I Destroyed A Rare Nerf Stryfe Blaster
Вставка
- Опубліковано 17 лип 2023
- Want to Mod Your Blaster with High Quality Parts? Want to Also Support Flux Labs so we can keep making the content you love? Then Support the Channel by buying from Out of Darts with the Official DrFlux OOD Affiliate Link! outofdarts.com/?ref=qnv0p66y2p
The DrFlux Landing Page
linktr.ee/drflux
Join this channel to get access to perks:
/ @drflux
The DrFlux Patreon: / drflux
DrFlux Patches: silverfoxindustries.shop/coll...
Want to Send Us something to review, or look at, or to say thank you? Then mail to our PO box:
FluxLabs
PO Box 2021
Bremerton, WA 98310
#nerf #nerfmodding #nerfmodder #nerfmoddingcommunity #nerfmods #nerfstryfe #nerfmod - Розваги
ah yes, an unmodded stryfe, the rarest of them all
This guy doesn't OJ
Pretty rare to find a Stryfe if you're outside the US
Hey bud, it’s a classic blue OG Stryfe. That’s what makes it rare bloke
I said what I did because of how damn hard it is to find a un molested one
@@BocoProductions189 i mean they are kinda but not really. I got a couple in the past year or two. If you want one I have a new in box Battlecamo one imma sell
In my experience the motors will just stop, unless you bypassed or removed all of the electronic locks, thermistor, and switches it’s probably one of those that gets wrecked before the motors.
I've used 2s lipo with no problem. Then I used 3s lipo with a buck converter to reduce the voltage ~9v. It works perfectly fine for me
But the question I hear is about 2s😂
I did it a while ago and it worked fine but I wouldn't recommend
I have stock electronics wired with an XT30 and running 2S. No problems yet.
@@dmonhuntr75yeah I just ordered 2s for my Khaos and Nemesis and they should work fine
@@cyborgpunk6668 I did a 9.6v battery mod, and a dual stage trigger mod for my Adventure Force Quantum. I'm very happy with the results.
I just use two 14500 TYPE Lithium and two dummy AA batteries and it works fine.
i had a fun experience of modding a stryfe solely by soldering the XT-60 connector to the AA battery terminals
and proceeding to connect it to the wrong terminals...
Oh no 😂
You can use a 2S especially if you twist the wires of the thermistor together.
i replaced my stryfe flywheel motors with $1 cheap tamiya dc motor
it's actually quite scary it runs off a generic 3.7v 18650 lithium ion battery it shoots quite hard but it's shredding the rubber front part of the foam dart
the rev time is quite long and I'm still using the stock flywheel at least it's good for semi auto
Nah, that's BS, mate. A 3S wouldn't burn any NERF motor instantly. I tried it in a Rapidstrike and it worked for quite a while until I replaced the internals. You probably just burned the thermistor right at the battery tray. Look at your wires with the clamps. Those things could fail even faster
Thermoster for sure, even swapping the stryfe's motors out but still on AAs triggers the thermoster
I reckon bs. I also ran a rapidstrike off of 3s for a while just by soldering onto the battery terminals. Later on I took the thermistors out and rewired it with new switches and that work well. It didn’t burn out on me but I was cautious.
The banana mag 😂
my dad put two lypo batteries in an elite hyperfire and it became a kriss vector it literally shoots an entire drum mag of like 50 rounds in 3 seconds
Omg I need the banana mag
You have an internal fuse that would have blown out on a 2s and a 3s lipo
Shoudve named the video
"How to make a flame thrower in 3 easy steps"
Hey! I really appreciate your vids and one of your vids got me into all the nerf modding and stuff, in that video you built a cyberpunk crusher out of a stryfe. What would be cool is if you tried to make a monkee mods firefly Auto/ Full-auto to make it an actual shotgun
The answer is a solid sometimes, rival blasters can easily take it
It will run just fine on 2s, 3d is severely overvolted, the switches will burn out long before the motors or wires give out.
You can use a 2s lipo with the stock wires
I put a 4s in my rapidstrike and it works just fine
I saw someone hook a 20v dewalt battery to a nerf rival
I modded it to work with 2 serial connected 18650 cells.3.7 volts each 7.4 volts.For a basic math 1.4 volt does not make that big of a difference on a DC motor like this because of the low current.But over 2 voltages for ex around 9-8 voltages it is lethal for both wiring and the motors.Probably 7.5 volts is the limit for sudden on off situations
I was expecting a kaboom
I modded an orange stryfe a year ago by attaching a charging port to replace the batteries. Was that a bad decision?
How is that rare? Is it the british one?
It's rare cause it's unmodded lol.
lolol i dropped a lithium 2s in a fornite stryfe and no problems.
soldered directly to the old AA battery bars lololol
Your results may vary.
3s is hilarious
I put a 2s lipo on my stryfe with a big clunky on off switch on it
Where can I buy that banana mag
dr. flux you did not burn the motor you just burn the thermo transistor
Hello I know you will never see this but I would like you to help me make a half length dart bolt action blaster
Day 2 of asking this: you should try to make a reverse break action gun that loads from the bottom instead of top
The only thing I change is the wires and the battery just because I'm poor
I have that blaster😂😂😂
Wait, THESE ARE RARE?
This just hurts me
Can you mod a ultra pharaoh
They aren’t rare at all though just desirable
I love destroying stryfes
I’m early
Oooh nooo heavy hates guns destroyed it's STUPID engineer POOTISDISPENSER here