Thanks for the video. I built my table using your video in about 30 minutes. I used wood spray glue from 3M so I didn't have to wait for the other wood glue to cure. Much appreciated
If the wiring is new to you, get a little $5 power strip with a switch on the end. Plug the strip into the power supply, plug the router into the power strip, use the power strip switch to turn the router on and off. Your display of table dimensions is great!
I know that this is an older video, but I’ve always appreciated more down to Earth approaches to woodworking. It’s nice to see videos that are attainable for normal people to build and afford.
just watched a video of someone making a router table labelled as "easy" and it would've been impossible to build without a wide array of professional wood working tools. LOVE this video as a small time DIY person.
I wanted to say something smart ass about having thousands of dollars worth of woodworking tools but spends 20 bucks andmakes a router table but, damn it I just couldn't do it. This was a damn fine video. Interesting, clear speaking, no overly loud music, and to the point. Thank you sir, I will be using your video for my DIY table today!!
The rocker switch is good for quick "off" but also very easy on. It would add $8-$10 to the build but an actual E-Stop switch/button available from your favorite online retailer would be well worth it. Also, like others have mentioned...careful on those cross cuts with the miter gauge and fence...kickback is no joke.
Wow, dude, you are incredibly articulate. Informative, intelligent, and very to the point. This is an 11/10 video and you got a sub out of it. Most videos have that annoying 60s intro and they mumble with no real direction for the video like they did it last minute and this is a huge sigh of relief from me.
Great solution for dust collection when using it without a fence. Adding a fence to this basic design should be a simple process too. Nice cheap, simple approach. Thanks!
I am building this with a couple of simple modifications. Mine is 18" x 30", (Had a laminate drop), and since my router depth adjustment is not like the 892 porter cable, I put a 2" x 4" strut across the front and back, and added a piano hinge on the back so I could just lift the top to make my adjustments, or change the bits. I then used an edge guide and installed a t-track for a miter.
I actually made one out of a single piece of MDF and 2 600lb dewalt clamps, it's maybe 2 feet wide and works absolutely perfect for what I need it for. Super easy to throw on the bench and use it.
If you want to learn carpentry, go to school in an apprenticeship program. (There is no music). This is wood working and cabinet making. Carpenters can build houses and buildings.
Great design, great video. Will give this a try. Thinking of adding a fence with a pair of 1x3s at a right angle, 1 flat on the table clamped to the sides and the other with a piece of white board glued to it so the routed wood slides against it. That should work well enough with a half circle cut out of the fence so it fits over the bit.
I saw your videos image searching for a quick-fix table for some 1½" trim I had to rout. I had no hopes clicking the play button, but it turned out to be exactly what I needed! I don't need a fence and you explained why in the first 10 seconds! THANK YOU! Subscribed!
I'm going to redo my table and will certainly use some of your plans. I also added a speed control to mine for better control. Real easy Ebay ($20) addition ! Works great !! Thanks for real easy REAL WORLD video !!
I'm about to make a simplified version of this. Using MDF board as the insert on an old dining table that pulls apart in the middle. It is the perfect thickness to sit flush with the table top. I'm even drilling holes to accommodate the small dowels that keep the insert in place. I have to recut the bearing edges of my drum shells, so the large table top makes things easier. Luckily my awesome roommate has the same Bosch router in this video, just with different bases. He even has the 45° chamfer bit with the roller bearing needed for bearing edge cutting. I'm hooked up, now it's time to get to work!
This was a very simple and well thought out video. I just purchased a DeWalt 618 router that I am thinking I need to put into a tabletop router table like you are making. I appreciate all of your tips. Your music wasn't too annoying, just interesting. I will investigate your channel later to see if I want to subscribe.
oh gosh.... I whas trying to make a perect routertable ans spens hours on integate it to my workbench..... the easyer the solution rhe mor brilliant the craftman are. sorry for my broken english. in germany we say “a real craftsman makes his own tools. word
Excellent video. If you intend to use cove/stick router bits even with 1/4” shank, the hole in the table should be at least two inches as these are fairly large diameter bits.
Wow Awesome Easy to Understand And Not Hard to put together For A Guy Who Don't Know wood I'm Mecnec So Working with wooden tools is Cool to do things with ya got my Vote And Keep up the Great Work And thanks For Sharin Your work Keep them Comin
Cool build - my only tip is a safety tweak. Cross-cutting with miter gauge and end of stock against the fence is a no-no. Lucky you didn't get it ripped out of your hands - and hand sucked into blade. The only reason I'm posting - this happened to me, didn't get hurt but did leave a long brown streak in my undies, and could have easily lost part of my hand. It was close. And it happens before you can blink - there's no way to anticipate or think your way out of a kickback. The way to use the fence as a length gauge is with a stop block clamped on the fence - clamp ahead of blade so all it's doing is setting the length - then there's no way for the piece to bind up. Stay safe!
Yes. The tablesaw work at the first minute was pretty cringeworthy. A crosscut sled would have been much better, or just proper anti-kickback protocols.
This is the first video that I’ve seen from you. Wow!! Great wood working skills and great video making skills. I was able to easily understand. You also showed a cut diagram! You have inspired me.
Hey - that's the same workbench I have - the garage floor! Seriously, until I built a nice one last year, that was my wood working bench for decades. Im getting too old to keep getting up and down and up and down..... That's a neat little router table. Works for me!
Four years later this is still the simplest build yet. Except for the electrical part. My router is fairly new so will just use an extended surge protector with a switch that I can just tap with my foot.
Awesome job man. Short, sweet, and to the point. You didn't add in all the obvious stuff like "for a smooth edge, sand". QUESTION (for anybody) What brand and specifically model is that router?
nice. A locking foot pedal, that moves the router up would be great. The pedal can even be calibrated to give a distance measure pure movement up. To do this, just have a zero at the bottom, then go to the max height, make a number like one. Thus it will give random umber's up to 1(max height) to 0 base default height. Digital calibration. You can leave it at such heights and figure out that 0.5145 is 3/8 an inch, or something of the like, or then further calibrate the number to exact height, by changing the max to the distance. Or use a distance last,r but that could get dust, where a lever works and one can make a lever pedal and 0/1 allows for basically a custom number set, that can be of its own language between tools. However,r his owed take a couple seconds of what is what, i.e. the distance, but oncey ou figured it out for each head it would be the same for that table and setup... I am not entirely likening a unique cutting table with its own measurement language, thus a stand is really a much better system, such as a laser underneath the table in its own place, SO one could use the pedal method, to max depth and height, and then calibrate the laser, 0.001 mils from the surface of the wood to impact and put it in its own chamber. Then it would be a laser measuring system. Also you can double the laser and put a level bead censor, so it tells you that the table is level also.. Thus in combination, the table would be leveled and a locking pedal can give you custom heights instantly for any router in it setup. Thus the calibration of the user is simply the max and min heights of the pedal. and then insert tools. Put the limiters in. and viola... laser in the tube shouldn't be obstructed form going up and down the router if needed. And a bead level bubble by the laser can tel if its level... hmm... No programming just simple lcd display of distance of measure, which can be copy pasted for diy measure distance levels. :D
I have come to notice that most switches in routing tables (I own a little one) come with a switch that is rather difficult to turn on and off, it has a skinny key that needs to be inserted prior to turning it on and off, this switch (from the video) will be rather dangerous for a little one crawling around and attempting to play with it. I don't think that people would work around kids but you never know if someone happens to slip and wander around lol
keep the router turned off and unplugged when not in use. i like the idea of adding a switch to my router table that i built a couple years ago as the router switch is kind of awkward to reach the way i have it set up. adding a switch on the outside would certainly help.
Great video, but not everyone has a table saw and the tools you have. Can you do a video using simple tools to make it, please? (CIRCULAR saw, Jigsaw, Handsaw, etc)
Thank you for this great tutorial! I am confused on the power... does the router power need to be cut to wire in the electrical box? What is plugged in? The power from the wall?
I built this design however the table is not flat at all. I'm not sure if the top piece of plywood is thick enough to support the weight of the router? Is there a way to make the table flat?
Hi Travis, great video tutorial on the build! You are lucky with your router because your bolts can extend and go right thru. On my Ryobi router I have to calculate the length of bolt to use and it is a real pain!! Keep up the good work!
Making a table like this. Very easy instructions you give. However I am not much of an electrician and wonder where the actual power comes. Is it to an outside plug? Can anyone explain this to me.
Thanks for the video. I built my table using your video in about 30 minutes. I used wood spray glue from 3M so I didn't have to wait for the other wood glue to cure. Much appreciated
Thank you James!
Jeez that was quick
James Eberhardt, good approach I like this. For your novice carpenter this is perfect.
James Eberhardt
@@bretlambky Yup, and that would be me☺ Thanks James.
If the wiring is new to you, get a little $5 power strip with a switch on the end. Plug the strip into the power supply, plug the router into the power strip, use the power strip switch to turn the router on and off.
Your display of table dimensions is great!
I know that this is an older video, but I’ve always appreciated more down to Earth approaches to woodworking. It’s nice to see videos that are attainable for normal people to build and afford.
just watched a video of someone making a router table labelled as "easy" and it would've been impossible to build without a wide array of professional wood working tools. LOVE this video as a small time DIY person.
I wanted to say something smart ass about having thousands of dollars worth of woodworking tools but spends 20 bucks andmakes a router table but, damn it I just couldn't do it. This was a damn fine video. Interesting, clear speaking, no overly loud music, and to the point. Thank you sir, I will be using your video for my DIY table today!!
A no bullshit build, kept the talking to a minimum. Excellent. Thanks mate.
I LOVE videos that get right to the point, move quickly, and don't waste time. Excellent.
Words cannot express how amazing it is to look up something... and find EXACTLY what you are looking for. Thank you for this vid.
Same here, I liked the simple dust collection idea too.
I know what I’m building tomorrow. 😊
The rocker switch is good for quick "off" but also very easy on. It would add $8-$10 to the build but an actual E-Stop switch/button available from your favorite online retailer would be well worth it.
Also, like others have mentioned...careful on those cross cuts with the miter gauge and fence...kickback is no joke.
Wow! Finally a router table without an insert plate (which nobody ever explains why they use it). Thanks!
Just to make sure that their router mounts up nice and wonky so there's no risk of the bit actually being perpendicular to the table.
Wow, dude, you are incredibly articulate. Informative, intelligent, and very to the point. This is an 11/10 video and you got a sub out of it. Most videos have that annoying 60s intro and they mumble with no real direction for the video like they did it last minute and this is a huge sigh of relief from me.
Great solution for dust collection when using it without a fence. Adding a fence to this basic design should be a simple process too. Nice cheap, simple approach. Thanks!
I am building this with a couple of simple modifications. Mine is 18" x 30", (Had a laminate drop), and since my router depth adjustment is not like the 892 porter cable, I put a 2" x 4" strut across the front and back, and added a piano hinge on the back so I could just lift the top to make my adjustments, or change the bits. I then used an edge guide and installed a t-track for a miter.
I've been watching many vids on router table building trying to find the right design. So far I like this one the best.
I made a similar router table a few years back. I used a Harbor Freight foot switch to turn the router on an off. It cost about $14.
Awesome, just saved ~$140 by watching and learning this is possible for my router. Thanks man!
so here i am 5years after you made this thinking...wow awesome and cheap thanks for making this!
I actually made one out of a single piece of MDF and 2 600lb dewalt clamps, it's maybe 2 feet wide and works absolutely perfect for what I need it for. Super easy to throw on the bench and use it.
Carpentry law #44564: If you are interested in learning carpentry, you have to live through the torturous music in carpentry videos.
It is written
If you want to learn carpentry, go to school in an apprenticeship program. (There is no music). This is wood working and cabinet making. Carpenters can build houses and buildings.
@@tedrowland7800 he can easily re-phrase the statement and nothing will change... those musaks r still torturing...
@ manly studly (pun intended) "carpenters" bitching is annoying
Its music they find for free.
Many years ago I picked up a sink cutout with a formica top for a couple bucks at HD. I built the frame out of 2x4's.
Added some aluminum angle iron to the sides to make a smooth slide. Does work great! I can easily adjust w paper shims I make square.
Great design, great video. Will give this a try. Thinking of adding a fence with a pair of 1x3s at a right angle, 1 flat on the table clamped to the sides and the other with a piece of white board glued to it so the routed wood slides against it. That should work well enough with a half circle cut out of the fence so it fits over the bit.
I saw your videos image searching for a quick-fix table for some 1½" trim I had to rout. I had no hopes clicking the play button, but it turned out to be exactly what I needed! I don't need a fence and you explained why in the first 10 seconds! THANK YOU! Subscribed!
I'm going to redo my table and will certainly use some of your plans. I also added a speed control to mine for better control. Real easy Ebay ($20) addition ! Works great !! Thanks for real easy REAL WORLD video !!
NIce job. Clear and to the point. Thank you for not adding opening theme music, graphics, and bad scripted comedy.
Great video, however I would never ever use that type of rocker switch for any power tool as it is far too easy to accidentally bump and turn on.
I'm about to make a simplified version of this. Using MDF board as the insert on an old dining table that pulls apart in the middle. It is the perfect thickness to sit flush with the table top. I'm even drilling holes to accommodate the small dowels that keep the insert in place. I have to recut the bearing edges of my drum shells, so the large table top makes things easier. Luckily my awesome roommate has the same Bosch router in this video, just with different bases. He even has the 45° chamfer bit with the roller bearing needed for bearing edge cutting. I'm hooked up, now it's time to get to work!
I watched quite a few related videos. This is simplest, most understandable and doable. Thanks buddy.. I enjoyed watching it.
Excellent video and process
You saved me a lot of work
Thanks for sharing
What can I say but; "Outstanding!"
Thanks,
Rich
Make sure u go againts the rotation, i saw the piece of wood going abit back when u routed it. just a heads up.
This was a very simple and well thought out video. I just purchased a DeWalt 618 router that I am thinking I need to put into a tabletop router table like you are making. I appreciate all of your tips. Your music wasn't too annoying, just interesting. I will investigate your channel later to see if I want to subscribe.
Great video not to fast but fast enough to follow along and not a lot of extra talking. Well done!!!
oh gosh.... I whas trying to make a perect routertable ans spens hours on integate it to my workbench..... the easyer the solution rhe mor brilliant the craftman are. sorry for my broken english. in germany we say “a real craftsman makes his own tools. word
Super simple...I like it. Going to do some base boards and do not want to get an expensive router table.
I’ve learnt so much by watching your quick video. Thanks mate! 🇦🇺
Excellent video. If you intend to use cove/stick router bits even with 1/4” shank, the hole in the table should be at least two inches as these are fairly large diameter bits.
Wow Awesome Easy to Understand And Not Hard to put together For A Guy Who Don't Know wood I'm Mecnec So Working with wooden tools is Cool to do things with ya got my Vote And Keep up the Great Work And thanks For Sharin Your work Keep them Comin
I just used your video and built one like it. Great video. Great teaching. Thanks.
That was concise and well produced.
Cool build - my only tip is a safety tweak. Cross-cutting with miter gauge and end of stock against the fence is a no-no. Lucky you didn't get it ripped out of your hands - and hand sucked into blade. The only reason I'm posting - this happened to me, didn't get hurt but did leave a long brown streak in my undies, and could have easily lost part of my hand. It was close. And it happens before you can blink - there's no way to anticipate or think your way out of a kickback. The way to use the fence as a length gauge is with a stop block clamped on the fence - clamp ahead of blade so all it's doing is setting the length - then there's no way for the piece to bind up. Stay safe!
Tioga Fretworks
Tioga Fretworks w
i do not see what was dangerous
Yes. The tablesaw work at the first minute was pretty cringeworthy. A crosscut sled would have been much better, or just proper anti-kickback protocols.
very true...should use a spacer block in front of the fence so that the wood doesn't touch it as it slides...otherwise you would get kickback
This is the first video that I’ve seen from you. Wow!! Great wood working skills and great video making skills. I was able to easily understand. You also showed a cut diagram! You have inspired me.
Nice and simple. I'm going to need to build one of these very soon.
I would have loved to see you you installed a fence, that you could actually set, and measure.
But why is it required if the router bit has the ball bearing??
As many other said: quick and to the point. Thanks!
Hey - that's the same workbench I have - the garage floor! Seriously, until I built a nice one last year, that was my wood working bench for decades. Im getting too old to keep getting up and down and up and down..... That's a neat little router table. Works for me!
Awesome work and explanation! Made one this morning. Waiting to go to home depot to get the white hardboard.
I like this turorial,easy to follow and clear
Four years later this is still the simplest build yet. Except for the electrical part. My router is fairly new so will just use an extended surge protector with a switch that I can just tap with my foot.
Bro-tein Shake, nice job!
Im on it tomorrow. You just stepped my game up and for that, I thank you.
NOW SHOW ME THE FENCE ADDITION!!!
Stephen Rangel cool comment Theodore Bro-sevelt..........haha
yes I would also know if you have added a fence and is there a video
Wow, you’re so smart! Thanks for inspiring!
Excellent presentation Thank you. The screws holding the base plate are about 1/4 inch. What are the lengths of the ones you used?
Just built it. Awesome!
I think its called antiskid material that the timber is placed onto while routing.
Awesome job man. Short, sweet, and to the point. You didn't add in all the obvious stuff like "for a smooth edge, sand". QUESTION (for anybody) What brand and specifically model is that router?
Great video. Very simple yet smart.
This is my next job on lockdown thanks
Thanks Mate from The UK
- Thanx a million for sharing the project. Just what I need for a quick, single project.
Neat little table. Thanks for sharing !
Awesome man. Made one over the past 2 days which is an exact replica of yours. Thanks for the video.
I'm glad it helped Dan!
Easy job, very well done and documented... Liked
Great work! You've given me some great ideas for my router table. Thanks.
Thanks for the awesome idea! Made mine from parts I had laying around. Works fantastic!!!
This looks to be my next project.........thanks......
Great Video. So easy. Thanks so much.
You have the same assembly table that I do, a concrete floor... how crazy is that lol.
nice. A locking foot pedal, that moves the router up would be great. The pedal can even be calibrated to give a distance measure pure movement up. To do this, just have a zero at the bottom, then go to the max height, make a number like one. Thus it will give random umber's up to 1(max height) to 0 base default height. Digital calibration. You can leave it at such heights and figure out that 0.5145 is 3/8 an inch, or something of the like, or then further calibrate the number to exact height, by changing the max to the distance. Or use a distance last,r but that could get dust, where a lever works and one can make a lever pedal and 0/1 allows for basically a custom number set, that can be of its own language between tools. However,r his owed take a couple seconds of what is what, i.e. the distance, but oncey ou figured it out for each head it would be the same for that table and setup... I am not entirely likening a unique cutting table with its own measurement language, thus a stand is really a much better system, such as a laser underneath the table in its own place, SO one could use the pedal method, to max depth and height, and then calibrate the laser, 0.001 mils from the surface of the wood to impact and put it in its own chamber. Then it would be a laser measuring system. Also you can double the laser and put a level bead censor, so it tells you that the table is level also.. Thus in combination, the table would be leveled and a locking pedal can give you custom heights instantly for any router in it setup. Thus the calibration of the user is simply the max and min heights of the pedal. and then insert tools. Put the limiters in. and viola... laser in the tube shouldn't be obstructed form going up and down the router if needed. And a bead level bubble by the laser can tel if its level... hmm... No programming just simple lcd display of distance of measure, which can be copy pasted for diy measure distance levels. :D
Nice design. Good job!
Really neat router table!
Good video. Succinct, simple, to the point. This is what I am going to build today. Thanks for the idea\plans.
Nice work!
I have come to notice that most switches in routing tables (I own a little one) come with a switch that is rather difficult to turn on and off, it has a skinny key that needs to be inserted prior to turning it on and off, this switch (from the video) will be rather dangerous for a little one crawling around and attempting to play with it. I don't think that people would work around kids but you never know if someone happens to slip and wander around lol
keep the router turned off and unplugged when not in use.
i like the idea of adding a switch to my router table that i built a couple years ago as the router switch is kind of awkward to reach the way i have it set up. adding a switch on the outside would certainly help.
@@paulk5311 a safe switch is appropriate and I see why manufacturers use one with a key for tables that have a power supply cable and on/off switches.
thanks, great video. gonna make one based on these awesome instructions.
Very nice and simple build, thanks for posting. A router table is next on my list and this makes it a bit simpler.
I like what you built. So simplistically explained. What router do you recommend buying?
I like what you did with the dust collection
I have a video that details my dust collection system as well.
Great video, but not everyone has a table saw and the tools you have. Can you do a video using simple tools to make it, please? (CIRCULAR saw, Jigsaw, Handsaw, etc)
Can you make this foldable for compact storage?
I like the dust collection good job
Thank you for this great tutorial! I am confused on the power... does the router power need to be cut to wire in the electrical box? What is plugged in? The power from the wall?
I was confused as well. I am not to electrical savvy. I may just forgo it until I have some help haha
Great project, thanks!
Isn't there a material that can be placed underneath the timber that prevents it from sliding?
Great idea. Time to build one. Thanks
Very helpfull instructions video. Thank you very much.
Good video Like the dimension plan
I made this using 3/4 melamine. One sheet of wood, slick surface, easy
You just reminded me what I have in my attic. Board to make router table out of - sorted!☺️
Thanks so much! I'm building a shop over the winter, and this table is definitely on my list.
came from E.C. to see hammer build then to this nice job on both. i soon will be making this for a job i have. thank you stay safe
What kind of router table, without any Guide support.
I built this design however the table is not flat at all. I'm not sure if the top piece of plywood is thick enough to support the weight of the router? Is there a way to make the table flat?
How do you wire the outlet and switch?
Nice job. Just wondering why you used the spade bit only on the white board and not all the way through?
Do you have a video on how to make a fence for this?
Hi Travis, great video tutorial on the build! You are lucky with your router because your bolts can extend and go right thru. On my Ryobi router I have to calculate the length of bolt to use and it is a real pain!! Keep up the good work!
Thank you you helped me allot. regards from down under.
Perfect for some drum bearing edges cut. thanks for sharing this man !
I like this Video, I am going to use it and build me a table, I was looking at buying one,but I like this better.
what router is that make and model? what all routers can you do that without a plate? the ones I have the collet wont go up that high.
Thank you for sharing and like your video especially how you list the material and cut list.
Making a table like this. Very easy instructions you give. However I am not much of an electrician and wonder where the actual power comes. Is it to an outside plug? Can anyone explain this to me.