1.Rather than taking the average, for the steel calculation part , can people use the upper or lower limit also ? 2. Does the quantity of steel use cases vary depending on the earthquake zone ? 3. There are some videos where they gave an approximate formula , like per square ft of slap required on average of 2 kg steel . Is it true ? When i used the maximum range (1 % in slap , and 2% in beam ) I got approximately 2700 kg . Could you please clarify these doubts. Anyways highly appreciated for the amazing concepts.
Hi Mam What are the quantities of cement, sand, aggregate, TMT bars and water required for slab of 1500 square feet area if Slab Thickness is 6 inches and Concrete grade is M25?
Sir isilye laboure cost add nahi kiya becoz slab ki casting contracter khud hi krta hai isme aalag se charge nahi dena padta phr aap Rs. 35 ke aacording add kr skte ho
Dear sir, Beam ka size column ke size par depend nahi karta hai vah to structure ke load ke upar depend karta hai best honga aap structure ki kisi achchhe structural engineer se design karva le taki apka structure safe rahe.
Gitti to tonne ke hisab se milta hai Aur baku trailer ke hisab se Aap pls ye bata dijiye gha feet ka calculation kaise kre.. 1500 rs tonne hai gitti Aur 1500 rs trailer sand hai
Dear sir, Actually 90 % cases me alag se payment nahi dena hai to slab ka because contractor ka work hota hai. Agar apko alag se kam kisi se karwana hai to Rs 35 to 40 / sq ft ke rate par kar de sakte hai.
Mam aapko achchhi knowledge he thanks
Thnku
Bahut acha mam 💯💯
Thnku
1.Rather than taking the average, for the steel calculation part , can people use the upper or lower limit also ?
2. Does the quantity of steel use cases vary depending on the earthquake zone ?
3. There are some videos where they gave an approximate formula , like per square ft of slap required on average of 2 kg steel . Is it true ?
When i used the maximum range (1 % in slap , and 2% in beam ) I got approximately 2700 kg .
Could you please clarify these doubts.
Anyways highly appreciated for the amazing concepts.
madam chan mahiti milali {thanks}
Hm
Many Many thanks such a good information. Welcome
Thank you
Good decision
Thnku
Ninw ke pather ki cost add nhi ki mam
Great
Thnku
Thank you mam
Thank you so much sir
Hi Mam
What are the quantities of cement, sand, aggregate, TMT bars and water required for slab of 1500 square feet area if Slab Thickness is 6 inches and Concrete grade is M25?
Sir vidio me yhi to btaya hai.
@@CivilEngineerRajniBhusare I am asking on the basis of M25 grade concreate mixture, 6 inches slab Thickness and water quantity as well
Eng rajini ji good afternoon make video on complete estimate for 1500 sft house ground floor
We will try asap
Mam sorry to say you didn't have to add labour cost. any vy perfect for analysis. Vvv useful
Sir isilye laboure cost add nahi kiya becoz slab ki casting contracter khud hi krta hai isme aalag se charge nahi dena padta phr aap Rs. 35 ke aacording add kr skte ho
Labour charges approximately batayiye
Vo contracter contract me hi add krta hai aalg se charge nahi hota hai ya Rs 35/. Sqft ke according aap add kr skte ho
Ghan fit kise kahte hai
Ghan fit ko hi cubic fit kahte hai
Madam agar two story house he aur column ka size 9 by 18 inch he to plinth beam ka size bhi 9 by 18 inch denge to sahi he or galat
Dear sir, Beam ka size column ke size par depend nahi karta hai vah to structure ke load ke upar depend karta hai best honga aap structure ki kisi achchhe structural engineer se design karva le taki apka structure safe rahe.
Gitti to tonne ke hisab se milta hai
Aur baku trailer ke hisab se
Aap pls ye bata dijiye gha feet ka calculation kaise kre..
1500 rs tonne hai gitti
Aur 1500 rs trailer sand hai
Beams ko milakar hai ye calculation
Jii
1500fit me kitna big cement lagta isa bata o bolo
Jarur bhejna
Aap 1500 fit puch rhe hai ya 1500sqft. Puch rhe pls conform. Then i tell you kitna cement lgega ok
@@CivilEngineerRajniBhusaremama per square feet ka bata dijiye cement ka
Labour Charge add nahi kiya aapne. wo bhi add kare.
Dear sir, Actually 90 % cases me alag se payment nahi dena hai to slab ka because contractor ka work hota hai. Agar apko alag se kam kisi se karwana hai to Rs 35 to 40 / sq ft ke rate par kar de sakte hai.
And another thing will u make 2d floor plan with structure
In future we will make.
Madam aapke no chahiye
Mujhe 1000 sqft ka naksa banwana hai with work supervision
Sorry sir, you can consult with locally engineer bcoz we don't have time.