# Besenstiel... "Einhell" würde mich interessieren.... preislich um die 150€... PS: Du machst das super, immer wieder sehr informativ und es macht echt fun Dir zu zuschauen... bitte genau so weiter machen :)
Ok you got my attention! Little fancy pants buggers. I'm engrossed with your skills. Jesus would have been proud!😃 Beautiful work. I think the one that got me was the wall shelf that turned into a table. Wish I were a carpenter. I'm intrigued. Thank you for sharing your skill and ideas. NOW WHAT?! Subscribing on UA-cam TV.
Bellissima opera, lavoro anch'io con il legno. Una persona ha chiesto che senso ha tutto quel lavoro, e che l'attrezzatura costa più di un tavolo. I lavori fatti da soli artigianalmente non hanno prezzo, la soddisfazione di creare qualcosa vale molto di più del costo dell'attrezzatura.
One every payday for hand tools, other power tools every other payday or so and eventually you got a shop, used is a good place to start, and often you find tools they used on a Reno job and it's not even broke in yet, grab those deals up, lots of elderly were taken in recent years, maybe sounds bad but if there are estate sales get on those too, the old guy who had them would rather they get out to use than discarded. Tools will be important in a few years as the big flu fall out fully hits us. Fixing and building will be very important skillz. You can do it 👍
سپاس فراوان 🙏 🌱 🌺 ممکنه برخی از کارها مثل لقمه رو دور سر گرداندن باشه ، یا دوباره کاری ، یا بیهوده کاری یا آلوده کردن محیط زیست باشه مثل ساخت منقل . اما در کل بسيار زیاد میشه از مهارت های شما در امور مختلف در کارهای مختلف استفاده کرد . جزو ویدیو های ماندگار است و بعنوان مرجع میشه بهش نگاه کرد ❤❤❤🎉
All very nice and also practical things, BUT: YOU DO NOT POUR A FIRE ACCELERATOR INTO AN OPEN FIRE!!! There are enough videos on UA-cam that show you what happens if you are unlucky.
Caro amigo, suas ideias são muito boas, você teria o projeto da estante que vira uma mesa de escritório? Poderia fornecer? Muito obrigado Robinson, Brasil.
Hey guys! Appreciate your tips and teachings. But we don't have some of those usefull tools here in Brazil, specially the sanding disks used in mostly of the videos. Could you please share links of some tool stores where I can find and order them? Thanks for now. Greetings.
Excelentes trabajos, se aprende mucho. Consulta: ¿cómo se llama el proceso que aparece en un frasco a los 31:30 minutos, para qué sirve? Gracias, felicitaciones, siguiendo.
Это вакуумная стабилизация древесины. Из древесных поры вытесняется воздух и пустоты заполняются разными полимерами. Такая древесина приобретает высокую плотность, твердость и прочность, устойчивость к воздействию высоких температур и температурным колебаниям, стойкость к повышенной влажности или сухости воздуха, невосприимчивость к ультрафиолетовому спектру, непроницаемость для любых едких веществ, масел, органических растворителей. И самое главное - стабилизированная древесина, это очень красивый материал. Esta es una estabilización al vacío de la madera. El aire es forzado a salir de los poros de la madera y los huecos se llenan con diferentes polímeros. Tal madera adquiere alta densidad, dureza y resistencia, resistencia a altas temperaturas y fluctuaciones de temperatura, resistencia a alta humedad o aire seco, inmunidad al espectro ultravioleta, impermeabilidad a cualquier sustancia cáustica, aceites, solventes orgánicos. Y lo más importante, la madera estabilizada es un material muy bonito.
Excelente, claro es algo que la naturaleza lo hace por ejemplo en los lagos aquí en Ushuaia, esas maderas blancas y secas, excelentes para algunos trabajos que se puede narrar desde dónde uno recogió la madera. Muchas gracias, buen detalle en enseñar. Abrazo desde el Sur de Sures.
As an old timer, who learned to make furniture by hand in the 70s, it is very satisfying to watch someone hand crafting without CNC. Great work!
Да к чему всё это.Вон пошол и купил.Тут инструмет дороже обойдётся.
My eyes are crying out of beauty but my ears are bleading.
How many people managed to stay in front of this video without cutting the sound of ?
The music needs improvement
Thank God for the volume control
Бравоо, Дай Бог вам мужчины работающие за кадром здоровья, счастья в личной жизни, Благополучия вашим семьям.
He’s good. Deserves the credit for that
Jack-of-all-trades. Master Craftsman, well done.
Super clever table/shelf project. Enjoyed your build presentation.
And beautiful restoration of the razor.
I love how I learn something new every time I see you do something on your channel…I’ve never seen anyone bend wood like that….that is TRUE SKILL….
first time seen that too how its made
Lucky blessed woman who has this man
Thank you.
This is beautiful art, I love it. Thank you for sharing 🌹
That desk/shelf is really cool, nice job guys! 😮
Are there any building plans for these projects?
C'est vraiment magnifique superbe Merci de transmettre votre savoir
I just liked the video twice 👍 👍
Did anyone notice his handmade tools for working these projects? This guy is off the charts. 👍🏼
The ring table would look great with an epoxy resin between the rings.
Very nice ❤❤
Спасибо! Очень приятно! Я уважаю и ценюикачество и красоту❤❤❤
Alhamdulillah you are really a blessed one.Allah Subhan taalah blessed you with real talents.Mrs Shaukat from Pakistan 🇵🇰 Asia.
Этому надо учиться, это нужно и для того чтобы не потерять , а сохранить.
Definitely most interesting
В финале классные фокусы с древесиной и профильной трубой! Браво! 👍👍👍
Great work, man.
Nice enjineering job wark
just simply , amazing and beautiful jobs. love any single thing you made or restore. wow. well done
Muy bonito lavamanos,, señor joven FELICIDADES 👍 SALUDOS
Incredible knowledge and skill.
Tutto SUPER 👍
Jerry asks Tom in one of the cartoons.
" IS THIS RIDE REALLY NECESSARY?" 😅😅😅😅
BRAVO !!!
MASTERS IN THEIR TRADE,,THEIR ART
wow, you are so skillful
The pine cone lamp was my favorite
Doctor DIY, where are you ?
Доктор Дью... где же выыыы ))
# Besenstiel... "Einhell" würde mich interessieren.... preislich um die 150€... PS: Du machst das super, immer wieder sehr informativ und es macht echt fun Dir zu zuschauen... bitte genau so weiter machen :)
That sink is TOTALLY COOL,!!
Your works so beautiful!❤❤❤
I like the wood work very good.cmc
Ok you got my attention! Little fancy pants buggers. I'm engrossed with your skills. Jesus would have been proud!😃 Beautiful work. I think the one that got me was the wall shelf that turned into a table. Wish I were a carpenter. I'm intrigued. Thank you for sharing your skill and ideas.
NOW WHAT?! Subscribing on UA-cam TV.
Amazing holy shoot
Muito show.
Parabéns...
Com um equipamento deste.
Meu sonho.
Faço muito trabalho com madeira.
Só com uma furadeira.
Tudo manual 😂😂😂😂
Amazing knife
Чувак красавчик без базара😮
Matka dała drewno z działki dla gołębi na gniazda a baranek boży kartę wędkarską. 😊
My mind must have already been blown.
Beautiful. Better hope that sink don't get blocked though.
Absolutely incredible and beautiful!
Супер. Опасное лезвие, полка топорик, столик для сменных геретов, в общем всё супер. Очень интересно. Спасибо
You really know how to play with your WooD bravo
thank
Bellissima opera, lavoro anch'io con il legno. Una persona ha chiesto che senso ha tutto quel lavoro, e che l'attrezzatura costa più di un tavolo. I lavori fatti da soli artigianalmente non hanno prezzo, la soddisfazione di creare qualcosa vale molto di più del costo dell'attrezzatura.
Молодчина! Руки золотые! И голова работает! Молодец!
What a beautiful wood craft!
Just because you can doesn’t mean you should
I seen this comment before watching, just gotta crazy feeling I’m better of not watching this 😂😂😂😂
@@ykthelabel3012❤❤❤❤❤❤❤❤❤❤
@ykthelabel3012
Хорошостроеш
Ы🎉
Loved the ax the best! You brought it back to life probably better than it was originally! 👍👍👍👏🏼👏🏼👏🏼😀💕🌸
The beat was just superb i tell you
Buenas que bn🎉
You are very good at your trade. I've learned a few things. Great job!
TOP JOP 👍🏽💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
Классная работа 5+
喜欢这个灯！
You’re a genius, your work is so beautiful. Also whoever your editor is is incredible don’t know if it’s you or not.
I totally agree!
Must be nice to have a whole factory floor full of tools. Anyone could make anything with all those toys
One every payday for hand tools, other power tools every other payday or so and eventually you got a shop, used is a good place to start, and often you find tools they used on a Reno job and it's not even broke in yet, grab those deals up, lots of elderly were taken in recent years, maybe sounds bad but if there are estate sales get on those too, the old guy who had them would rather they get out to use than discarded. Tools will be important in a few years as the big flu fall out fully hits us. Fixing and building will be very important skillz. You can do it 👍
Годнота!
I love the hatch/hammer tool….I wouldn’t mine finding one of them…how heavy is that one….
如果有配小說就更好了😂
سپاس فراوان 🙏 🌱 🌺 ممکنه برخی از کارها مثل لقمه رو دور سر گرداندن باشه ، یا دوباره کاری ، یا بیهوده کاری یا آلوده کردن محیط زیست باشه مثل ساخت منقل . اما در کل بسيار زیاد میشه از مهارت های شما در امور مختلف در کارهای مختلف استفاده کرد . جزو ویدیو های ماندگار است و بعنوان مرجع میشه بهش نگاه کرد ❤❤❤🎉
Fica todo mais fácil e lindo.
All very nice and also practical things, BUT: YOU DO NOT POUR A FIRE ACCELERATOR INTO AN OPEN FIRE!!! There are enough videos on UA-cam that show you what happens if you are unlucky.
What do you use to produce steam? Been wanting to build a steam tube. Love your videos brother.
water 🤣🤣🤣
Топор шедевральный
amazing.
BEL VIDEO.
SALUTI
SALVIO
👏👏👏👏👏👏👏👏
just crazy ideas 😊
The power tools used in this vid. are PROFESSIONAL QUALITY equipemnet that are NOT in the province of the average DIY worker!
Канистра покинула чат.😂😂😂😂😂😂😂😂😂😂
My mind is blown
1ST BUILD WAS SUPERB
EXCEPT FOR THE BASE OF THE TAP
Very good 👍 👏
Love the bowl; hate the fake scorched look.
thumbnail at 32:29
Nice work ...... but music.
The lath table needs a glass top!
Fascinating.
Would have been even better if the words "This is a ____________" had appeared on the screen.
Caro amigo, suas ideias são muito boas, você teria o projeto da estante que vira uma mesa de escritório? Poderia fornecer? Muito obrigado Robinson, Brasil.
Hey guys! Appreciate your tips and teachings. But we don't have some of those usefull tools here in Brazil, specially the sanding disks used in mostly of the videos. Could you please share links of some tool stores where I can find and order them? Thanks for now. Greetings.
34:05 шняга шняжная.
Изумительно, сперва испортит предметы, чтоб их "покрыла" ржавчина, потом с лёгкостью от неё избавляется.😂😂😂😂😂😂😂😂😂😂
Excelentes trabajos, se aprende mucho. Consulta: ¿cómo se llama el proceso que aparece en un frasco a los 31:30 minutos, para qué sirve? Gracias, felicitaciones, siguiendo.
Это вакуумная стабилизация древесины. Из древесных поры вытесняется воздух и пустоты заполняются разными полимерами. Такая древесина приобретает высокую плотность, твердость и прочность, устойчивость к воздействию высоких температур и температурным колебаниям, стойкость к повышенной влажности или сухости воздуха, невосприимчивость к ультрафиолетовому спектру, непроницаемость для любых едких веществ, масел, органических растворителей. И самое главное - стабилизированная древесина, это очень красивый материал.
Esta es una estabilización al vacío de la madera. El aire es forzado a salir de los poros de la madera y los huecos se llenan con diferentes polímeros. Tal madera adquiere alta densidad, dureza y resistencia, resistencia a altas temperaturas y fluctuaciones de temperatura, resistencia a alta humedad o aire seco, inmunidad al espectro ultravioleta, impermeabilidad a cualquier sustancia cáustica, aceites, solventes orgánicos. Y lo más importante, la madera estabilizada es un material muy bonito.
Excelente, claro es algo que la naturaleza lo hace por ejemplo en los lagos aquí en Ushuaia, esas maderas blancas y secas, excelentes para algunos trabajos que se puede narrar desde dónde uno recogió la madera. Muchas gracias, buen detalle en enseñar. Abrazo desde el Sur de Sures.
Perfeito`
I have never seen a toilet drain out of the back, only seen the ones that drain out the bottom
So tell us you’ve never left the USA without telling us.
Never found a good enough reason to leave@@lbjr777
En 40:00, cuales son las medidas de las partes que forman la caja. Gracias
Very nice BUT did you have to ruin that beautiful old plank to do it?
Is it still "DIY", when you need an industrial sized collection of woodworking machines and tools? Hmm...
Зачем наматывать уплотнительную ленту при монтаже гибкой подводки? Там торцевой вид уплотнения посредством прокладки.
Я не умею! У меня своя есть работа рукоделия!
👍
Guess they haven't found out about .50 ammo cans......
I love your hammer, 🤣🤣🤣