It gets a lot worse if he applies a poison of Slow to it with a touch of Damage Health and some Ravage Stamina. Sneak and get a backstab bonus as well. Point being he could kill someone seven times all at the same time if he lives his life right. :)
Right now I’m just making knife I’m think I might be done with vids on my channel i just so much harder to film and do at the same time if I get around to recording one of my projects I’ll do a vid
As an Elderscrolls fan I really love Mehrunes Razor and you brought it to life my friend! I have seen a few recreations of this Dagger in 3D Printed plastic and I've seen it done in foam. This is the first time I've seen it in high carbon steel! Well done!!!
Superb craftsmanship! The creation of the pommel just blew me the F away. The best part is 90% of it was made with an angle grinder and Dremel tool. Amazing.
Love watching videos like this because it shows what people can accomplish with a bit of metal, some tools and a whole lot of time and effort. and the result is usually fantastic.
Koss i just wanted to let you know how much i enjoyed the build video you did for this dagger and also how incredible it came out in the end,i have been subbed to your channel for a while and you never fail to impress with your skills in all phases of making,filming and editing,thank you for sharing your work with all of us,all the best to you and yours please continue making knives and filming them,i believe you were born to do it and you never fail to impress as well as surpass the ones that you have made before it :-)
I concur with + Ron Sanford comments. Been subbed a while too, but want to add that your prowess, endurance, symmetry and finish with detailed hand work to your projects is what I appreciate most, whether its a restoration or new build, they are *inspiring*. Thank you +Koss for sharing these and all the hard work that goes into them with us. Hat Tip to you! ~PJ
Only in Daggerfall and Skyrim can it instant kill. In Morrowind it poisoned and degraded the armor of the thing you hit. In Oblivion it still ate armor, but it also had Banish Daedra.
@@theskyrimplayer9854 i actually have thought about making that myself, or the sword but for the dragon bone i would use moose bone instead, but i think if i make the sword it will have to be a 2 part blade becuase i dont think i can get a bone that is large enough in one piece
@@spaceman7019 actually... formally if Mehrunes Dagon was able to put those shards back together, that means he've had to reforge them, right? That means that Mehrunes was a smith himself. And... Holy crap! I guess we've got ourselves on to Mehrunes Dagon youtube channel!..
How did you get it enchanted? Last I heard, an enchantment that powerful was way beyond Farengars knowledge. Excellent work though, really. It is really well finished.
You use some calculations to set your grinding thing, right? To make sure you get the edge the right length and slope? Or is it free hand and eye balling
a long time knife enthusiast, and a long time Skyrim player. Your replica certainly did it justice, while the build video was enthralling. Good Video, Beautiful knife
Lovely knife bro. But believe me, these videos are much more relaxing without the background music. The sheer silence and just the sounds of tools enhances the experience.
I really enjoyed the music choices in this video. Your build is awesome and feels so true to the original. You would blow those Man At Arms dudes out of the water. Awesome dagger!
Beautiful Dagger. I love the worn unpolished finished but would love to see a second version with a polished high shine finish. I think it would be awesome to display them both side by side.
It's a bad idea to wear them using angle grinder. They may get caught by the disc together with your hand. I'll let you imagine what happens afterwards.
With the pre-patch glitch and everything on all applicable clothing and necklace and ring as well ... Ahh! The good old days!! Had that and the Ohgma Infinium glitch with the bookshelf. *True OG's know what I'm sayin'*
Remember to equip fortify alchemy equipment first, then craft fortify restoration potion. Unequip the fortify alchemy equipment, drink the potion and repeat for several times. Then, you brew fortify enchanting potion, drink it, and enchant god-tier weapons.
Wow, awesome build! Really beautiful and also looks very stable. I have seen many attempts of building that thing but this is the best so far. Respect!
First song name please?
Ugonna Onyekwe - Overcome
Could you write also the name of the second song please? (from 2:40 ca.) They're wonderful !
Hanu Dixit - Distant Lands
the song called budots bro,, welcome😊
What is the end song?
make sure you dont touch the edge, that thing has a 2.5% chance to instantly kill
😆
Ahctuallyly it is 1.98% you fhhearking Nooob
(Sorry not sorry)
@@leadedeagle4169 #Roasted
Lol depending on your enchanting skill it could go higher due to a bug lmao
It gets a lot worse if he applies a poison of Slow to it with a touch of Damage Health and some Ravage Stamina. Sneak and get a backstab bonus as well. Point being he could kill someone seven times all at the same time if he lives his life right. :)
Nerds with power tools are the best nerds
Yeah nobody would ever guess based on my channel but I’m a total weeb and nerd be made a few fallout weapons but never any videos on them
Argentea League on what
Right now I’m just making knife I’m think I might be done with vids on my channel i just so much harder to film and do at the same time if I get around to recording one of my projects I’ll do a vid
Yes we are. Thank you.
I make stuff out of leather
As an Elderscrolls fan I really love Mehrunes Razor and you brought it to life my friend! I have seen a few recreations of this Dagger in 3D Printed plastic and I've seen it done in foam. This is the first time I've seen it in high carbon steel! Well done!!!
This man is quite the artist with a grinder, holy crap. And that playlist too, killer video!
The Mythic Dawn wants to know your location.
Nicely done. Your free hand skills are exceptional.
His work is accurately planned and excuted
Please provide a link to where you purchased your heat resistant hands.
You need atleast 80 in blacksmithing
Lol same
Is this really considered blacksmithing though....🤔
He enchanted them
Yacov Hays why?
Superb craftsmanship! The creation of the pommel just blew me the F away. The best part is 90% of it was made with an angle grinder and Dremel tool. Amazing.
That little grinder sounded like Cartman crying "noooo"
Love watching videos like this because it shows what people can accomplish with a bit of metal, some tools and a whole lot of time and effort. and the result is usually fantastic.
Koss i just wanted to let you know how much i enjoyed the build video you did for this dagger and also how incredible it came out in the end,i have been subbed to your channel for a while and you never fail to impress with your skills in all phases of making,filming and editing,thank you for sharing your work with all of us,all the best to you and yours please continue making knives and filming them,i believe you were born to do it and you never fail to impress as well as surpass the ones that you have made before it :-)
Thanks for this inspiring comment. I appreciate this.
I concur with + Ron Sanford comments. Been subbed a while too, but want to add that your prowess, endurance, symmetry and finish with detailed hand work to your projects is what I appreciate most, whether its a restoration or new build, they are *inspiring*. Thank you +Koss for sharing these and all the hard work that goes into them with us. Hat Tip to you! ~PJ
"I am pleased mortal, I will give you my razor. Use it to wreak havoc on Tamriel."
-Mehrunes Dagon
I wanted to comment that.
Now fight a bunch of Dremora.
Who is worse Mehrunes Dagon or Molag Bal
That's awesome, well done I like your style. Your really good with a dremel!
Thanks. I also really like your fantasy projects.👍
Surgeon writhing an angle grinder too
That will be 500 septims
I only have skooma.
I have 6 dragon bones, will this do?
Speech 100
Ill give you 118 septims and sell it back for 1150
One of my favorite weapons in one of my favorite games. Great craftsmanship!
I love Morrowind too!
Oblivion too :D ... well, with an add-on. edit-> Daggerfall too by the looks of it.
I got it in Skyrim. Does it have the instant kill chance enchantment in all games it is in?
Only in Daggerfall and Skyrim can it instant kill. In Morrowind it poisoned and degraded the armor of the thing you hit. In Oblivion it still ate armor, but it also had Banish Daedra.
Woah, the armor degrading thing sounds a lot cooler.
This guy is a maestro with that angle grinder. Absolute precision. I can't wait to make this one
10/10 would bring to Sovngarde
I'm not sure if the Nords would allow a Daedric artifact in Sovngarde...
@@Deanopps i accidentally killed alduin with one shot
@@mcuniboob fucking same
Просто шикарный кинжал в чьюто коллекцию, респект и уважение мастеру, гриндер просто супер!!!😊😉👍😃😀👏🖒👍👌💪🏅🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Awesome work, with many details and a very good ending,regards
Don't ever even look at the dislikes. Forget them. You are an awesome artist. Congratulations for you beautiful work.
SMITHING
100
His Smithing is actually 15 because he never actually forged the dagger, he just ground everything out.
Once he can forge a dragon bone dagger, then he will have 100 smithing.
To forge one of these weapons from Skyrim would be a very difficult task for a good amount of smiths, I understand perfectly why he used these.
@@theskyrimplayer9854 i actually have thought about making that myself, or the sword but for the dragon bone i would use moose bone instead, but i think if i make the sword it will have to be a 2 part blade becuase i dont think i can get a bone that is large enough in one piece
Since Mehrune's Razor is a Daedric weapon, that means he only needs to be at level 90 smithing
Don’t ever let anyone take that angle grinder from you. You are a master artist with that thing.
This was so good I would but it without a doubt. My favorite weapon in the series.
In french we say that you have "Golden Hands", meaning that you are very gifted. That was an awesome project. Love the result. Bravo!
Maravilhoso,faca ficou simplesmente magnífica muito bom parabéns pelo vídeo, canal está demais.
You’re ridiculously good with that grinder
Amazing dagger. This is the type of things that really makes me want to get into blacksmithing.
“I used to be an adventure like you. Then I took an arrow to the knee.”
-Whiterun Guard
Did you know that’s a joke about settling down and getting married
@@cjlsniper or actually getting shot in the knee.
Sin duda el el mejor que he visto hasta ahora. Excelente trabajo. Felicidades!!!!!
Magnifique travail et une précision incroyable bravo :)
What.a.knife.great.workmanship
There.are.no.words.for.it.but.BRAVO
enchant it
Davis you can't, it's already enchanted and a unique item
If you get enchanting to 100 you can add another enchantment
@@nolife3986 ... Shut up. No way in hell.
No Life yea but this guy only has 100 smithing
@@nolife3986 Not on items that are already enchanted. You can't mess with unique items at all.
That Dremel work was awesome.Nice job.
Do the dragon priest dagger next, I'm starting on one when i get more coal in.
あなたの作ったものはどれも素晴らしい！
Mehrunes Dagon would be pleased!😈😈
I like how you did this. Other people just cast metal from 3D prints, which is cool, but you made a real friggin' blade.
Would’ve been even better if he had forged it from a billet of steel
Would have been better if he went on an epic journey to collect all the pieces and get some godly entity to put them back together
A hollow handle..
@@spaceman7019 actually... formally if Mehrunes Dagon was able to put those shards back together, that means he've had to reforge them, right? That means that Mehrunes was a smith himself. And...
Holy crap! I guess we've got ourselves on to Mehrunes Dagon youtube channel!..
As a fan of Skyrim this is so amazing keep up the great work
How did you get it enchanted? Last I heard, an enchantment that powerful was way beyond Farengars knowledge. Excellent work though, really. It is really well finished.
VERY nicely done! And you did it with tools that I actually have access to! Thanks for the work!
Just beautiful like 😘 nice😍 Dagger from Skyrim😍😎😍😎😍😎
Demon girl you're cute
And from Oblivion.
and Morrowind
They amount of emojis you used is your IQ
Great craftsmanship inspires me to do my own protects and a knife from a brilliant game. Well done
COMPLIMENTI, OTTIMO LAVORO, VERY VERY NICE. 10+
This is by far the best blade design that I've seen!!! What a beauty.
"The finest weapons and armour."
"Oh a bit of this and a bit of that"
Beautiful knife. Liked you artistic design.
Looking awesome, do you quench it in oil or water ? Nice Video
Thanks. In water.
amazing work, I hope this video gets lots of watchs and likes!
You use some calculations to set your grinding thing, right? To make sure you get the edge the right length and slope?
Or is it free hand and eye balling
yes, I set angle to remove half blanc thickness, at the required bevel width
this man is an artist
Imagine someone enter to his house at night
a long time knife enthusiast, and a long time Skyrim player. Your replica certainly did it justice, while the build video was enthralling. Good Video, Beautiful knife
He has this in case an intruder comes into his house, seeing as it has at 2.5% chance to instantly kill.
WOW this turned out so well!!! Great work! 😄
U like a surgeon with that angle grinder man... well done, beautiful result...
this weapon is from daggerfall originally, cut content
If I coul hit like as many as possible I would. Amazing skills, and all the pieces of art are awsome
MY ABSOLUTE FAVORITE FUKN WEAPON IN THE WORLD OF TAMRIEL
Lovely knife bro. But believe me, these videos are much more relaxing without the background music. The sheer silence and just the sounds of tools enhances the experience.
Great now to break it into shards and scatter them across Skyrim
A master doing his masterpiece
"Merhune´s razor" sound´s like some logical fallacy.
Hanlon's razor and ockham's razor ✌
"I am alive" is the logical fallacy the razor tests...
Stunning work, well done man!
Forgot to have it enchanted by Lord Dagon
I really enjoyed the music choices in this video. Your build is awesome and feels so true to the original. You would blow those Man At Arms dudes out of the water. Awesome dagger!
RESPEKT!!!!!🔝🔝🔝🔝🔝
wahmen
*REEEEEEEEEEE*
Beautiful Dagger. I love the worn unpolished finished but would love to see a second version with a polished high shine finish. I think it would be awesome to display them both side by side.
Man I need to level up my smithing
Your craftsmanship is outstanding
Dracula's butter knife.
Great job; you're a wizard (no pun intended - maybe) with a dremel tool, too! Knice knife.
5:30 I keep hearing ne ne neee which is no in Hungarian...
Pretty close to "no" in Polish as well (Nie)
Or it's a great quote from Runs-In-circles from The Elder Scrolls Oblivion: Shimmering Isles
@@epicjn Or he has Monty Python and the Holy Grail playing in the background. "We are the Knights who say Nee!"
한국에도 이런 채널 많이 생기면 좋겠다..
Please forge volendrung (skyrim)
That’s such a nice dagger!
1:27 Safety gloves are for little girls.
Nart Wumar they are for people who actually do things with their hands, and want to keep them.
It's a bad idea to wear them using angle grinder. They may get caught by the disc together with your hand. I'll let you imagine what happens afterwards.
well if you don't wear them, there's a chance you get killed in one hit
5:17
TRULY
Gloves are for milk drinkers
Well worth the wait to see the finished result! Well done!
I swear this is the ideal knife shape.
Did you drink fortify smithing?!
With the pre-patch glitch and everything on all applicable clothing and necklace and ring as well ... Ahh! The good old days!! Had that and the Ohgma Infinium glitch with the bookshelf.
*True OG's know what I'm sayin'*
Remember to equip fortify alchemy equipment first, then craft fortify restoration potion. Unequip the fortify alchemy equipment, drink the potion and repeat for several times. Then, you brew fortify enchanting potion, drink it, and enchant god-tier weapons.
@@muhammadnursyahmi9440 Yeah you got it lol!
this video was really relaxing for some reason ! Great work !
Dear Koss i want you to try to make any blade in the next video but it has to be from a game i hope you read this. Can you pin this comment.
That’s incredible! Love your work!
Skyrim, Merneus
It´s actually from the Morrowind lore, but yes, it apears again in Skyrim. :)
He has forged it all hail the new master
It was excellent !!! Excellent artist !!!
Watching these makeshift videos I am amazed that those crafters in old days did it without electronics.
Clever! Good work. Loved it
You've got a good, steady hand with that cut-off wheel.
Very nice finished product. You made the hilt/crossguard way harder than it had to be by drilling all those holes.
That's a professional piece, incredible result.
Wow that is such a cool looking knife!
your work is amazing
Now that’s a work of art
I don't know why...just brilliant...loved it from my heart
Just wow my friend. Great work.
Wow, awesome build! Really beautiful and also looks very stable. I have seen many attempts of building that thing but this is the best so far. Respect!
That looks BEAUTIFUL!!!
OH my..... stunning work