There is another way to do it that is actually even better. With this method, you make coils with alternating turning directions, then you solder a straight piece of wire through them to close the coil as a link after weaving them together. Another method, which requires a bit tighter weave specifications uses coils that are all turned the same direction. Rather than soldering a straight piece of wire through to close the link, you actually alternate between soldering the ends of coil pairs. Because the weave is tighter, and there is no additional straight wire between them, you can achieve a thinner overall size. It is harder to get the coil to have the exact right guage, diameter, and pitch for this style of weave though, but you only need to work with one coil.
ua-cam.com/users/shortsTjfnJYdMPGs?si=oeRXyQuU6TQSbdfK Кромку можно сваркой обработать. И размеры проволоки могут быть любыми. За замок - уважение мастеру.
There is another way to do it that is actually even better. With this method, you make coils with alternating turning directions, then you solder a straight piece of wire through them to close the coil as a link after weaving them together.
Another method, which requires a bit tighter weave specifications uses coils that are all turned the same direction. Rather than soldering a straight piece of wire through to close the link, you actually alternate between soldering the ends of coil pairs.
Because the weave is tighter, and there is no additional straight wire between them, you can achieve a thinner overall size. It is harder to get the coil to have the exact right guage, diameter, and pitch for this style of weave though, but you only need to work with one coil.
Yo what is that method
Тогда при сломе одного звена изделие разваливается
Many thanks for sharing the process!!
Very interesting, and great work
How do the get the mesh to look solid are there design templates they melt the one side against?
Awesome
Gran trabajo.
nice!
Good job!!!can you tell me please diameter of spoke and wire?
awesome
Any chance of getting dimensions and measurements?
Quantos metros de fio precisa para fazer uma assim
ua-cam.com/users/shortsTjfnJYdMPGs?si=oeRXyQuU6TQSbdfK
Кромку можно сваркой обработать. И размеры проволоки могут быть любыми.
За замок - уважение мастеру.
Esaka माप कैसे लेते ते हे
Pls
🐝💤💫💥👍
Не понятный обзор для избранных, фото отчет для кого то...
Пытаюсь сделать)
Hi
Map bolo na
Holy cow man cut cho nails
t
Only pictures? Com'on dont be selfish, show a video not pictures