Genius jigs you build - simple, strong, but very effective. I'm looking into doing my own drums soon, and these vids you've posted are going to be HUGELY helpful. Thanks!
Hey. I have a possible idea for you. If you ran that loose end of the threaded rod through a nut in a separate board that is stationary, as you spin the shell, it would pull itself automatically across the router. The one problem I see with that though is you would have to spin it all the way on and off. A solution to that could be that you saw the nut in half and use a clamp to squeeze down on the rod when you get the jig in place. Just a thought. Thanks for the vid.
I've just developed a jig that's exactly like you just described! Follow my channel if you like, I'll be making a video of it in action in a couple of days
Can I ask what shape router bit you would advise, flat bottomed or round ended like a test tube shape? PS I love your vids, shows what can be acheived with modest equipment and an inventive approach
Any catastrophes while using this? Like major chip out, shell coming off and shooting across the room, broken bits, etc. Thanks for the great videos, from Long Island, NY! :)
Not so far. I think this method is less risky than using a lathe because the shell is turning very slowly. I guess a broken router bit or a bit coming loose would be the main risk whenever you use a router or router table, but that's never happened to me so far!
Hi I got a question if u dont mind ,what would be the sort of problems i would come across if i was to try to make a drum with only original ancient tools ?? Thanks for uploading !!
I am not sure exactly what tools you are talking about. Do you mean hand tools rather than power tools ? I know some drum makers do everything without using power tools, but routers and electric sanders, etc, really help to speed up the process. Check out the videos by Smileythejazzcat, he does almost everything by hand. He uses sand paper to round his shells!
You should be addressing your question to true woodworkers, not people whose "claim to fame" is limited to making drum shells. A woodworker would talk about "draw planes" & "spoke shaves" (see videos covering these tools which have been around "for ages"). That's what was used before the advent of machinery meant to increase production rate. The only time I have employed a router was when I shaped the edge of the drum that makes contact with the drum head. Another suggestion: During the last week I came across two videos showing how the shells for "African" drums were/are traditionally made using hand tools that are "native". With a little imagination the same can be used to construct the snare/bass/floor Tom Tom.
Rudimental Chef 1/2" shank is more stable then a 1/4". If you're not taking a lot off (and you shouldn't be), a 1/4" will be fine. If you need a little more stability making dados through hard woods for example, I'd go with a 1/2". I try to always go with 1/2" just for the piece of mind and I work with mostly hard dense woods...but I've used 1/4" at times and nothing bad yet lol. GOOD LUCK! 🍀
I normally use a normal half inch straight bit. They work well as long as you replace them once they are dull and straight bits are the cheapest bits to replace. Some other drum makers talk about using bowl bits or dished bits, as they can leave a smoother finish on the inside, but those bits are much more difficult to source and a lot more expensive!
Just wanted to thank you for posting your Jig videos! I just built my first stave drum and your jig setup worked fantastic! Thanks from Chicago, IL.
Genius jigs you build - simple, strong, but very effective. I'm looking into doing my own drums soon, and these vids you've posted are going to be HUGELY helpful. Thanks!
Another great jig. Thanks a lot for the instructions. Will be a great help.
Just found my weekend project... Thanks!
Hey. I have a possible idea for you. If you ran that loose end of the threaded rod through a nut in a separate board that is stationary, as you spin the shell, it would pull itself automatically across the router.
The one problem I see with that though is you would have to spin it all the way on and off. A solution to that could be that you saw the nut in half and use a clamp to squeeze down on the rod when you get the jig in place. Just a thought. Thanks for the vid.
I've just developed a jig that's exactly like you just described! Follow my channel if you like, I'll be making a video of it in action in a couple of days
Hill Country Percussion wouldn't it cut a spiral ?
genius! but how did you clam and center the shell to the chipboard? seems like being off by less than a mm would give you a warped finish
Can I ask what shape router bit you would advise, flat bottomed or round ended like a test tube shape?
PS I love your vids, shows what can be acheived with modest equipment and an inventive approach
Thank you. great ideas
Any catastrophes while using this? Like major chip out, shell coming off and shooting across the room, broken bits, etc.
Thanks for the great videos, from Long Island, NY! :)
Not so far. I think this method is less risky than using a lathe because the shell is turning very slowly. I guess a broken router bit or a bit coming loose would be the main risk whenever you use a router or router table, but that's never happened to me so far!
Hi I got a question if u dont mind ,what would be the sort of problems i would come across if i was to try to make a drum with only original ancient tools ?? Thanks for uploading !!
I am not sure exactly what tools you are talking about. Do you mean hand tools rather than power tools ? I know some drum makers do everything without using power tools, but routers and electric sanders, etc, really help to speed up the process. Check out the videos by Smileythejazzcat, he does almost everything by hand. He uses sand paper to round his shells!
Murray Drums cool I will thanks for that !
You should be addressing your question to true woodworkers, not people whose "claim to fame" is limited to making drum shells. A woodworker would talk about "draw planes" & "spoke shaves" (see videos covering these tools which have been around "for ages"). That's what was used before the advent of machinery meant to increase production rate.
The only time I have employed a router was when I shaped the edge of the drum that makes contact with the drum head.
Another suggestion: During the last week I came across two videos showing how the shells for "African" drums were/are traditionally made using hand tools that are "native". With a little imagination the same can be used to construct the snare/bass/floor Tom Tom.
When milling the outside, is it best to use a 1/4" or 1/2" shank???
Rudimental Chef 1/2" shank is more stable then a 1/4". If you're not taking a lot off (and you shouldn't be), a 1/4" will be fine. If you need a little more stability making dados through hard woods for example, I'd go with a 1/2". I try to always go with 1/2" just for the piece of mind and I work with mostly hard dense woods...but I've used 1/4" at times and nothing bad yet lol. GOOD LUCK! 🍀
Thanks You. I almost use 1/2" chip board glad I asked
What sort of router bit are you using?
What type of bit do you suggest using?
I normally use a normal half inch straight bit. They work well as long as you replace them once they are dull and straight bits are the cheapest bits to replace. Some other drum makers talk about using bowl bits or dished bits, as they can leave a smoother finish on the inside, but those bits are much more difficult to source and a lot more expensive!
Murray Drums u
what is the thickness of the chip board round?
It's about 15mm thick but I would recommend using 18mm (3/4") MDF or ply