Fimi TX10 Controller - How to look inside - No.7
Вставка
- Опубліковано 3 жов 2024
- The Fimi TX10 Controller - An inside look. How to get inside for a look.
Things are always easier to take apart than put back together. At least there were no extras left over.
The only tough spot is aligning the fan body upon re-assembly. Also.. the 2 knobs on the front.. be careful.. they are only press on fit. They can pop off.
There was a noise issue with the fan but as the fan body has no mounting system, it can be difficult to position it correctly. Sorry.. trial and error here is the only answer I could figure out. I did mention this small design flaw to Fimi.
*****
I don't do any affiliate links and am not sponsored by anyone.
Please consider a Donation:
www.youtube.co...
Thank You
Stay Safe
/ gorillamansgarage
#TX10 #FIMI #X8SE #TAKEAPART
Very good.....thank for sharing
Great news, slow and easy does the trick
Thanks .. There is so much potential for this unit.
That's my type of view over RC stuff :) Any chance to show us the "megaphone" module from the inside? I would really appreciate it. Also, are there any valuable apps for the TX10 remote? Thank you.
a) sorry I dont have the V2 model b) the only app I like is the Du-Recorder screen recorder app.
*Excelente !!* 👌👌👍
Acabo de comprarlo.
Me envían el *TX10-A.* Cual es la diferencia entre estos dos modelos ?
They stopped making the TX10 because they stopped making the X8SE 2022. You can still get it somewhere I am sure.. but not from Fimi. The TX10 operates only the X8SE 2022... The TX10A operates the X8 Pro (Only) but is supposed to work with he X8SE 2022 V2 later on. The TX10A.. has No Simm Card, No 4G module, but operates on Android 12 (which is better).
@@GorillamansGarage Thanks for the information.
I have bought 1 FIMI X8 V1, 1 FIMI X8 SE 2020 and now a FIMI X8 SE 2022 V2.
I think I will put the other previous models up for sale, so that someone else can enjoy them.
wondering if the sticks are resistive or hall effect, def looked resistive, and seem replaceable, but its not like halls are the modern way to go
I dont really know.. but I will ask. Thanks
Hi GM, so Fimi moved the crooked horizon to the TX10 fan? vbg Thanks for the video.
🤣 Good one!! 😂 Fimi later, sent me a short video of the engineer ripping the controller apart. Boy, they done handle these things with any kind of gentleness. And I noticed the interior wiring .. the way it was wrapped and he paths they took were very different than mine. So again... I suspect a multitude of people assemble their products in a multitude of ways.. hence the abundance of issues at our end. At least now I know I can replace the fan if needed and in all honesty.. I doubt the thing even needs a fan.
Do you think Fimi will ever make the TX 10 compatible with the Fimi mini?
I don't think so. They have not updated it for some time. I have a feeling that their future lies elsewhere.
Appreciate you showing how it's held together. What do you use that square of velcro for? Fimi says tge 4800mAh 2nd battery is not available yet, same with the RX10 accessory module. Tried any other software on it? I was planning to at least try UAV Forecast, Airdata and maybe LA few others
I think the little square of Velcro was to hold an external mic transceiver . But I dont use it now.
@GorillamansGarage Yep, sounds about right. What are you using as a mic currently? Wireless? I have several good Wireless Mics, but the transceiver would have to stick out the top, keeping the rubber cover/seal open. NOT ideal 😕 open to suggestions.
My aircraft is the V2, I was curious if the TOF sensors + optical flow held a more stable hover. Short answer? Absolutely works better than ultrasound for stable, hover. It does not wander. Not sure if it was a one time occurrence (damn well BETTER BE), but a quick "left stick down" land command and it went down... whilst going horizontally 3 or more feet, nearly colliding with my sons car. Beyond any control, executing a landing, THAT could have gone sideways, just like the aircraft 😆
Fimi doesn't cut power to the motors in a fast "hover rpm -> idle rpm the way just about EVERYONE ELSE DOES 🙄 -I'd love to know why, since its why precision landings get RIGHT THERE above the landing spot, then prop wash sends it randomly a half meter sideways when touching down. 😉 -to be fair, they've only been developing this aircraft 5 years or so. You can't rush greatness.
QUESTION: Has Fimi commented at all on why they left the Panorama shots in their other pants? Curious. They had stitching issues, so maybe pulled them to fix... but again, 5 years. music.ua-cam.com/video/3DUau6wFMiI/v-deo.html&feature=share
@@BlairAir : I like the hard wired lavaliere 5' mic best. But the onboard mic is OK if you are close. I use a mic sometimes but usually I am filming with another source so I just use the TX10 audio for sync purposes.
Is it worth 400 bucks?
I thought it was $299?.. considering the dji ones.. then 👍 yes. 😃
My vids are numbered. From day one I was impressed. Fimi insists its only the beginning 😇
You can also get it cheaper in some places with coupons, discounts etc.
@@GorillamansGarage I only have the mini so I don't think i need one
@@tdrdronesebikesandscooters8377 true 👍
Hello friend, how are you, my TX10a control is locking the screen every half a second, can you tell me why?
Now the recordings that are saved in the gallery do not have the delay, it is normal, only when viewing the screen it gets stuck.
Here is a video from another user with the same problem as mine.
ua-cam.com/video/XHQ13Z6PnW0/v-deo.html
Is it a range issue? Do you have the WiFi turned on? Did you try and load extra software? Did you have issues with an update procedure? Are you in a high electromagnetic frequency range? Are you running the correct App? Did you drop it?... Sorry... but so many questions..