Good video thanks! I would say disconnect battery first before even unplugging screen plugs. This is to ensure no short circuit can occur. Also be very careful suing metal tweezers around the microphone
I replaced charging port and battery. I heated phone by placing a cloth on a frypan and heating over low heat. I would recommend using good quality tools, rather than the cheap ones, (I used), included with the replacement parts. Keep track of the screws; they are tiny and all different. Overall the repair was a success but Face ID doesn't work anymore.
Hi, can we test the new flex just by connecting in the board and without actually removing the original flex? So we know the problem is with the old flex!
Yes you can, simply disconnect the charging port cable and battery connector cable, Then connect the new charging cable and the battery plug. Connect the charger and test your new flex. check the video below, this is on XS Max ua-cam.com/video/2jUImg1652o/v-deo.html
How did you remove the screw near the one sim tray at 3:28 its not a philips head and you removed it with a philips???? Im also looking at it right now and its NOT A PHILIP SCREW ITS JUST A CIRCLE HEAD!!!!!!!
![iPhone XR - Lightning connector replacement [including reassembly]](http://i.ytimg.com/vi/TRN2RSa7Sns/mqdefault.jpg)
![iPhone XR – Lightning connector replacement [including reassembly]](/img/tr.png)
Bruh im a repair tech and this video was PERFECT. straight to the point. Liked and subscribed. Thank you! o7
Thanks for the support
Good video thanks! I would say disconnect battery first before even unplugging screen plugs. This is to ensure no short circuit can occur. Also be very careful suing metal tweezers around the microphone
Face id still works if i performed this sir?
Yes
you changed thecharger, not your face, why would the face id not work? im not understanding your thought process on that question whatsoever
Someone in the comments said face id is not working after replacing it@@CodyKlimaszewski
What screw driver did you use for the motherboard
Ty everything was fine!
Great 👍
Very good clear instructions ☺
Glad you liked it
I replaced charging port and battery. I heated phone by placing a cloth on a frypan and heating over low heat. I would recommend using good quality tools, rather than the cheap ones, (I used), included with the replacement parts. Keep track of the screws; they are tiny and all different. Overall the repair was a success but Face ID doesn't work anymore.
Whyy
Face id what happened?
thanks for this brother love and respect
My pleasure!
Hi, can we test the new flex just by connecting in the board and without actually removing the original flex? So we know the problem is with the old flex!
Yes you can, simply disconnect the charging port cable and battery connector cable, Then connect the new charging cable and the battery plug. Connect the charger and test your new flex. check the video below, this is on XS Max ua-cam.com/video/2jUImg1652o/v-deo.html
@@DIYGeardo thank you. That really helped
Thank you Sir
Most welcome
Is it vibration ribbon too?
Sorry, what do you mean?
@@DIYGeardo in this ribbon vibration port also attached?
how much it cost
The part is about $20-30
can a iphone 11 spare phone charger port be used for an iphone xr?
not compatible
Thanks 🙏
You’re welcome 😊
How did you remove the screw near the one sim tray at 3:28 its not a philips head and you removed it with a philips???? Im also looking at it right now and its NOT A PHILIP SCREW ITS JUST A CIRCLE HEAD!!!!!!!
Did you resolve this? Lol
I’m also stuck with this lol