It is so awesome to watch your videos (long time sub here but never comment) and I think the best reason that is, is because there is always something that I learn from your videos. Whether intentional or non intentional. Something simple like @7:12 where you are using a heat gun to check each separate exhaust runner for temp consistency. Things I would forget/not think of that I can use for checking everything on my build even though it would never have crossed my mind.
Yes I thought I said this in the video but I might have missed it, I just wanted to try his box to see if it works, then after that I wired the Holley to do it all and the flex sensor, that’s all in the next update
Ladies and Gentle Men, Place your bets, What PSI boost is the drivers side head gasket going to give up? I got one for 12psi. Can I get one for 12.5?...jk Awesome work Matt, keep it going strong.
will thebump box work for a th400 trans I have a 1980 Pontiac Lamaze Grand Safari wagon with 94,000 Miles and I'm doing a sloppy 6.0 that I paid a hundred a bucks for it but has Rusty cylinders and Rusty heads.
@@SloppyMechanics yes I do to freshly built turbo 400 with a 3200 3800 stall.if you'd like to see some pictures of my wagon out posted up on your Facebook page me and my three kids drove it all the way home to Michigan
I’m building a billet 80 t4 5.3 Jeep Cherokee with the Holley terminator x and would love to win the giveaway for the simple stage for my th350 with a brake in it, would be nice to lurch in
"I choo, choo, choose you!" ---Ralph Wigam 😊
If you go 8s on mismatched used head gaskets, people's heads are going to explode.
Then they will have to upgrade their "head" gaskets to MLS...
@@kevin9c1 🤦🏽♂️🤣
When*
Matt the harbor freight of horsepower!!
That whistle at the end... Woot!!!
It does sound pretty good so far, can’t wait to see it all buttoned up and making some passes. Keep up the good work.👍
That turbo sounded sweet! The last second or two of it coming down from 2 step was awesome!
Oh you mean when it didint have oil pressure when the motor was off and the turbo was at 58,000 rpms .. yeah that sounded sweet
It is so awesome to watch your videos (long time sub here but never comment) and I think the best reason that is, is because there is always something that I learn from your videos. Whether intentional or non intentional. Something simple like @7:12 where you are using a heat gun to check each separate exhaust runner for temp consistency. Things I would forget/not think of that I can use for checking everything on my build even though it would never have crossed my mind.
Moments like 5:19 will become a meme for weeks on end, you do this to yourself lol
😂😂😂😂
Nice work Matt I'm definitely going to give that 2 step/bump box a go seems like it works. The car sounds great can't wait to see what it takes.
Hell ya man, love the videos. I had the turbo suburban that had the stock fuel rail fail and burn my truck ): put a extinguisher in that bad boy (:
Sounding good man. Youre good at what you do.
It sure makes all the right noises.
Matt ur vids r the shit. always undrstandable for us slow brains keep them coming and enjoy ur wife and crumb catchers.
Sounds great, can't wait to see her run
Turbo noises! Can't wait to see it's progress.
The child part of me wanted you to dry hop it out of the garage lol
Great videos, I'm building an ls mustang now. And this helps me out alot
I was just praying that the trans brake didn't let go and launch you through the garage.
Love this build
Coming along nicely
Some sox... And timberland boots... Son your going to break your ankles...
Where can I get one of those transbrake/ bump box’s for a 4L80
Perfect way to end a Friday night
it would be nice with an overlay if its possible , to see the boost vs rpm :-)
Awesome work on the car Matt .... just curious though . Doesn’t the Holley have a built in bump box ?
Yes I thought I said this in the video but I might have missed it, I just wanted to try his box to see if it works, then after that I wired the Holley to do it all and the flex sensor, that’s all in the next update
I could if missed you saying it as well . Wanted to make sure I was dully informed before ordering mine . 👍
Almost time to launch this baby!
Ok... Who else expected to see the car rip forward out of frame and hear Looney Tunes music afterward?
This is so awesome but what do I have to do to get a email reply from to get my car on the dyno?
Does Jakes currently stock this converter? If so how much thanks.
Justin Malbrough I’m interested in that also. I want to know if it’s going to wipe out the trust bearings on the engine.
Would you get them jacks again if you had to ?
What is the brand of those jacks?
Would love a brake boost bump box!
What do you normally run for oil in your combos 5W30 ?
rotella t4-t6 15-40
How does that trans brake work or box thingy u got for the mustang
How does one win one of these boost controllers?
Ahh jeez why you gotta drop the video when I'm studying!?!? Dang it learning isn't important anyways...
Hey honey I will be in the kitchen in a sec!! Hits trans brake
2:22 mmmmm lovely
What kind of a lift is that?
Anyone else been getting double ads the past few days? Like every ad will show ad 1 of 2 and 2 of 2
Ya shits gettin old real fast youtubes fuckin up i hate that shit!
need longer, just have your assistant ramble on, he's got to be pushing 2 now?
Dang 8f8 blue balls over here
Ladies and Gentle Men, Place your bets, What PSI boost is the drivers side head gasket going to give up? I got one for 12psi. Can I get one for 12.5?...jk Awesome work Matt, keep it going strong.
THE ANTICIPATION
UNBEARABLE
nice
nice wknd entry
fixing a slowstang with a turbo LS. Choo Choo
What jacks are those?
QuickJack.
@@BlaserBuilds thanks
Spooollll psssshhh.
I'm installing MS3 Pro. Where are the sloppy start up tunes saved?
In the sloppy Wikipedia
Good luck! I sold my MS3 Pro setup but I miss it
drive.google.com/drive/u/0/mobile/folders/1IK9MKON_MfZD4bRBT11yDAWi9pdHP7yP
what happend? it shut off at the end of the video?
it spit the crank on the floor,
no its just rich on decel from the brake and i dont have enough parked IAC count and it died with i chopped to 0 tps
I love those "floor jacks," anyone know what brand they are?
quickjack
Hey Matt how do you like that lift? Pretty good working on bottom of car?
They're not ideal for under the car, but doable. I find I use mine mainly for suspension and brake work. Good for tire rotations, wheel swaps, etc.
Choooo choooooo
will thebump box work for a th400 trans I have a 1980 Pontiac Lamaze Grand Safari wagon with 94,000 Miles and I'm doing a sloppy 6.0 that I paid a hundred a bucks for it but has Rusty cylinders and Rusty heads.
if you have a trans brake, and something to do it, yes
@@SloppyMechanics yes I do to freshly built turbo 400 with a 3200 3800 stall.if you'd like to see some pictures of my wagon out posted up on your Facebook page me and my three kids drove it all the way home to Michigan
Who uses Facebook but not UA-cam I am the other way kinda want to get off UA-cam because they are terrible but there is so much good content like this
I’m building a billet 80 t4 5.3 Jeep Cherokee with the Holley terminator x and would love to win the giveaway for the simple stage for my th350 with a brake in it, would be nice to lurch in
Who TF has a Facebook account and not a Google account. My lord.
I could use a bump box..
How the fudge does some one not have a UA-cam account but have a FB account? SMH LOL
That's me. UA-cam ,no FB ..haha
@@poolesperformance6146 Me too!
If they don’t watch the UA-cam they should not be allowed on the Facebook page. It would weed out a lot of the stupidity on the Facebook page
bump box for meeee for freeeee. . . plz lol
Dude your not homeless... Your feet look like a fool... Please put some time into what you're walking on.. Safety first.. Don't brake a ankle..
First!
damn
Sloppylicious