Harco HE-NC8 8 stage Electric Kiln Controller Instruction Video
Вставка
- Опубліковано 24 кві 2013
- This unit can be programmed and this video will show you how to do just that. I go through the programming steps as an example.
The key knowledge is a) Hit Enter when you reset anything and b) when entering the same temperature as a previous step the rate/time button automatically knows you want to then set a soak time in minutes.
The unit can store and remember 8 programs, under numbers 1 - 8. To use a program you have stored just select the number you saved it under by using the up down buttons, then hold down the Enter button until you hear a second 'beep', then release the Enter button. The program will then quickly review the program steps and turn on the kiln automatically.
Thanks very much for posting this. You have given the confidence to change the settings on my preprogramed Harco controller. I found the instruction booklet confusing. :-) Cheers Loretta
Thanks heaps! ;)
Hi. I don't know if you will receive my request (plea) I use earthenware clay. I'm having trouble programming the glaze fire. I would so appreciate it if you could give me instructions on which program to use a d how to get it going.
Hi, what program do I set controller to if I want to do a bisque to 1000 degrees Celsius. I've used 005, but should I have used 003?
HI, would you be able to help me create a program just for lustres with the Harco?
Hi. Sorry, I don't know the firing sequence required for lustres. Hope when you find it you can program the unit successfully using my video. Cheers. Marcus