Voltage Drop Calculation: Cable Size for Solar Panels and Limit Power Loss

Поділитися
Вставка
  • Опубліковано 22 жов 2024

КОМЕНТАРІ • 21

  • @cleversolarpower
    @cleversolarpower  Рік тому +1

    🎁Get 7 FREE diagrams to kickstart your Off-Grid journey! View and get them here: cleversolarpower.com/free-diagrams/ 🎁

  • @DutchAussieProductions
    @DutchAussieProductions 18 днів тому

    Greetings from Australia. Thanks for your videos, Nick. You have a new subscriber.

  • @dougiee6589
    @dougiee6589 7 місяців тому +1

    Ahhh this is excellent gov'

  • @janjaweed
    @janjaweed 2 роки тому +1

    your videos are awesome, I like it very much

  • @pradeeparuna3711
    @pradeeparuna3711 Рік тому

    Thnks for the inform mr .

  •  2 місяці тому

    Do you have the soft copy of your book so I can just pay and download?

  • @annikebriedenhann3722
    @annikebriedenhann3722 2 роки тому

    Please tell me, we have switched from 12volt to 24 volt system. We have 5x200watt 36volt solar panels. 4 deep cell gel batteries 150Amp hour each. MPPT charge controller with built in inverter. On the 12 volt system we got up to 32 Amps and 26volt. Now we only get max 32 volt and 9.9Amp. What could be the problem please?

    • @cleversolarpower
      @cleversolarpower  2 роки тому +1

      26V with a 12V system is not possible. Check the settings of your charge controller and adjust it if necessary. How are your panels wired? send me an email for better communication.

    • @annikebriedenhann3722
      @annikebriedenhann3722 2 роки тому

      @@cleversolarpower Thank you for replying. Much aporeciated. Please give me your email address for possible future queries if you don't mind. We have not used the same charge controller. We actually bought a new 24 volt mppt charge controller. We have found the problem. Have replaced the diodes on panels. Running like a dream now with only 4 panels. Going to use 12volt controller to start a second separate solar system. Once again, appreciate your response.

  • @shofarsogood7504
    @shofarsogood7504 2 роки тому

    .05 ohm X5 amp only = .25 v
    What am I missing or why does video calculator show .5 volt drop?

    • @cleversolarpower
      @cleversolarpower  2 роки тому +1

      Vdrop = 2·I·R·L -> 2*5A*0.0009899ohm*50ft= 0,49495V
      where:
      2= wire in two directions
      I=current through the wire
      R= resistance per feet of copper wire
      L= length of wire in a single run in ft

    • @shofarsogood7504
      @shofarsogood7504 2 роки тому

      @@cleversolarpower thanks so much. I found vd=KIL/ cm works well and taught me I have to account for round trip of wire. Thank you for your help!

  • @utube521
    @utube521 Рік тому +1

    what is gallon?

    • @cleversolarpower
      @cleversolarpower  Рік тому +1

      3.78 liters

    • @Reman1975
      @Reman1975 Рік тому

      @@cleversolarpower A useful fact about that. The number of litres you quoted is for what's better referred to as a "US gallon". In the UK (And a lot of the old Commonwealth countries), "a gallon" is 4.55 litres. It can cause confusion when something online just specifies "Add a gallon of [XYZ]" without saying whether they mean a US or imperial gallon. It can also really skew things like fuel economy figures when checking car specs on different websites. For example, my car will do 50mpg when quoted on a UK website, but only 42mpg when it's measured in US Gallons on an American site, so knowing which version of "Gallon" is being used can make quite a significant difference.
      To confuse matters even further, there's also the less common "US dry gallon", which is about 4.404 litres. :)

  • @juneja6268
    @juneja6268 2 роки тому

    where is the link

    • @cleversolarpower
      @cleversolarpower  2 роки тому

      Here you go: www.calculator.net/voltage-drop-calculator.html

  • @charleymacgivar4949
    @charleymacgivar4949 4 місяці тому

    Do you have the soft copy of your book so I can just pay and download?