A-10A Warthog: AGM-65 Maverick Tutorial | DCS WORLD

Поділитися
Вставка
  • Опубліковано 27 жов 2024
  • TUTORIALS: grimreapers.ne...
    PATREON(monthly donations): / grimreapers
    PAYPAL(one-off donations): www.paypal.me/...
    WEBSITE: grimreapers.net/
    TWITCH(stream): / grimreaperscap
    FACEBOOK: / grimreapersgroup
    TWITTER: / grimreapers_
    DISCORD: / discord (16+ age limit)
    Want to join GR, and have DCS? Join here: / discord (16+ age limit)(You must own minimum 3 DCS WORLD modules/planes if you want to fly)
    #GRTutorial #DCSTutorial #A10A #Warthog #DCSWorld

КОМЕНТАРІ • 85

  • @stevedimond267
    @stevedimond267 4 роки тому +81

    I gotta say, I finally got a computer to run dcs. Your tutorials have given me the confidence to get in there and try. I was quite intimidated watching pros play. Thanks and hat's off to you.

    • @astrortv8780
      @astrortv8780 3 роки тому

      which graphics card are you using. I have RX 6800 and it looks as if its not enough :( , or maybe I have to optimize settings...

    • @Goldn177
      @Goldn177 2 роки тому

      Me too! Just two years later lmao

    • @laze_bean5869
      @laze_bean5869 2 роки тому

      @@Goldn177 Same XD

    • @deetwodcs4683
      @deetwodcs4683 2 роки тому +1

      @@astrortv8780 The game isn't optimized well, you should install the game on your SSD card and have 16gb of ram or more is even better ! A good or rather OK graphics card these days for this game is an nvidia gtx 1060ti or the one I have the GTX 1070 is necessary if you want to run the game on high. If not, I than you should try to get a bit more ram as that is a cheaper upgrade than a new graphics card (!) and install it on your SSD if you have that. Installing it on an SSD really improves performance a lot, so do that, install the open beta on your ssd where windows is installed! You get used to flying at 50fps while dropping to 47fps after a while. The constant 60fps DCS youtubers have is a pipedream for most people!

    • @stevebands
      @stevebands 7 місяців тому

      Me too just start playing watch these videos

  • @hizokuto
    @hizokuto 5 років тому +48

    Combat Arms Training and Maintenence (CATM) version of the AGM-65K. Its the non launching inert training version with the electronics. That way people can simulate using the systems and slewing without actually firing it.

  • @PanaGringoBarefootBass
    @PanaGringoBarefootBass 3 роки тому +13

    Thanks for this, Cap. I needed this! After 2 years of watching videos, yours mainly, I've finally got a new computer that will run DCS and waiting for a cheapo Logitech joystick to be delivered to me in Panama. In the meantime, I bought FC3 last night and learning/practicing using a keyboard/mouse. If it weren't for these various videos I'd be totally lost. ATM, I'm learning the A10 in a practice scenario I created in mission editor. Hopefully, I'll be a bit more proficient with the workings of this thing once my joystick arrives. In theory anyway. Again, cheers mate!

    • @grimreapers
      @grimreapers  3 роки тому +3

      Pleasure

    • @PanaGringoBarefootBass
      @PanaGringoBarefootBass 3 роки тому

      @@grimreapers Followed everything you said....I thought anyway. Have Mavs selected, display yep. As you did I go to lock on to the ground near the targets, which this FC3 version says is "ENTER", it fires the gun. Oy vey.

  • @cmibm6022
    @cmibm6022 5 років тому +10

    As I have not yet seen a DCS mission with the aim of taking out a single apartment in high rise, I recommend using the IR versions (D and G) at any time. Such a mission might by the way be quite fun: The no1 bandit is in the flat on the 7th floor, the NE corner of the building at position xxx,yyy - take him out with no collateral damage!

  • @hog8035
    @hog8035 2 роки тому +5

    These Reapers tutorials are all over the place

  • @kelvaris1
    @kelvaris1 5 місяців тому +1

    Thank you for this. I've used it a lot.

  • @DedicatedAngler
    @DedicatedAngler Рік тому

    Thanks for taking the time to make these videos, they've been fundamental in helping me get airborne and into a touch of action.

  • @chrismaas8466
    @chrismaas8466 2 роки тому +2

    Thanks for doing these tutorials they are really helpful, keep up the good work.

  • @Hachikuzi
    @Hachikuzi Рік тому

    So helpful!!
    Thank you Grim see you again somewhere in the sky!!

  • @paracelsus9510
    @paracelsus9510 5 років тому +5

    Everyone who comes here because of mission number one:
    Wheel in from steerpoint two equipped to the max with mk-20s put them about 1000 feet apart and carpet bomb that column of tanks.
    There is too much clutter to employ mavericks on those tanks - the ones in the clearing to the right are easy though . Don’t get closer than 8 miles if you use Mavericks kill the shilkas and then you can roll on the tanks with your cannon.
    Brrrrrrrtttt

  • @firatutku38
    @firatutku38 4 роки тому +2

    Thank you for everythings ı love your Tutorials.

  • @Jim610
    @Jim610 5 років тому +5

    CATM = Captive Air (launch) Training Missile

  • @moitoi4064
    @moitoi4064 3 роки тому +1

    CATM stands for Captive Air Training Missile, they are inert and stay on the olane.

  • @GreenBlueWalkthrough
    @GreenBlueWalkthrough 2 роки тому

    Thanks for this got them to work once then never again... turns out you just have to be really patent with them... something I can't normally do in the missions I fly... shame I loved these guys in Acecombat.

  • @snakeye5053
    @snakeye5053 5 років тому +7

    Hand salute to you cap.
    I am attempting to complete the first mission of the A-10A campaign in FC3. I have watched your vid on how to lock/aim/fire the AGM-65 several times and have set my controls up exactly as you suggested. Still not getting the results I want so therefore I am reaching out for assistance.
    First thing, I have a circular display in the upper right corner of the screen. It is a nav/target map. I have been unable to remove it. Whenever I try to zoom in/out on the ir seeker display, the input is reflected on the nav/target map. Not what I want.
    Next, when I press the target lock button I do not get a lock on the terrain. The ir sensor snaps to a different target. If I turn and fire on that target I do get a shack. In this mission my primary target is 3 T-72 tanks but I can not get a lock on any of them.
    In your video you mentioned a manual. Where do I find these manuals. I would like to read them.
    I appreciate any help you can give me.
    I did try to join the training server but my ping rate is too high so until I can correct this I will be solo and continue to watch all of your great videos from the sidelines.
    Thanks,
    Snakeye505

    • @wheelerthree
      @wheelerthree 5 років тому +1

      I just did that mission myself and I am sure (now that 7 mo have gone by) that you have completed it by now. The circular display is part of your gameplay settings. The more "game" mode settings you turn on, the less "simulation" it will appear. Cap runs straight simulation settings for the most part.
      Regarding the locks; the AGM snaps to the closest target to your designator. If you have your crosshairs on one of the trucks, AAA, or fuel supply vehicles, then it will snap to that instead of the MBT. I hit \ and then F1, F1, F4 to send my wingman after the ZSU's while I locked the other targets. The TV mode (color instead of B/W) is harder to spot them, but make sure you hit the + sign to zoom in on the targeting system. Also make sure you are trimmed and wings level while targeting so it isn't panning to the side with the aircraft while you are trying to lock. Other than if you can't find your targets, you can go into gameplay and turn on the labels - brief so it underlines the targets for you. Using them starting out helps you find them in simulation modes as you get better. Beyond that, I can't think of anything else to recommend.

  • @phased-arraych.9150
    @phased-arraych.9150 Рік тому +1

    I dare say the Maverick has always been the A-10’a primary weapon, not the GAU-8

  • @GeneticResearch
    @GeneticResearch 2 роки тому +1

    Zoom in and out aswell target lock not work with the A-10A and any of the AGM-65D missiles. Tryed out same buttons as you show with my HOTAS aswell the keybord and rebind. With the SU 25 i have no problems with it.

  • @JonM-ts7os
    @JonM-ts7os 11 місяців тому

    Trying to find a real target and not a bush or a building with the Mavericks is too challenging its pretty stupid so Ive bought the tank killer version, looks more promising for targetting.

  • @JamesWasThere
    @JamesWasThere 3 роки тому +2

    Those of you starting out in DCS don't give up train train train this isn't Ace Combat. This game demands patience.

    • @drewt9551
      @drewt9551 3 роки тому

      how do you make the little tv zoom in

  • @alheeley
    @alheeley 2 роки тому +1

    I know this video is quite old now but is ther any control over tv sensor brightness in the old A-10A as I cant make out diddly squat on mine when trying to find ground targets for the IR-mavs?

  • @aidanlusher
    @aidanlusher 2 роки тому +1

    Sitting here in 2021 getting PTSD when he says 'Delta variant'

  • @henryluebberstedt7819
    @henryluebberstedt7819 7 місяців тому

    When you talk about "miles" do you mean US land miles or nautical miles? Flying in knots i guess nautical.

  • @Trakkar
    @Trakkar 5 років тому +2

    Hi Cap! Hope you are doing extremely well. I just joined in on the DCS fun and must say: Thanks a ton for the tutorials, helped me out a lot.
    But, as you can imagine, I've got a question. Is there a way, to disable the "lock on" ability to buildings?
    I've got a mission, where I need to kill some tanks but the lock on always snaps to the buildings next to them and not to the tanks. Anything I can do there?

    • @grimreapers
      @grimreapers  5 років тому +2

      How strange. I read through the manual recently, and I didn't see anything of use there. All I can suggest is to use IR seeker mavericks which should in theory at least be able to distinguish between vics and buildings pretty easily.

    • @Trakkar
      @Trakkar 5 років тому

      @@grimreapers Thanks for the response. Don't really know what happened there, so I can't give a clue. I've seen that some times the tank spawns inside the building, maybe that's what's causing the issue.
      I managed to finish the mission with cluster bombs. That helped as well :D

  • @Минсок_Киёнович_Канъ
    @Минсок_Киёнович_Канъ 10 місяців тому

    I have two AGM-65Ds and the HUD shows "/2", but when I fire one shot, the TV turns off and the HUD shows "AGM-65D/1", and I have to press the D key to select AGM-65D again to use the other one. How do I fix this problem?

  • @axelmallet1957
    @axelmallet1957 3 роки тому +3

    Amazing video, you helped me a lot with this game but I still have a problem: I can lock the target(s) but I can't fire the missiles. I have checked and changed my controls multiple time but it still doesn't work... Can anybody help me pls?

    • @axelmallet1957
      @axelmallet1957 3 роки тому +1

      Sorry, I just figured out I have to hold the button down during 1 or 2 sec

    • @C4Bomber
      @C4Bomber 3 роки тому +1

      @@axelmallet1957 I was having the same problem... your comment helped me, so thank you!

    • @axelmallet1957
      @axelmallet1957 3 роки тому +1

      @@C4Bomber Well I'm glad to have been able to help you!

  • @avgeekproud9613
    @avgeekproud9613 Рік тому

    I looked at the settings for the A-10 A and couldn’t find anything about the Maverick am I looking in the wrong place?

  • @GlazSh0tJFK
    @GlazSh0tJFK 2 роки тому +1

    Hey I know the video is old but maybe someone can help. My agm65d is stuck in black hot and I hate it. How do I fix that?

  • @snazzymcnazmy
    @snazzymcnazmy 2 роки тому

    Getting a target lock with the a10 is so much easier than the frogfoot

    • @MeatBeatElite
      @MeatBeatElite Рік тому

      bro what are you on to say that? a10a agms are so annoying to aim. frogfoot wins ez

    • @snazzymcnazmy
      @snazzymcnazmy Рік тому

      @@MeatBeatElite it's easy for me, I once locked a helicopter mid air

  • @williamleadbetter9686
    @williamleadbetter9686 Рік тому

    what's the best way in the dumbed down lock on version to fire and hit target from max range. I keep getting clobbered at close range

  • @KarmaNagitashe
    @KarmaNagitashe 2 роки тому +1

    What buttons for the little camera so i can move it

    • @grimreapers
      @grimreapers  2 роки тому +2

      I can't remember but should be in here: ua-cam.com/video/R7pwRz-avvI/v-deo.html

    • @KarmaNagitashe
      @KarmaNagitashe 2 роки тому

      @@grimreapers thxs bro

  • @detlef3377
    @detlef3377 3 роки тому +2

    If i try to shoot my rockets min gadling shoots

    • @Thunderbird324-uk9ip
      @Thunderbird324-uk9ip 3 роки тому

      Alt + Space and also u have to either have your missiles on AA or you slew them to your target with lock on just got mines today and I'm doing fairly good except for the pulling up part before I kamikaze the targets

  • @darthjimmi1481
    @darthjimmi1481 5 років тому +1

    Tried attacking a ship with missiles....
    Stupid f*cking mav wouldnt lock on to anything and i died to AAA.
    Google is no help since everyone talks about the a-10C rather than the a-10A so i cant find a fucking answer.
    Im fucking livid if you couldnt tell....

  • @BlackThrasherrr
    @BlackThrasherrr Рік тому

    Does anyone else find it frustrating that the target reticle automatically recenters itself after firing? i would like to be able to fire at a target and then just slew over to the target next to it and fire again

    • @hippoace
      @hippoace Рік тому

      because it is using the missile sensor...once fired it will move on to the next missile...

  • @MRSMITHENTOP
    @MRSMITHENTOP 3 роки тому

    My a10 just stalls over n over

  • @MRSMITHENTOP
    @MRSMITHENTOP 3 роки тому

    So ur a10 a just doesn’t stall

  • @edog379
    @edog379 3 роки тому +1

    How do you get it so all the buttons and switches are working? In my dcs all the buttons and switches are kinda of blurry and I don’t have a cross hair so I can’t click on them. Thanks

    • @WarthogXYZ
      @WarthogXYZ 3 роки тому +1

      idk if you have figured it out yet but the A-10A is a low fidelity model so the buttons in the cockpit don't function. so you have to bind the functions to keybinds. and to increase the cockpits textures go to graphics and increase the texture setting. oh and to enable your cursor its alt+c

  • @moonstriker1377
    @moonstriker1377 3 роки тому +1

    Hi, how did u get the armament screen to pop up?? Is it a mod? thx!

    • @grimreapers
      @grimreapers  3 роки тому +2

      ua-cam.com/video/U39YrPnjkLM/v-deo.html

    • @moonstriker1377
      @moonstriker1377 3 роки тому

      @@grimreapers Thank u! Your vids are awesome! Make learning to fly in dcs much easier!

  • @thetreen00b
    @thetreen00b 2 роки тому

    the a-10a doesn't have a clickable cockpit is this a mod?

  • @justinhubbard8726
    @justinhubbard8726 4 роки тому

    how do you pull up that weapon menu at the start of the vid

    • @djkyte5400
      @djkyte5400 4 роки тому +3

      by default it's: left alt + apostrophe. (the key to the left of the backslash). Hope this helps, my English ain't great.

    • @dnt_alert5806
      @dnt_alert5806 3 роки тому

      Go into your keybind settings and search “communication menu” and set it to a key you aren’t using. I set it to the 9 key. Then press f8 to open the ground crew menu, and press f1 to select rearm and refuel.

  • @hendrix6395
    @hendrix6395 5 років тому

    At 2:46 - how did you switched in the ir mode?

    • @Fizzer99
      @Fizzer99 4 роки тому +3

      He changed to a different weapon, from optical maverick to IR maverick by pressing D.

    • @hendrix6395
      @hendrix6395 4 роки тому +1

      @@Fizzer99 i got it last week but ty

    • @Fizzer99
      @Fizzer99 4 роки тому +1

      @@hendrix6395 All good, In case others wanted to know.

  • @taipan185
    @taipan185 5 років тому +3

    Whats the deal with the screen whiting out in IR mode. I thought at first it may be because I was looking into the sky but that wasnt the case.