I dont know anything about this specific exact device but usually a stirling engine uses 2 cylinders to operate anyways. A loose one and a tight one. But yeah i agree a different engine config would balance better.
Celý komplet je profesionálne spravený aj statív je masívny, na rozdiel od iných vydelí na UA-cam nemáte na to celý plán okotovanie v mm a materiály Ďakujem
1:33 what about sticking a small solar panel there to get MORE ENERGY?) And it seems to me that it will be slightly cooled due to the working engine and, accordingly, heat removal (low temperature is important for the efficiency of solar panels), am I right?
@@19marco82 how about connectring diesel nozzle and injecting water with external help at least for the begining- to see what happens, and if the idea is really good and helps convert heat in to expansion efficiently then you can power-connect nozzles to your stirling engine system?
@@19marco82 look up the one in the museum in France. It was at a worlds fair in the late 1800s and was used to power a printer. It was the size of a 5 gal bucket.
It does not have to be calculating the position of the sun all the time, that consumes energy, you just have to calculate it every 5 or 10 minutes, that drastically reduces the amount of energy used when aiming at the sun.
Not really. Just to clarify, it's CALCULATING all the item. I assume what you meant was adjusting the position all the time. In any case, moving the reflector assembly takes a trivial amount of energy. Besides, if you energize the tracking motor for a quarter second 10 times or for 2.5 seconds once, what's the difference? Moreover, you need to hit a pretty small target. This is a beautiful tracking system. (From somebody who's built one. ua-cam.com/video/yS9tEpHysvQ/v-deo.html)
this is the future - i've also seen the infinia power dishes that were already installed in some locations. i do wonder if changing the focal point received to an evacuated tube would improve the performance...
the future is geothermal energy, will last for 2 billion years for all the people living on our planet. dig a 5km hole under your house and you can have it
Excellent, always in these videos I have the same question. How much electrical energy or work in an hour is the equipment capable of producing? This aspect of the experience is always missing. Thanks for the video. Greetings
Able to scale it up, so the mirror is 2 or 3 meters across? Bigger stirling engine? Able to tie in to an existing power system? Something like that, I would interested to purchase.
I think one way to scale this up is by using single axis parabolic solar concentrators to heat up water, oil or some other fluid which can then be used to feed a larger engine. Temps are probably going to be lower though. Or have a central tower with the engine surrounded by a field of mirrors, you how it's done with a solar power tower.
Está tão bem feito que parece que foi comprado em loja especializada. Mas gerar 1 watts é deveras decepcionante. Acho que com vapor renderia mais energia. Não parece ser o objetivo. Funciona !! Congratulatios !!!
I am trying something very similar with Fresnel lens. Its light weight frame will be easy on tracking sun. Its a solar concentrator too where cheaper lenses are bringing in 90 percent of light.. And would like to talk to you if possible about your project.
This technology was actually commission in 2010, and it was capable of generating 1 megawatt of power, this was later abandoned due to environmental concerns.
" environment " concern ! Do they realize that the photovoltaic panel industry and semiconductor industries are polluting and dangerous to the environment ?
the principle is there, but the engine shakes the mirror. The wheel is tiny, so it would not produce much momentum to do very much.. Use a bigger dish, draw the heat away from the dish, heating oil and power a bigger engine.
19marco82 that might be a problem, but my dad made a barbecue and painted black he used special paint fot extreme heat but idk the temperature and I don't remember what exactly he used go to a shop that sells this kind of things you‘ll find one
Yes, just buy paint made for boiler plate or stoves. I have been thinking about making one similar and in addition to painting it black, incorporate a glass globe to make it even hotter by trapping the heat around the element.
I’ve seen tracking done brilliantly with tiny solar panels hidden just behind the dish. As they are exposed to the sun they power the motors directly, so it reorientates automatically with no constant power draw.
Great!! It perfect use solar energy. Im very interests in solar generator with stirling engine. Is it more efficient than solar panel generator?? About generating electricity, or other side...
Tracks the sun on two axes? East to west throughout the day and north to south throughout the year? Someone can explain what happened to the infiniaCorp company which provided a parabolic disc with stirling for electricity generation up to 3kw? Today I seek information and have no news? Something dark happened!
ranyerebrc look. This machine output 10v ac 125ma. Can you imagine a stirling and a bowl for 3kw? about the axes... Think It a little and if you dont get It, watch the complete video because its well detailed.
1-كم وصلت درجة الحرارة الى البؤرة ؟ 2- ما هو مقدار الطاقة الكهربائية المستخرجة من الجهاز ؟ 3- كلفة الجهاز ؟ 4- هل الصحن الشمسي عبارة عن طبقة من الألمنيوم؟
dear sir 19marco82 i want to ask about bigger stirling for more output elec. power in the range of 0.25 kW for a graduation project where can i buy it ?
this some james bond villian looking stuff, and i love it :D
Very good. I love it. Solar panels have maximum 20 years life time but this may have 120 years, moreover it has not chemical dependency.
It depends on whatever gas you fill it with, from what I know hydrogen gas works well. it's a closed system though so no gas is released...I think.
Moving parts might make it less reliable.
Or slave labor to extract the materials
these are much more efficient than the best solar cells too.
am not sure the mirror would last 120 years.
A two cylinder might run smoother. And I might suggest a copper heat sink to store excess heat. Very nice design and nice finished workmanship.
I dont know anything about this specific exact device but usually a stirling engine uses 2 cylinders to operate anyways. A loose one and a tight one.
But yeah i agree a different engine config would balance better.
that is one elegant machine you've made. Kudos
Charles M , thank you
Looks amazing it could be a great source of emergency power for a radio or trickle charge a backup battery bank
True
That's beautiful,
you should be proud 😊
Thank you
Very beautiful. I can watch it run All day long! 😍
Nice job one of the forgotten power generation ideas.
My version is slightly different but the principal is the same .
Celý komplet je profesionálne spravený aj statív je masívny, na rozdiel od iných vydelí na UA-cam nemáte na to celý plán okotovanie v mm a materiály Ďakujem
Added a mechanism associated with shape memory materials for automatic start.
I build it on my own.
wow. Any updates?
Hi, no updates so far. I will start working on it next year and post some new videos.
Good job!!!. Mirror- what is that? . Im looking for reflection pararabolic mirror...
greenpowerscience sell good ones, and they also show how to make your own. I see both solutions in the suggestions at the right.
how much power does it make? also is the engine oiled? cool set up.
could enclose in a vacuumed container to avoid noise and better performance
Use helium as the medium you will get significant improvement in energy conversion
Yes, two axis, every day.
Best regards.
Add a heat sync to it. Will allow more torque from added pressure.
excellent project sir, thanks for the video ;-)
Is this something you've built 100% by yourself? Any plans to show how you've done it, or do you have this patented?
I used no servos, just two small 3V motors with a self made gear.
1:33 what about sticking a small solar panel there to get MORE ENERGY?) And it seems to me that it will be slightly cooled due to the working engine and, accordingly, heat removal (low temperature is important for the efficiency of solar panels), am I right?
Great idea! How about adding a drop of water for each cycle? Combining Solar Stirling and Steam
Good idea, at the moment I am looking for a new engine, Beta typ would be fine.
@@19marco82 how about connectring diesel nozzle and injecting water with external help at least for the begining- to see what happens, and if the idea is really good and helps convert heat in to expansion efficiently then you can power-connect nozzles to your stirling engine system?
@@19marco82 look up the one in the museum in France. It was at a worlds fair in the late 1800s and was used to power a printer. It was the size of a 5 gal bucket.
It does not have to be calculating the position of the sun all the time, that consumes energy, you just have to calculate it every 5 or 10 minutes, that drastically reduces the amount of energy used when aiming at the sun.
Not really. Just to clarify, it's CALCULATING all the item. I assume what you meant was adjusting the position all the time. In any case, moving the reflector assembly takes a trivial amount of energy. Besides, if you energize the tracking motor for a quarter second 10 times or for 2.5 seconds once, what's the difference? Moreover, you need to hit a pretty small target. This is a beautiful tracking system. (From somebody who's built one. ua-cam.com/video/yS9tEpHysvQ/v-deo.html)
I wonder if it's possible to use your arm as a heat source to power a tiny stirling engine on a watch
this is the future - i've also seen the infinia power dishes that were already installed in some locations.
i do wonder if changing the focal point received to an evacuated tube would improve the performance...
the future is geothermal energy, will last for 2 billion years for all the people living on our planet. dig a 5km hole under your house and you can have it
Very nice, excelent peformance , congratulations
Hey! How much energy did it produce?
How much energy u able to generate on it??
How does it work at night?
Excellent, always in these videos I have the same question. How much electrical energy or work in an hour is the equipment capable of producing? This aspect of the experience is always missing. Thanks for the video. Greetings
Always I have the same answer. Please look in the description. Its all mentioned there.
@@19marco82 10 volt/h is that the answer?
@@mehiri yes, 10 Volt
@@19marco82 are you supplying those? and from where?
@@mehiri volt per hour is not a measurement🤣
why not scale this to a size to power a home? is it possible?
Is the Stirling pressurized? You get more torque and there for more power by same RPM with more pressure then atmospheric in the Stirling motor
I just saw a 16 cylinder model today online. It ran very smoothly and quietly.
Able to scale it up, so the mirror is 2 or 3 meters across? Bigger stirling engine? Able to tie in to an existing power system? Something like that, I would interested to purchase.
I think one way to scale this up is by using single axis parabolic solar concentrators to heat up water, oil or some other fluid which can then be used to feed a larger engine. Temps are probably going to be lower though. Or have a central tower with the engine surrounded by a field of mirrors, you how it's done with a solar power tower.
Any idea on the efficiency? How many watts of power vs the power from the sun hitting the mirror? And how does it compare to solar?
Its vanguard solar design from 1984.
Está tão bem feito que parece que foi comprado em loja especializada. Mas gerar 1 watts é deveras decepcionante. Acho que com vapor renderia mais energia. Não parece ser o objetivo. Funciona !! Congratulatios !!!
Sterling engine converts energy more efficiently although yields less dense energy.
😂😂c'est bon pour effrayer les oiseaux et m'empêcher de dormir🎉🎉
only 10 v? thats very low right? not much for house appliances...
We are on a project at school and we like to know where do you find this dish (miror) if you can help us ?
www.greenpowerscience.com
Where can I buy a model like this?
Pense em um negócio bonito. Muito bem feito deve ter dado o maior trabalhão.
I am trying something very similar with Fresnel lens. Its light weight frame will be easy on tracking sun. Its a solar concentrator too where cheaper lenses are bringing in 90 percent of light.. And would like to talk to you if possible about your project.
This technology was actually commission in 2010, and it was capable of generating 1 megawatt of power, this was later abandoned due to environmental concerns.
" environment " concern ! Do they realize that the photovoltaic panel industry and semiconductor industries are polluting and dangerous to the environment ?
what you did for vibration & how much energy you get......just put next to a musician they sleep in the day
the principle is there, but the engine shakes the mirror. The wheel is tiny, so it would not produce much momentum to do very much.. Use a bigger dish, draw the heat away from the dish, heating oil and power a bigger engine.
Why is it generating AC rather than DC?
where do i buy stirling?
painting the point where the light hits will make it absorb more heat
ELLINARAS 456 , Any suggestions for high temperature coating? 350 degree and above.
19marco82 that might be a problem, but my dad made a barbecue and painted black he used special paint fot extreme heat but idk the temperature and I don't remember what exactly he used go to a shop that sells this kind of things you‘ll find one
for high temperature coating you have to use an high heat coating spray. I used for my rocket stove.
Yes, just buy paint made for boiler plate or stoves. I have been thinking about making one similar and in addition to painting it black, incorporate a glass globe to make it even hotter by trapping the heat around the element.
19marco82 black mate spray for motorbike engines. While you dont clean It with a high pressure water system, It last years
Are panels cheaper? Or can this compensate with a large enough area?
i wonder how big would you have to build it so a generator connected to the engine produces more power than the autotracking requires... :D
It looks self-contained to me, I think he is charging the system then using the stored power to move the dish
I’ve seen tracking done brilliantly with tiny solar panels hidden just behind the dish. As they are exposed to the sun they power the motors directly, so it reorientates automatically with no constant power draw.
Did you make this?????? 🤯
It looks like one of my 3d prints for wifi.
Is there stepper motor control?
Great!! It perfect use solar energy. Im very interests in solar generator with stirling engine. Is it more efficient than solar panel generator?? About generating electricity, or other side...
It is possible to be more efficient than solar panels, but the thing is that the sterling engine must be optimized.
Stirling engines have the highest fuel efficiency, dunno about light efficiency.
good work brother..brilliant...
amazing garden, nice video, awesome built...is it 0.125 Amps or 1.25 Amps ?
That's what I was thinking, it must be more than 1,25W?
@@0isay that would be very disappoininting
I need to build a solar Stirling engine circa 20-30 kW. Is it technically possible? What is approximate cost of it? I will use it for home purposes.
Yes, 20.000€ - 30.000€
This contraption looks so Sci Fi
can you tell me all the components did you use to make this please
How much energy we can get from this engine?
That is one hell of a setup!
I am impressed!
Marcin Marecki, thank you.
whats the torque like and how much electricity can you make?
Have plans on this?
Thumbs up. What is the voltage output?
how did you do the dish?
Why sterling engine why not just steam engine.. Boil water and move heavy load.. Better outcome?
You can sell it online as well.......
how we can build it ?
Tracks the sun on two axes?
East to west throughout the day and north to south throughout the year?
Someone can explain what happened to the infiniaCorp company which provided a parabolic disc with stirling for electricity generation up to 3kw?
Today I seek information and have no news?
Something dark happened!
ranyerebrc look. This machine output 10v ac 125ma. Can you imagine a stirling and a bowl for 3kw? about the axes... Think It a little and if you dont get It, watch the complete video because its well detailed.
Cool, if it was like 4 times bigger with a bunch of solar panels, probably get the same results in solid state though.
Awesome, does your sterling engine use air for its medium?
Yes it does.
Could you use a Stirling engine to make hot water?
Alexandru Popescu, yes, but there are better solutions.
What is the power output as apposed to a solar panel?
LEO, you can not compare it, this engine setup is only for demonstration. Very small power output.
@@19marco82 What are you getting out of it?
I looks really cool.
I've heard of them being used on submarines (obviously minus the reflector 😂)
LEO, Output is 10 V and 0,125A
MARCO CAN YOU GIVE ME SOME DETAIL ABOUT THE ENGINE
SIRSARAY20 , sorry I have only a few Parts for which I made some drawings.
1-كم وصلت درجة الحرارة الى البؤرة ؟
2- ما هو مقدار الطاقة الكهربائية المستخرجة من الجهاز ؟
3- كلفة الجهاز ؟
4- هل الصحن الشمسي عبارة عن طبقة من الألمنيوم؟
How this engine doesn't burn from concentrated sun heat?
Any idea what type of electric current it could produce?
this thing doesn't produce anything, but professionaly made concentrated solar panel designs produce 25% more than a solar panel.
Great accomplishment, very well done. Do you also produce electricity?
Thank you, it produces Energy, however not very much.
little bit noisy isn't it? i think your neighbors does not want a construction worker full day :)) but built is nice and neat
มัน สวย งามมาก fc
how many kWh does it produce?
Quality job !! well done !!
dear sir 19marco82
i want to ask about bigger stirling for more output elec. power
in the range of 0.25 kW for a graduation project
where can i buy it ?
If you get an answer let me know!
where to buy something like that but much more powerfull?
At a lathe
I want to buy.....how????
awesome dude, where did you buy that mirror from ?
www.greenpowerscience.com
hot air zeppelin could be non stop in the air
WHAT IS THE POWER OUTPUT
just over 1 watt, says so in the description.
@@cestarianinhabitant5898 what ? you scare the bird ,squirrel ,+ don't let me sleep for 1 watt ,the oil company is out the door ,i think i answer it
Where did you get this or how did you make this?
cost per watt?
Did you machine all of those parts yourself?
Hello sir...
Awesome work..
Sir, are you willing to sell..?
If yes please reply
No Sir, I am sorry. Only like that what price would you suggest
is that alpha type ?
and whats that Swept volume?
I want to make it as my college project...can you help me clear out some of my concepts please
What if you use water cooled by the ground to cool the "cold" cylinder, (either geothermal or tap). This would increase the temperature differential
the output is just 1.25 watt
really? that is too little...
VORREI COMPRARLO
verry verry good
Is it too loud or did you use parabolic microphone?
It is very loud 😀
Genius !
Fucking awesome.
is it self starting.