How to replace SEAT BELT Toyota Corolla, Camry, RAV4 Years 1991 to 2024

Поділитися
Вставка
  • Опубліковано 20 тра 2015
  • How to replace Toyota Corolla front seat belt. Years 1991 to 2024
    Corolla, Camry, RAV4, YARIS, AVALON, etc
  • Авто та транспорт

КОМЕНТАРІ • 78

  • @michaelho274
    @michaelho274 Рік тому +3

    My 2004 Toyota Corolla has same problem the belt webbing burn out. I have ordered the belt webbing on Amazon. I am going to replace the webbing instead of replacing the whole unit. Your video has great help to demonstrate to remove the whole unit. I have to figure out how to replace belt webbing only.

  • @2bleubird
    @2bleubird Рік тому +1

    Thank you Peter! I finally got around to replacing my seat belt that keeps locking up and I needed a guide for taking the old belt out!

  • @rickytes
    @rickytes 8 років тому +7

    Thanks for this video! My seatbelt was in the locked position and wouldn't come out. Found this video and just removing the panel somehow unlocked it and it's working again. Thanks!

  • @joycevell3210
    @joycevell3210 6 років тому +1

    Excellent teacher!! One of my favorites!

  • @TheWeteyezz
    @TheWeteyezz 7 років тому +1

    Thank you for posting this. You make it look so easy :)

  • @therealspixycat
    @therealspixycat 4 роки тому

    Thanks for the video. I have to renew my seatbelt for mot. Very handy to know what the angle of a track is. Thanks a lot Peter!!

  • @bairyhalls3453
    @bairyhalls3453 8 років тому

    Great video! I'm about to do this on my 98 Toyota 4Runner. If you ever get a 4Runner in the shop please make video!

  • @michelleantkowiak5134
    @michelleantkowiak5134 7 років тому +2

    Thank you for this video! I spent time today trying to remove the seatbelt and had to give up. You have given me insight on how to get to the bolts at the top of the belt so I will get it done tomorrow!!

  • @kolayotadventures6789
    @kolayotadventures6789 2 роки тому +1

    Thanks for video, it was a great help, I replaced the belt on my daughter’s car and thanks to video it was so easy 👍🏻

  • @jamesday2651
    @jamesday2651 Рік тому

    Excellent video, very concise and clear. Would be great to see how to install the rear seat belts. Having trouble finding a video for this. Great Job again!

  • @genericusername1365
    @genericusername1365 7 років тому +1

    Thank you Peter.

  • @billymcenr6565
    @billymcenr6565 5 років тому

    Great video; very instructive.

  • @b0kb0k
    @b0kb0k 7 років тому

    Thanks for sharing. Well done instructional video.

  • @navruzikhurosoni4606
    @navruzikhurosoni4606 7 років тому

    Thank you for showing us.

  • @urpolaatikainen7969
    @urpolaatikainen7969 2 роки тому

    Great video tutorial, now I know how to change the front seat belt of my wife's daughter's dog-eaten car

  • @micromaster9629
    @micromaster9629 9 років тому +1

    Thanks Peter.Liked.

  • @attractacronin22
    @attractacronin22 4 роки тому

    Very good and thank you

  • @angelaraujo3785
    @angelaraujo3785 6 місяців тому

    Thank you so much brother!

  • @gregpowers4208
    @gregpowers4208 16 днів тому

    Thanks Peter!

  • @Hurricanelad
    @Hurricanelad 5 років тому

    Thank you Peter

  • @Lennon766
    @Lennon766 9 років тому

    Well done. Thanx

  • @rideronthestorm_
    @rideronthestorm_ 6 років тому +1

    To swap out drivers side seat belt latch, do i need to disable the airbag system or anything like that??

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  6 років тому +3

      Yes, please take battery cables away and wait 30 min. Electricity goes away within 30 min.

  • @toriless
    @toriless 8 років тому

    If you are doing this to a similar Chevrolet Prizm you should actually remove the runner guard from the drivers door first since it has pegs one each end that go into holes in the side pieces to stop them from pulling apart. It is secured on end closest to the drivers wheel. You can then pull of the panel as shown, except without breaking part of the lower corner. I use a screw driver to start it and the bent the drivers side as shown using my hands. To remove the upper retainers cover it works best to use a screwdriver from the side since you can get a direct angle into the piece and not insert it at an angle. The lower rubber cover remove best but pulling it down, as shown, and the pulling the backside lip outward and then you can slide it up enough to be out of the way. You do NOT need to all the pulling apart to get the hook off. Just insert a screwdriver between the retainer and the car frame and it will easily pop out, the carpet has plenty of give without pulling on it first.
    If you belt is just slow retracting and not beaten up as shown and you have gunk on the retracter you should first try cleaning it before spending money replacing the belt. If it is failing to engage just replace it. They only cost $100+ each (front versions). That automatic torsion wrench alone probably cost that much (or more).

  • @jayden8206
    @jayden8206 5 років тому

    I have a 94 corolla is the seat belt mechanism gonna be the same? I cannot check

  • @sukahatilanun2881
    @sukahatilanun2881 2 роки тому

    Love u fin.... your my Corolla idol

  • @tomwilsenham894
    @tomwilsenham894 6 років тому

    Hi Peter. A demonstration for the rear passenger seats would be great. It's harder to get to. Thanks in advance if you are able to do one.

  • @eduardwilliams1245
    @eduardwilliams1245 4 місяці тому

    Thank you.

  • @lancesandford1628
    @lancesandford1628 Рік тому

    Thanks for the video.
    What were the specs for the torque wrench again?
    It was 70 something but I couldn't make out what you said.

  • @rocykel
    @rocykel Місяць тому

    A previous owner has used so much perfume that the seatbelt on the driver side makes your clothes stink. I've tried to wash it with many different things, but nothing works. The stench is horrible. Can I just get the seatbelt from the passenger side and move it to the driver side? And have the stinky seatbelt on the passenger side (I almost never have passengers). Are the two parts the same, so they fit either side? Mine is a 2005 Corolla hatchback.

  • @Chaseaction-outdoor-activities
    @Chaseaction-outdoor-activities 5 років тому

    thank you

  • @charlescamarillo90
    @charlescamarillo90 6 років тому

    I have a 2001 Toyota Corolla and I need to replace front passenger seat belt. But my seat belt has a metal cyender and os connection to a yellow plug that I can't take off. And the used seat belt I bought on eBay. They just cut it off. Do I just cut mine off ? Or do u know what that yellow cord does?

  • @doubtingmean698
    @doubtingmean698 2 роки тому

    Oof, didn't think it was gonna be this easy, but then again it is a corolla🤣 (and also the way he does his videos make it way easier to understand stuff compared to some others)

  • @michaelrepman4724
    @michaelrepman4724 5 років тому +1

    I gotta 96 Corolla dx. My seat belt doesn't retract at all. I'm trying to source a replacement... is my only option going to the dealer?

  • @benmphanjechikaonda5185
    @benmphanjechikaonda5185 8 років тому

    My toyota corolla is right hand drive. Can I replace front seat belts with those from a left hand drive corolla. Same models but just different drive side. Please advise

  • @hungsingkwoonusa650
    @hungsingkwoonusa650 2 роки тому

    question: can you use the seat belt of a 97 corolla with a 96 corolla seatbelt?

  • @thomotho
    @thomotho 7 років тому +1

    Nice video! Where did you buy the seatbelt please?

  • @mannya1282
    @mannya1282 3 місяці тому

    Hello I’m looking for the specific torque specs for the bolts

  • @alexmorazan12
    @alexmorazan12 8 років тому

    what is the plastic thing u took out first called

  • @jamescc2010
    @jamescc2010 7 років тому

    Unfortunately I damaged my plastic connector at pre-tensioner on my 2005 Hyundai Elantra. I will need to replace the whole wiring. Anyone done that before?

  • @fredjones1238
    @fredjones1238 4 роки тому

    so painful