Adding Custom Logo on PCB | Add Logo under 5 minutes | KiCAD Beginners
Вставка
- Опубліковано 17 чер 2022
- In this video, we show you how How to put your own logo on your PCB using KiCad.
#learn #kicad #make #pcb #pcbdesign
This video will explain how to take your logo from BMP or JPEG and put it on your silkscreen on your PCB.
If you would like to learn more about PCBs leave comments on what you would like to learn and we will try and help.
This section will show you how to add your own local custom 3D Symbol so that you can use them and connect them to schematic components using PCB Editor. We're going to assume you've already been through the previous sections of this tutorial; you should have KiCad downloaded and installed.
Reference 3D Models: grabcad.com/library/e73-2g4m0...
Project File: drive.google.com/file/d/1xiAi...
You can also refer following videos for KiCAD: • KiCAD Tutorials
1. Adding a new symbol to the library: • Adding a new symbol to...
2. Adding a new Footprint to the Library: • Adding a new Footprint...
3. Adding a new BGA Footprint to the Library: • Adding a new BGA Footp...
4. 3D Model | Kicad Adding a new 3D Model to the Footprint: • 3D Model | Kicad Addin...
My channel publishes videos that focus on Electronics/Electrical Concepts. If that sounds like it could be helpful for you, please join me...!
#electronicsandcommunicationengineering #pcbdesign #pcb #altium #altiumdesigner #printedcircuitboard #orcad #pcbdesigner #pcbdesigning #arduino #allegro #eda #pads #cadence #ecadstar #zuken #xpedition #ecad #pcad #pulsonix #deltadesign #microcontroller #highspeed #hs #engineering #soldering #atmega #circuit #prototyping#pcbdesignengineer #pcbengineer #hardwaredevelopment #microchip #electricalengineering #arduinoproject #pcbengineering #eaglepcb #autodeskeagle #hardwaredesign #development #layoutdesigner #layoutengineer #technology #multilayerpcb #d #p #proteus #eagle #atmel #easyeda #autocad #diptrace #armcortex #electricity #sketchupfree #blender #dmax #electronicsworkbench #programming
Thank you so much for this! I was a bit stuck on a project and this really helped me
Excellent Kicad logo information. 😎 Thank you.
Thank you bro!
thank you for the tutorial, might take a military guy but it reminds me of the 82nd Airborne logo :)
Cheers mate, that was useful
Yup, it is. Thank you for the response.
Thank you for explaining all of that. You made it all make perfect sense -- i even managed to put a logo on one of my boards.
Fantastic!
thank you brother.
Does the logo comes out made out of copper when you get the PCB from the manufacturer? that's what I'm looking to make, the logo made with copper on the PCB.
Yes, it is possible. If you want then I can make a small tutorial on the same.
Can anyone tell me why the size of my image is shown in the Bitmap to Component Convertor but there is no way of changing it !
I don't have the size dialogue box shown in this video.
I also don't have the Export to Clipboard option only Load Bitmap and Export !
Anyone any suggestions ?
Please uncheck the tick mark in the Output Size menu (Remove tick mark from Lock height / width ratio).
Sometimes this happens when you upload directly, the simple solution is just open the image in the microsoft paint and save it after that try to load into the Image converter. It shall work.
@@AmazingAutomation Thanks. I was on an older version of KiCAD. I upgraded to the latest version but the KiCAD Bitmap convertor tool was still a bit hit and miss. I moved to Paint and had to reduce my logo by a factor of 8 in both the x and y plane. As a png it seemed to reduce OK in Paint with all the detail present but when I went to bring it on to the PCB the detail was not reproduced - the image and the words making up the logo were both distorted.
It is a bit disappointing as right now I do not have any particular idea as to the reason !