author is chcnging pretty a lot he get rid of "_2.4G_B8" so it is not only the last letter, what You are talking about ?
On Android it works all right. On iOS it doesn’t.... The Deeper simply won’t connect. Too bad. Anybody any ideas?
Using the Samsung Galaxy Tab A 2019 model myself. Unfortunatly no Apple device so i couldn't tell
Just got a huawei p9 from a friend; it’s an oldy but it works brilliantly! As soon as the weather permits I’m gonna test it. Thanks for this post!
Got it to work on an old Ipad running Ios12. It did not work on Ios 14. Read somewhere Apple introduced stuff in Ios13 that make the vonets not working in this configuration.
Works perfectly with my LG G6 phone but not with my LG V30 phone.
see nothing youtube blocks content sinds a couple of days