Scenic 2004 KONE MonoSpace MRL traction elevators @ Rådhuset (Town Hall), Tromsø, Norway
Вставка
- Опубліковано 20 жов 2024
- Tromsø Rådhus (Town Hall)
• Location: Grønnegata 94. Tromsø, Norway
• Manufacturer: KONE
• Year: 2004
• Serial: H 381036, H 381037
• Type: MRL traction
• Capacity: 13 persons or 1000 kg
• Stops: 8
Recorded 2012
I really love the sound of those ecodisc motors
Even though the button -1 and -2 don't work, it still goes to those floors, you need a keycard to press them because they are sevice floors, you saw that things were getting on and off twice. This is why -1 and 2 are locked.
Great effort in making these
@halidmahalbasic Code/ID-card reader is for access to -1 & -2
Awesome elevators!
Check it carefully and rather omit if you cant do it. The engine that is embedded in so called 'KONE EcoDisc' is extremely loud during lift start-of-run phase. The drive generates high volume very low-frequency sound at highest floors that is not possible to be suppressed by simple foam or so. Really check it, especially for empty lift starting to go down. Maybe newest designs with isolated pit are slightly better.
This is an excellent demonstration of why you don't use passenger elevators for moving freight.
机器维护的不错,噪声小环境干净。
Awersome elevator in the world??'really good
@DutchElevatorChannel Yeah. But at least that gave me a ride to -2
KONE
dedicated to people flow
3:03 Use the goods lift!
Yea you could ruin the design of these. If something is to small to fit in them you should use a different lift
Drifting Sofa
That's not how lifts work.
Kone the best
@halidmahalbasic yes
Z 1jjjjjnjji
wozu ist der codeeingabegerät im rechten aufzug gedacht?
Is yhis a linear motor ?
Nice 👍🏽
ZA PRAVILNO DELOVANJE FREKVENČNEGA REGULATORJA JE TUDI VAŽNA PROPORCIJA TEŽE KABINE TER TEŽE PROTIVUTEŽI..............;)))))
,,
Yess,,,,,,,and parameters ,,,,,and good checking,,,,,,;)
You what?
Natalija Cecelja гккнкпнеееееекуккрд
السلام رؤ
i have not seen counter weight as crooked as them in years. wtf who put them like that. or maybee it racked going on safety if there was space below weights.
the speed governor is not well-placed, it should be turned upside-down and the fillings of the counterweight are not horizontally placed @ 00:22 u can see that they are inclined :)
it doesn't mater up or down .. the important one is correct direction that will govern over-speed.. alignment of counterweight is not important if it isn't change centers of gravity in total.. in this situation its only bad looking that's it.. But brakes too noisy must adjusted. also induction sound loud, need some "fine adjustment" in 6-50`s parameter as torque and acceleration... but Kone always rock.. they make wonderful machine and control systems.. except V3F16 drive system :P
My school has Dover Impulses
those buttons are disabled.
But if you still really want to go there, you need a keycard, with out it, no can do.
KSS 520 fixtures.
ElevatorsinRussia The only 500 series of KSS you can get in Europe ;)
Town hall offices
Heritage Elevators to
D
Heritage Elevators the
KSS500
moonage elevators Nope KSS 520
moonage elevators Out of the 500 series of KSS you can only get 520 in Europe
вау!
ponosen da sem prvi v SLOVENIJI z Tomažem ŽIBERTOM ZMONTIRAL TAKŠNO DVIGALO TO MI SODIŠČA NE MOREJO VZETI TO KAJ GLEDATE PA SO MALE TEŽAVE ZA SERVISERJA ;)
der rechte aufzug fährt nur von 0 bis 5
Da cuje se kocnica ali je regulator dobro postavljen.
Dragan Miletic 5ty
Dragan Miletic atf-q1123344t5t56677 901991000101wshi8.
Lol 4:03
я українець
stop spamming
Too bad! It can't run
What do you mean? They are running
I hate the annoying sound of these motors.
that's the best part!
Exactly! The sound is so "clean" and "new" in a way. I love it!
I don’t agree with you AT all