HSD F-16 Power Upgrade!

Поділитися
Вставка
  • Опубліковано 27 сер 2024
  • HSD F-16 V2 Power Upgrade:
    EDF: JetFan 110mm + Hacker 780Kv motor
    ESC: Hobbywing 160A, timing 5°
    Batteries: 2x HRB 6s 6000Mah
    Works great, flies great!

КОМЕНТАРІ • 19

  • @FlyRC
    @FlyRC 2 роки тому +4

    Good information thanks. Based on what I saw at the field and to remain on 12s, this is the setup I'll go for. I'll likely go with an HET motor. Possibly their 700-98-840.

  • @RCPlaneReviewer
    @RCPlaneReviewer Рік тому +1

    love to see a video of it flying!

  • @johnpryor1318
    @johnpryor1318 2 роки тому +1

    I cut some foam out and stuffed a 127mm dynamax with a HET 700 in my f16. Now it can go vertical from brake release . Power is impressive, the airframe needs some wing re enforcing. Mine is a V1/2 and at high speed the ailerons stop working from the wings twisting and it does an uncontrolled roll. Only thing you can do is cut the power and opposites rudder and a gentle pull to bring the speed back down.

  • @garys3418
    @garys3418 2 роки тому +1

    I recently used a Leppard motor for a high-powered setup. You might consider it as an alternate for the hacker

  • @FlyRC
    @FlyRC 2 роки тому

    Niiiiice, I'm going with the 110 with the HET. The 840 sounds tempting but I may just stay with their 780. I don't want the foam ripping apart. Lol. Based on what I saw with yours at the field, it was very close to the performance I had when I tried my 14s experiment.

  • @mpojr
    @mpojr Рік тому

    if hacker motors ar badly designed why do you use them ?is there something else that you can use?

  • @frank-vq4mx
    @frank-vq4mx Рік тому

    If these motors are prone to overheating. Than why would you risk the F-16 on a power system that "you" know may burn up ??

  • @rogerspencer5532
    @rogerspencer5532 Рік тому

    Met you at Thunderbird field today. I'm trying to get the back off the ESC. Any pictures or help appreciated. I took out the 4 screws in front, but can't get it to separate.

    • @pzukowski1001
      @pzukowski1001  Рік тому

      Hi Roger. Not sure what it could be. It may be glued together, maybe try gently prying it open?

    • @rogerspencer5532
      @rogerspencer5532 Рік тому +1

      @@pzukowski1001 Black silicone I think. Got it apart, but they put that same silicone over those ports you soldered. Must have seen your video. HaHa

  • @garys3418
    @garys3418 2 роки тому

    Nice!

  • @germocane7025
    @germocane7025 Рік тому

    Hi sir great job
    I'm trying to do the same on my hsd super viper
    would appreciate very much if you tell if you installed the jetfan without the intake leap and in that case if did not loose power without it
    Thank you very much in advance
    Best regards
    Wish I get the same results LOL!!!!!!

    • @pzukowski1001
      @pzukowski1001  Рік тому +1

      Hi no I did not use the intake lip. The foam in the F-16 provides a similar effect as it is shaped a bit like an intake lip. There is plenty of power wit this setup

    • @germocane7025
      @germocane7025 Рік тому

      @@pzukowski1001 thank you very much again really appreicated

  • @mrt10352
    @mrt10352 2 роки тому

    How is the T-45 doing?

    • @pzukowski1001
      @pzukowski1001  2 роки тому

      It's being rebuilt

    • @mrt10352
      @mrt10352 2 роки тому

      @@pzukowski1001 Dang, did it crash?

  • @FlyRC
    @FlyRC 2 роки тому

    And the results are in ua-cam.com/video/H_t_t1s5HwI/v-deo.html

  • @sotm2
    @sotm2 2 роки тому

    Switch to a HET motor!!