The original blade was on upside down. And yes it's very good to take the spark plug wire off the plug before u mess with the blade. And those blades are both universal blades that's why all the adapters. When ever u lay your mower on its side always oill fill tube down closer to the ground Air filter up or oil will get everywhere it shouldn't. Love your guys videos keep up the great work 😊
Oh Wow I need Larry here in NY or I'll need to move to NJ lol What a talent you have Larry, you know about a lot of mechanical stuff , but then your a country boy and y'all know a lot of stuff like that. Great job to the both of you
It’s all about who’s taught them or what he’s seen over the years like roofing hell u can’t just look it up online because it’s not giving u your actual code for placement I remember the video when he told Jessie he was doing his roof I’m like yeah he’s had to of done roofing or been a labor at onetime and seen how they installed them that’s what I’ve done now landscaping I’ve picked it by my self over the years simple mistake people make with zero turns is they don’t make 3 point turns they make a full 180 or they make 1 point turns and rut it up that’s only meant for lawn mowers that have four wheeler type tires cause there really meant for ditches and 180 turns don’t ask how it works. I just have them on my mower and I make full 180 turns and even when it’s wet sometimes I still don’t rut it takes practice over time but
When he flipped it upside down. The oil loaded up the cylinder and hydro locked the engine.And filled the muffler up with oil. Thats why it was hard to pull at first. Then the valves opened letting a little oil out just enough to get some fuel it in and shot some oil out the exhaust to release the pressure to make it pop off. More than likly joe ran over a Branch or something hard and sheered off the keyed washer.
if the push mower Blade bearing is bad rusted on it wont turn when you try to pull the rope to start it, if its just a bad bearing than you will be able to hear it making a sound, main reason old engines dont start after you check the gas and oil is because the spark plugs are dirty or bad or the engine is seize up the pistons are welded together because of no oil to lubricate the engine because pistons cause friction if no oil they weld each other together and blow up the engine.
3 things to start a engine Fule oxygen and spark most of the time its bad spark plugs or not enough fule is getting into tyhe carberator so all you do is puch 3 to 5 times on the primer bulb.
Well you flipped it so take the spark plug out and pull it a bunch of times and the excess oil will pop out nd then put the plug back in and start it it will smoke a lot but let it run it will stop smoking
The Craftsman replacement blade will have that star pattern already stamped out of it and that’s the only blade you should be using from that crank spindle on that mower anything else will be unsafe. You can go to your local mom and pop shop or Home Depot/Lowes should have them. Also I like to fold handle down by where it connects to mower and flip mower up on its back wheels when working on the blade and even for cleaning under it. Just balance it till it stays or have someone hold for you usually it will stay. Hope this helps you. 👍👍
Whenever your hands are going near the blade always disconnect the spark plug wire. This will make sure it will not accidentally start. Plus we know Joe knows where that is now 😂.
LOL It's almost as bad as Larry using a hydraulic jack on his gravel driveway - that in one video was visibly tilting while Larry was UNDER Joe's car. 😬🙄
@@STAYWOKE000I uhhh.. I don't think he plays stupid like Tom does. Tom does play stupid. But, Joe... Joe just has loose screws on his chainsaws, lawnmowers, cars, and head, lmao.
LOL🤣🤣guys the air filter is to let air into the engine and it cleans the air too it wont start if its that dirty cake with dirt lol, make sure he buys a new one it better to buy it new. also check spark plugs oil and gas if it still wont start than its somthing interner inside the engine in that case just buy a new lawn mower.
@scottmurphyuncensoredoflaw906 is right. You need to soak your air filter in gas. It will loosen all that gunky crap and make it shiny new looking. I used to hang out with my brother-in-law and he was always feeding me all his mechanical wisdom.😂
Looks like joe needs a whole new blade adapter which is why that piece of pipe coming from the crankshaft spining and the blade spun freely its basically a sleeve that goes on. Always when you turn a mower on its side i always piont the fiter up had a flathead briggs and stratton motor i done the same. At this point it wouldn't hurt to teach him how to clean out his carb on his mower.
The pulley on the cramkshaft were the belts goes there is supposed to be a star patten for the blade to fit inside i just fixed a mower 3 weeks ago with the same issue part number 421782 for the assembly
it has the wrong blade on it that’s why it’s loose. should be a star pattern like the blade adapter. someone must’ve put on a “universal” generic blade at some point
I know I'm not the best of mowers but I was watching a video and was just like please check the spark plug I probably would have cleaned it and if it needed it I probably would have took some sandpaper to it Bud effort sets up right for a few hours you should be fine
So this for a future tip for Joe u guys could tell him if he put a block of wood or even concrete block by the shoot and let blades rest down on it when it moves it will only hit the block which will give u more force to get it tight or loose I’m not criticizing Joe for not knowing at one time I didint know I just don’t want Joe to not know how to do these thing when Larry or Tom isint around around
You do realize they film multiple videos through out the same day. They also film week in advance. He wasn’t taught this stuff when he was younger. Nothing wrong with learning new things at ANY age.
It sounds like the carburetor needs to be adjusted.. It's starts but won't stay running is telling me that it the carburetor needs to be adjusted. It would probably only need adjusted just a tiny bit and it should be fine.
Trying real hard not to trash F.J. But how is he not the most selfish, inconsiderate, overly obnoxious “friend”. I don’t get it. Sorry for despising that man child, I’ll pray for more understanding so I can tolerate this. The videos are great, the large gremlin just irks me
Love watching. Much love from Indiana 🤍
The original blade was on upside down. And yes it's very good to take the spark plug wire off the plug before u mess with the blade. And those blades are both universal blades that's why all the adapters. When ever u lay your mower on its side always oill fill tube down closer to the ground Air filter up or oil will get everywhere it shouldn't. Love your guys videos keep up the great work 😊
Hey Guys! Is the whole summer fixing Joe's equipment? What a good friend you are Larry! ❤️ You guys. Have a great day!
Need a good lock washer I think.
Oh Wow I need Larry here in NY or I'll need to move to NJ lol What a talent you have Larry, you know about a lot of mechanical stuff , but then your a country boy and y'all know a lot of stuff like that. Great job to the both of you
It’s all about who’s taught them or what he’s seen over the years like roofing hell u can’t just look it up online because it’s not giving u your actual code for placement I remember the video when he told Jessie he was doing his roof I’m like yeah he’s had to of done roofing or been a labor at onetime and seen how they installed them that’s what I’ve done now landscaping I’ve picked it by my self over the years simple mistake people make with zero turns is they don’t make 3 point turns they make a full 180 or they make 1 point turns and rut it up that’s only meant for lawn mowers that have four wheeler type tires cause there really meant for ditches and 180 turns don’t ask how it works. I just have them on my mower and I make full 180 turns and even when it’s wet sometimes I still don’t rut it takes practice over time but
When he flipped it upside down. The oil loaded up the cylinder and hydro locked the engine.And filled the muffler up with oil. Thats why it was hard to pull at first. Then the valves opened letting a little oil out just enough to get some fuel it in and shot some oil out the exhaust to release the pressure to make it pop off. More than likly joe ran over a Branch or something hard and sheered off the keyed washer.
if the push mower Blade bearing is bad rusted on it wont turn when you try to pull the rope to start it, if its just a bad bearing than you will be able to hear it making a sound, main reason old engines dont start after you check the gas and oil is because the spark plugs are dirty or bad or the engine is seize up the pistons are welded together because of no oil to lubricate the engine because pistons cause friction if no oil they weld each other together and blow up the engine.
3 things to start a engine Fule oxygen and spark most of the time its bad spark plugs or not enough fule is getting into tyhe carberator so all you do is puch 3 to 5 times on the primer bulb.
Before I even started the video I saw the title I said to myself “check the spark plug” 😂
Handy man uncle Larry. ❤❤❤love it .
Well you flipped it so take the spark plug out and pull it a bunch of times and the excess oil will pop out nd then put the plug back in and start it it will smoke a lot but let it run it will stop smoking
The Craftsman replacement blade will have that star pattern already stamped out of it and that’s the only blade you should be using from that crank spindle on that mower anything else will be unsafe. You can go to your local mom and pop shop or Home Depot/Lowes should have them. Also I like to fold handle down by where it connects to mower and flip mower up on its back wheels when working on the blade and even for cleaning under it. Just balance it till it stays or have someone hold for you usually it will stay. Hope this helps you. 👍👍
good job guys. Larry you are a good help.
Whenever your hands are going near the blade always disconnect the spark plug wire. This will make sure it will not accidentally start. Plus we know Joe knows where that is now 😂.
LOL It's almost as bad as Larry using a hydraulic jack on his gravel driveway - that in one video was visibly tilting while Larry was UNDER Joe's car. 😬🙄
I like watching these videos of 2 idiots fixing stuff 😂
Happy Tuesday Loungers! ❤ I love these videos they are the best thing to watch.
Use a block of wood to stop blades spinning
You don’t take care of your stuff Joe you’re a great friend, Larry
Let me come have a drink with y’all lol I love how yall have fun all the time! I’m from Kentucky
RIP Joes mower!
Joe needs a new mower! Come on Joe Money bags get a new mower! LOL!
You gotta duck tape it on there! LOL!
Damn Tom good license plate shot
Joes license has been in a lot of videos, you aren't gonna get any info from it lmao
They have all been in videos for years everyone knows where they live. There is legit nothing you can do with that info that benefits you
Blade on his lawnmower and his Chainsaw is loose lol
Joe plays stupid all the time so he don't got to do any labor just like Tom
@@STAYWOKE000I uhhh.. I don't think he plays stupid like Tom does.
Tom does play stupid. But, Joe... Joe just has loose screws on his chainsaws, lawnmowers, cars, and head, lmao.
@@OhioBoii330😂😂😂
@@Simplymike2024 Uhh... Huh?!? Lol
LOL🤣🤣guys the air filter is to let air into the engine and it cleans the air too it wont start if its that dirty cake with dirt lol, make sure he buys a new one it better to buy it new. also check spark plugs oil and gas if it still wont start than its somthing interner inside the engine in that case just buy a new lawn mower.
Joe needs a new mower
Well at least you got it running 😉 that's a good sign. Joe don't forget the air filter too 🥰 The thumbnail 😂😂❤
@scottmurphyuncensoredoflaw906 is right. You need to soak your air filter in gas. It will loosen all that gunky crap and make it shiny new looking. I used to hang out with my brother-in-law and he was always feeding me all his mechanical wisdom.😂
I think it's the air filter
Did you guys hear me? I was yelling at the tv screen, “Check the spark plug! Check the spark plug!” ⚡️
The key way Brock is why it's spinning like that
The mower guys she’s about locked up fellas
He probably ran over a big rock and broke something.
You can soak in old gas I had to fix my blade because it was loose and my mower was hard to start cause I had it on the side
Flip the mower so the air filter is facing up towards the sky. You do it the other way around oil comes through the pcv and soaks the air filter
Looks like joe needs a whole new blade adapter which is why that piece of pipe coming from the crankshaft spining and the blade spun freely its basically a sleeve that goes on. Always when you turn a mower on its side i always piont the fiter up had a flathead briggs and stratton motor i done the same. At this point it wouldn't hurt to teach him how to clean out his carb on his mower.
The pulley on the cramkshaft were the belts goes there is supposed to be a star patten for the blade to fit inside i just fixed a mower 3 weeks ago with the same issue part number 421782 for the assembly
Itran fine before i hit the rock and drained the oil.
i know jessie's dad probably was annoyed and laughing the whole time watching this😂😂 cause mr ridgeway knows alot about mowers
They give you new washers with the blade when you purchase the correct size for your mower, i just changed mine.
good video Larry
It’s burning oil with the white smoke let it sit a min it’ll turn over or put some ether in the carb
it has the wrong blade on it that’s why it’s loose. should be a star pattern like the blade adapter. someone must’ve put on a “universal” generic blade at some point
Joe . . . C'mon man. SMH 😆
You gotta take the carburetor off and clean it and put it back on
Hey there, Lounge TV.
Clean the Spark Plug
hi Joe
I love you Joe but man your like a child 😂
Happy Tuesday Loungers!
it might be hydro locked
I know I'm not the best of mowers but I was watching a video and was just like please check the spark plug I probably would have cleaned it and if it needed it I probably would have took some sandpaper to it Bud effort sets up right for a few hours you should be fine
hi Larry
At this point just get a new Everything!
Is Joe all there? He seems like he is a Happy Meal short the Toy
nvm the carb is gummed up with oil
Joe needs to clean or change that air filter probably isn’t helping 😊
So this for a future tip for Joe u guys could tell him if he put a block of wood or even concrete block by the shoot and let blades rest down on it when it moves it will only hit the block which will give u more force to get it tight or loose I’m not criticizing Joe for not knowing at one time I didint know I just don’t want Joe to not know how to do these thing when Larry or Tom isint around around
my grandpa used to put a little gas on the sparkplug
Happy Tuesday Everyone!
😂😂😂😂😂😂😅😅😅😅😅boy o boy Larry Joe handy man good 👍 brother rite there
Does Joe know how to do anything? What doesn’t he just move in already. It’s obvious he doesn’t like his own family.
You do realize they film multiple videos through out the same day. They also film week in advance. He wasn’t taught this stuff when he was younger. Nothing wrong with learning new things at ANY age.
Oh boy not again!!!
thats really scary.. the mower could start up if you dont disconnect the fricken spark plug. i had to turn the video off.. be safe out there.
Joe your best option is to by a toro battery powered lawn mower
It sounds like the carburetor needs to be adjusted..
It's starts but won't stay running is telling me that it the carburetor needs to be adjusted. It would probably only need adjusted just a tiny bit and it should be fine.
Tax write offs are big this year
Love the tittle 😂 happy Tuesday
Ok good all you had to do is run it.
Spray some ether
Wont start without a blade. Needs it for counterbalance
Damn
That’s the wrong blade for that mower and there also maybe a backer plate missing but I don’t think so I think it’s the wrong blade.
Wassup guys?!!
By a toro battery powered electric start
Carbuator
No primer on it??
I'm gonna say he has trash in the gas.
Can't Joe do anything 🙄
White smoke means gas.
I don't like the new weed eaters u have to 20 things n if u don't get it rite u have to start over
Aren't u post to hit a half rubber ball three times
don't pull the lawnmower you flood it I know about lawnmower
Just go buy a new one
Trying real hard not to trash F.J. But how is he not the most selfish, inconsiderate, overly obnoxious “friend”.
I don’t get it. Sorry for despising that man child, I’ll pray for more understanding so I can tolerate this. The videos are great, the large gremlin just irks me
Oil smoke is black gas smoke is white.
First
HOLA LOUNGE TV 😎😎🫶🫶🤘🤘✌️✌️👍👍📹📹📽️📽️🎥🎥
First