This is a fantastic video, Thanks. I've been needing a new phone, as my Galaxy-Prime is out of date now (over seven years old), and this video has convinced me to bite the bullet and get a new phone. I'm pretty handy with repairs, but this looks like it would be pretty difficult for me to do. Thanks again for such a good tutorial.
Straight forward instructions for soldering a new charging port. Thank you for keeping it simple and pointing out the difficult part on soldering the micro pins to mother board.
Thank you so much sir for giving us all the knowledge for repairing charging pin. Especially like me im just new in phone repair. I reall want to be a good in androin phone repair. By the way. Its june 5 2020 Watching from philippines.
I wish this had shown instead of some other videos. You explain why to do something and technique that others dont show or talk about. I replaced the screen on my j7 and now it won't turn on. It also has a charging port problem. I will look and see if you have videos about that but I wanted to say best video I have seen on the subject. Nobody else talked about the little prongs or the little wires. The just did the 4 big ones and that was it. Thanks again.
Excelent cideo. Very informative with great visual showing and verbal explanation. I have a Samsung Galaxy Core Prime that has a charging port that needs to be replace, which as the charging port on my phone and the phone you used are the same, this video will help me in replacing mine.
Nice video! Novice question: After having essentially ripped the two halves apart without heating the glue, would it not be a good idea to heat the glue after re-assembly to make it settle back to its original bonding position/strength and perhaps re-tighten the screws a bit as it settles? -- It just seems a little too easy! ;-]
Hello! :) Thank you for taking the time out to teach us all! haha We have a question for you! What temperature on the heat gun and solder iron? Also, what's the air flow number on the heat gun?
Why? If the mic was installed by hot air, then it can take it directly for a time... why protect it from a possible minor side blast now? It will not de-solder unless the heat is sustained. And he's using a very narrow nozzle and keeping it in constant motion to avoid that. So, unless you sell capton tape for a living, I don't see a problem. ;-]
Micro soldering is so sensitive- I’m not sure I could pull this through. Chargie USB stick is a sure solution as it removes charge port risk and prolongs battery life.
I've seen people doing similar job but using the air station instead. They'd put the new solder in, then put the replace part on top, and then use the air station to melt the solder and fixate the part. Do you think that method would work on this?
@@iSmart1 I see.. That's a fair point. But I'm pretty bad with the iron, so I'm scared to damage the motherboard with it. What if I protect the insides with foiled tape? Would that protect it?
i am only able to get one open, i think it could be the Solder flux that is not opening up holes easily. I have the same Solder wic and Solder gun gets very hot
This is a fantastic video, Thanks. I've been needing a new phone, as my Galaxy-Prime is out of date now (over seven years old), and this video has convinced me to bite the bullet and get a new phone. I'm pretty handy with repairs, but this looks like it would be pretty difficult for me to do. Thanks again for such a good tutorial.
Straight forward instructions for soldering a new charging port. Thank you for keeping it simple and pointing out the difficult part on soldering the micro pins to mother board.
Very great explanation and nice video
Very clear sound and nice explanation
Mobie phone good rimoe and good installetion charging jack super
Oh I love it,nicely English I understood.show me next time how to program cellphones.thank you.
Nice video
You have explained it beautifully bro.. Thanks!!
Thank you so much sir for giving us all the knowledge for repairing charging pin.
Especially like me im just new in phone repair. I reall want to be a good in androin phone repair. By the way. Its june 5 2020
Watching from philippines.
A very simple and clear explanation. Thanks bro👍
I wish this had shown instead of some other videos. You explain why to do something and technique that others dont show or talk about. I replaced the screen on my j7 and now it won't turn on. It also has a charging port problem. I will look and see if you have videos about that but I wanted to say best video I have seen on the subject. Nobody else talked about the little prongs or the little wires. The just did the 4 big ones and that was it. Thanks again.
Really good I need more your videos
a very easy to follow guide. Brilliant, clear explanations. Thank you very much Sir!
Pls can u add heat to allow the gum melt and be firm again
I do like what I see and hear. Definitely well explained which will
make my work much easier. Great video!
GREAT EXPLANATION AND SHOW..THANKS
Great explaination sir
Nise
Salute to the person who struggle evryday to grow
Super nice sir
Excelent cideo. Very informative with great visual showing and verbal explanation. I have a Samsung Galaxy Core Prime that has a charging port that needs to be replace, which as the charging port on my phone and the phone you used are the same, this video will help me in replacing mine.
BARAKA ALLAHO FIK
Good job
Thanx bro.. u did a great job. that was a very clear explanation 👍
nice nice video
Muy bueno la enseñanza, un saludo desde Peru.
Nice teaching bro
Great sir
عمل جد متقن و دقيق شكرا لك
Very nice sir
Damn this guy is the best. Subscribed ALL (9.84K Subscribers as of now - 1/29/2020 @ 11:57PM PST)
Nice ripeing
wow..your the best in phone repair demonstration :D I learned a lot. Wish to see more videos from u...Thank you. God Bless u :D
Thanks for sharing..Good job 👍
Perfect guide.
Thanku so much.
thank you very much its good explanation
excellent video
Great video nice and neat, thank you once again.
Super
you real smart Good idia
I hope this was like ... the best tutorial.
amazing video
Thanks alot
wow so nice
Nice video!
Novice question: After having essentially ripped the two halves apart without heating the glue, would it not be a good idea to heat the glue after re-assembly to make it settle back to its original bonding position/strength and perhaps re-tighten the screws a bit as it settles? -- It just seems a little too easy! ;-]
Hello! :) Thank you for taking the time out to teach us all! haha
We have a question for you!
What temperature on the heat gun and solder iron?
Also, what's the air flow number on the heat gun?
It depends on what heath gun are you using. I putted nine on the highest. Make sure you are not burning your motherboard.
Sir super
m3allam
Keep doing great!
Wow
Wonderful demo! Thank you Sir
EXCELLENT VIDEO
Great lecture, thanks
thanks bro
دمت گرم
mast video
Great video what heat gun would you recommend
Rework Soldering station 862D+
Good work but sorry you should protect the mic from the hot air first!!
Why? If the mic was installed by hot air, then it can take it directly for a time... why protect it from a possible minor side blast now? It will not de-solder unless the heat is sustained. And he's using a very narrow nozzle and keeping it in constant motion to avoid that. So, unless you sell capton tape for a living, I don't see a problem. ;-]
Thank u for the tutorial 👍
We need:
This solder
The desolder
And dis holder
lol And it you screwed it up, and it was your girlfriend's phone, the only thing you can do after this is hold her. ;-]
so nice
Thanks a lot.
Nice. What temperature on heat gun. And solder iron.?
Approximately how much can I spend on those equipment. I already have soldering iron by the way. I'm based in South Africa
Around $100 with the soldering station.
Thank you
super
thanks
thank you
Thanks
Good jab
What is the name of the 2 device you put on the charger port before you heat it with sodeing iron..
Micro soldering is so sensitive- I’m not sure I could pull this through. Chargie USB stick is a sure solution as it removes charge port risk and prolongs battery life.
I've seen people doing similar job but using the air station instead. They'd put the new solder in, then put the replace part on top, and then use the air station to melt the solder and fixate the part. Do you think that method would work on this?
yes, it's possible just the air station will melt the plastic inside the charging port that's why I prefer to do it manually.
@@iSmart1 I see.. That's a fair point. But I'm pretty bad with the iron, so I'm scared to damage the motherboard with it. What if I protect the insides with foiled tape? Would that protect it?
Hi sir what do you called that charging port so i can order on amazon,i have same problem on my phone.i hope you can answer and help me.thanks
can i use liquid tin on the charging port pins to solder them?
Hi! How hot must the soldering iron be? Thanks :)
Hey please help me, what the perfect temp to use
i am only able to get one open, i think it could be the Solder flux that is not opening up holes easily. I have the same Solder wic and Solder gun gets very hot
Apply the flux first and add mor solder then remove it with the solder wick
I still do not understand
What kind of Solder flux are you using? Brand?
why my techno povior 3 air have slow charging nowadays and charging light deem deem, what could be the solution
what temp on the air gun did you used?
Have u ever try change 'type b' for 'type c'?
No
How Can get fer solder plz
How to disassemble ICE in android phone
Is it possible to remove the old port without a heat gun but using a 450°C soldering gun?
same question i have. I would think the heat gun would ruin other parts.
It's possible but I don't recommend it at all
Sir i am technition sir
Charging jaha hota hai baha print hi Nahi hai to Kya kare
is my phone's charging port broken if I can still charge but cant connect to computer or transfer files?
I ripped the bottom half of the motherboard off from.the top part is this fixable
هل هذا آمن للهاتف و أقدر أعمله لوحدي في أقدر أعمل كل دا في المنزل؟
Do you have part number for USB port?
sorry, no.
you can just search it on eBay
charging port for Samsung + the model number of your phone
Do you have an email to contact you thanks
If charging port changing doesnt work....what is to be done...please
If the pins on the changing port not soldered 100% perfectly it will not charge, you need to be 100% precise.
y
What this full name alcohol
Any alcohol 90° or up will work.
how much cost to change port for grand prime i have problem with my port
The part itself is cheap but a technician will charge around $40
And what kind of charging port is compatible for samsung galaxy grand prime to order on amazon?thanks.
How to remove port without heat gun?
It's possible but not easy
hey, wash maghribi
صحيح
great, I just guessed that from the accent, great English though I like it keep up the good work,
Hi i have same problem on my samsung galaxy grand prime,the charging port.but how can i order what is the name of the port.what it is called?
Just search for it on www.ebay.com
Charging port for Samsung galaxy grand prime
Poda kirukku
Nice video
Thank you