Full DIY Paint Correction NIGHTMARE - Chevy’s Paint Quality?
Вставка
- Опубліковано 28 вер 2024
- The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/lonesta...
Spending 14 hours with a buffer never looked so good... FINALLY giving the NIGHTMACHER F-1LE the attention it's needed. I don't have much paint left...
Mahalos from the Lonestar Hawaiian Garage!
Professional Inquiries: LSHawaiian@gmail.com
Follow on Instagram @Lonestar_Hawaiian
Looking to do your own paint correction?
Everything you need to get started here: amzn.to/3OuM4L8
Link to the polish (compounds) I use: amzn.to/3NjnP1v
Link to the BEST polisher ever: amzn.to/3A2oph5
Link to the best polishing pads: amzn.to/3xQRXM2
New to the ZL1 Videos? Check out the delivery of my dream car:
• Camaro ZL1: [3 years o...
BIg mahalos to Skillshare for sponsoring this video 🤙🏽
Aloha
#Camaro #ZL1 #PaintCorrection
![CERAMIC Coating is DEAD... 7-Year GRAPHENE Coating [Paint Correction & Install]](http://i.ytimg.com/vi/vCt5lWmHmcU/mqdefault.jpg)
![MY SKETCHY PLANS WERE APPROVED BY THE CITY ⚡️ - [POWERING UP]](http://i.ytimg.com/vi/kio0ew6xT5A/mqdefault.jpg)
Get it while you can! The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/lonestarhawaiian06221 -- What should we do with the OSHEN accent on the wheel? Let me know 👇🏽
I just did my first ever paint correction on my 07 Impala SS I watched you do it to both your trucks and slowly bought Adams products. Got the polisher you recommended that you have for Christmas and ordered Adams compound pads and polish. It took me about two and a half weeks to do because I only got to work on it about an hour and a half a night and was gone on the weekends. Took up my dads garage for a long time😂😂 It turned out pretty good but definitely need more practice at it! Adams graphene spray coating is what I put on it two nights ago after I finished paint work and so far it works amazing. Thanks for your recommendations on equipment and products! It all started from watching you! I owe my new spendy addiction to your sir😂😂😂
love the videos man both me and my dad watch and the funny thing is he has a 22' trail boss and i have a 07' silverado 😂
Great combo 🔥🔥
Looks good! My 2022 Camaro paint was destroyed by the dealership as well. I took it to a detail shop to have it corrected and even they were shocked. Ugh.
I Detail as a side hustle, GM black is my worst favorite to paint correct, as it takes way to long to get close to perfection. But when it is cleaned up and coated for protection it does look great! Great work with the chemical guys, but their are some other products that would of cut your time by about 5 hours. GET That shop going so we can all drool over it!
Yeah the chemical guys stuff isn't the greatest. Check out some of the pro lines in maguires. They have a 3 step.
Inner barrel with ocean wrap would be best. I would have also wrapped the entire caliper in that ocean color
Where did you get your garage clock. Thanks
I always liked it the second way the outer scoop?
And I want my Denali to be Ocean... so where do I get it?
I can definitely say the paint on my 2022 LTZ 2500, embarrassing quality. I literally bumped my lunch box on the rear panel by gas door and Poof paint chip. my 2009 Silverado I have bumped 1k Times no chips
Where did you buy that tool to test the paint thickness? Thanks
2 cents: inner barrel. New shop LIFT. Safety First for you and family.
New cars from the manufacture are rarely in perfect condition from all manufactures. Dealers try to fix the issues but always fail. Never have the dealer wash or detail your ride. They suck & don’t care about your car.
First mistake here is the chemical guys stuff, not good. Camaro paint is a horror show and can be a PITA. I know that paint like the back of my hand. Camaros is all I do now. I probably done 30+ camaros here in South FL. Here is the recipe that works. STEP ONE: Urofiber 50/50 microfiber pad. if car is really bad use Sonax Cutmax, not so bad use Sonax perfect finish. STEP TWO: Rupes Yellow pad and Sonax Perfect Finish. thats it!!!!! now panel prep and coat how you wish. As you can see, its only a 2 step deal, not 4.
Bro can you take one of your vehicles to carmax to see what they’ll give you don’t sell any tho ! Just curious to see what they give wanna see if it’s fair or not. Probably not tho.
Yeah right worst years of Silverados ever
very click-baity title. Paint was not destroyed.
I think is time for you to start looking at Ford
I’m sure he’s going to be like me and keep his Camaro.
I’ve always been a GM guy. I’ll never own a Ford. That being said, GM quality has definitely taken a hit. If I buy another truck, it will likely be a Toyota.
Looks great but dump chemical guys stuff. Grab some rupes foam and wool pads. Also lake county or Meguiars microfiber pads cut great too. It’ll help cut your time in half. Check out Esoteric here on UA-cam, they give great tutorials.
I like the inner wheel spoke. Suttle but cool at the same time. Btw that Chemical guys compound looked like it dusted pretty badly.
I'm a professional certified detailer. I almost lost my breath when you started that cut and polish and then pleasantly surprised when you did it all properly. Great work!
This is why I sold my 2017 L5P and bought a 2006 SLT GMC LBZ with 45k miles on it! I love this truck!
That’s what I did with my Silverado and surprise they actually listened 😂😱
The inner wheel I think would like great. Definitely something different
The inner barrel would be a nice pop of contrasting color to the black, esp after the color correction! Great job brotha!
I’d keep it how you had it but I’d definitely get the bremos powder coated in the teal color I think it would look a lot cleaner love the vids by the way I have a similar fleet only a lot more budget friendly 03 Silverado SS 2010 Camaro SS and 2017 z71 ltz dreaming of a zl1 like yours one day
🤙🏽🤙🏽
I’m digging the idea of the brembos powder coated in the teal and leaving the rims black. I don’t like messing with a good thing and that ZL1 is badass as it is! Would definitely help it stand out without overdoing it on the teal. The shine on that paint correction is top notch! Great video brother
Great job on the paint correction. I hate Chemical guys products...just my opinion. I try to use high end stuff and it pays for itself when detailing. As for Avalon king stuff...I hear a lot of mixed reviews since it is sourced from China some batches work better than some.....coming from detailing UA-camrs. Great videos and content buddy
Where can I buy the merch brah?
Its remove clear coat, not paint....love the channel
Glad to see you followed suit and removed ALL red on the Z like mine, including calipers. Time to ditch the chrome and paint them black (or get aftermarket flat black).
Outer spoke looks great but matching the trail boss looks great too. 👍
Just finished up a graphene ceramic coating on a GMC Sierra and it was an absolute gem. It kicked my booty, but it turned out awesome.
The bottom on the T1 is actually a chip coat that goes on before the paint and clear coat.... just thought you would like to know.
Hey Man, loving your videos. I realize this is a year old but I was curious what polisher that was at time 14:46 on video "Full DIY Paint Correction NIGHTMARE - Chevy’s Paint Quality?" The Camaro looks Great!
I love the color of the wrap...it really pops against the black! I have subbed to your channel.
Good job man! Def do a video when you do the boss. I’m currently going to be starting mine before the 4th.
Hey bud check ur wrap #1 on the rear wing i caught a good camera angle that shows its peeling off a lil ... sweet ride so far man i just picked up a silverado custom rally edition all blacked out no chrome at all 👌
Another great video! Love the ocean accents, I vote for no hash marks on the wheels.
I have a 2005 Dodge Ram with 250000 miles and a 2018 Chevrolet Silverado with 65000 miles I hate to say it but the old dodge is just a smoother ride you don’t feel any shifting or any weirdness with the Chevy dropping into v4 and grad braking and hard shifts just feels shitty driving
Im starting my build too haha started with bullet antenna and i got eibach pro truck stage 2R in the mail i cant wait to install it lifting front 2" and rear 1" gunna be sweet and ride soo much better even better them fox 😏👌
The car is black, you had it outside the garage for 10 minutes ...it needs a wash ... AGAIN.
GM and Ford quality have definitely gone down in recent years, never thought I'd say this, but right now Ram has the better truck
If it was me..I would powder coat your brake calipers that Ocean green 😍😍 cross drilled and slotted rotors would be sick brotha!
I would say leave it as you have it. The other rim decals looks cheap.
Impossible to keep the paint even and "sheened".Im correcting and wrapping mine in a "flat" color.
what about hockey stick stripes on the side?
I like the original placement of the wrap on the rims. Not a fan of the new options
Inner barrel and spoke, 1 spoke bro....Home try it!!!
What's the Ocean color? Gonna do my rotors on my 19 Denali
Dude you’re a beast 🔥🔥
Cant wait to see the shop build!
Never new about one of those tools before thanks
Inner spoke is a good touch and it’s different take no one does
keep the stripe as you had it on your wheel
Where can we get those hats and shirts?
Outer spoke looks 🔥🔥🔥
Inner spoke
Inner barrel
Inner barrel
9 hours of buffing....now I know why my bowties don't look as good :D
😅 *14 hours… it took so long.
You could definitely cut down the paint correction process down to 2 or even 1 stage with better compounds/polishes. The Last Detail has the Last Cut and the Last Polish! Great products and makes the process a whole lot easier and more enjoyable
chevy 4 ever.. sorry bout the paint..
dont do an video.. of chevys all electric silverado..
Hey bud, great job on the paint correction, as always I love your attention to the little details! I highly recommend the ExPel film on the danger areas before you apply your ceramic coating! I have done the same process to all my vehicles (all are red) and they all look amazing! I'm really looking forward to your shop build, I'm still getting crap from the City about everything I want to do for my shop/man cave build! It will get done one way or another, take care and don't work to hard!
Realize this is late, but could i get some info on what you treated you garage floor with. About to complete a new and like the look under the lighting. Was your finished concrete layer smooth or floated in any special way? Thanks. Congrat’s on getting to 100,000. Keep it Up.
The “extra clear coat” on your truck is actually an anti chip material that is applied on the e-coat right before the primer is applied. It adds extra protection from rocks and debri. Some vehicles get it on the front of the hood also.
P.S. love the ZL1!!
Absolutely amazing job braddah, hana hou keep on keeping on blessings and aloha cheeeeehoooooooo🤙🏽🤙🏽
Do you like chemical guys better for your paint correction than Adams products. You should try Rupes products they are great
Paint looks wet, Turned out sweet! 🤙🏽
Where did you order that teal wrap from? I'm interested in ordering a custom wrap color.
Great job on the ZL1, My opinion, The Ocean Stripes on the barrel.🤟🏻
Inner spoke for sure. Maybe even the bowtie outline on the grille.
I like the inner spoke wrap idea. A little less in your face but they all look good to me.
What’s up bro you work in the oilfield
inner spoke for the vinyl!
Car looks amazing bro🔥
You need a new buffer!
Inner spoke gets my vote. Also did you retorque the wheel nuts when the car was on the ground?
Thanks! And yessir. I always torque and then retorque after the first drive
Aaaaand this is exactly why I charge minimum $1,500 to correct and coat a black Camaro. Modern GM black is so difficult to work with.
In the future try some rupes wool pads for the heavier cutting. You’ll save a ton of time. Obviously you’ll have to come back with 1/2 more stages of polishing to get rid of the leftover haze, but you’ll get the deeper imperfections out much faster. Rupes foam pads are also 👌🏼
I appreciate the tips!
You gotta get that ceramic coating to protect from that. I had my car at the dealership earlier today and they kept asking me what I put in my car because everything just slid off 🤣 they can't even scratch it because the coating heat treats itself
Love your videos!! Cheers to another Camaro Owner UA-camr 🤍 congrats on 100K 🏁
when you say the dealer took paint off your car, that is false. It is the clear coat they took off, not the "paint".. If they got down to the paint, it would look dull, due to the clear coat being gone.