Xhorse VVDI key tool max, mini prog, mini obd Toyota sequoia my experience not so great..

I know this typically isn’t the type of content I have on my channel but I just wanted to share my experience with Xhorse products again would I recommend them no they don’t do what they meant to or either I have the worst luck. hope this video helps out those of us that are frustrated with their products because I know there’s quite a few out there.

[@MrNiceGuy94]

Get one of their vvdi super chips and with the key tool max start to clone the key. First put the original key into the key tool max's slot then the super chip and it will work. They only support certain chips.
Hope it helped 😉

[@harryyubank]

I think you have your info a little bit wrong, that the key says its clonable doesnt mean you can write on it, it means you can get the info out of it and put into a vvdi super chip; you already have 2 keys with chips 4D67, connect the mini obd tool to the truck obd port, go into immo and go all the key lost and follow the steps,

[@brianrerko9659]

You cannot copy an original factory key on x horse if you have one of their super chips program it to the super chip you can get key heads that you can put the super chip in and snap the X-Force blades into the the head or I have used a hot tool to cement chip above head of keyblade will work perfectly

[@bigperm831Salinas]

Trouble shooting 🙃

[@brianrerko9659]

I'm no means a professional yet I've been a mechanic for about 20 years and I'm transitioning into doing keys I'm just letting you know you should be very very careful the tool that you have is very powerful and if you do not know how to use it properly you can actually damage vehicles

[@MrLukerowell]

You can only clone to superchip or compatible chip. All chips are not compatible with Xhorse. I have done dozens of those keys with no problems with correct chip.

[@betoskickz]

Hey thank you for the info.

[@nicholashenry5015]

You must put a vvdi super chip only to clone