Haha ya videos always seem easier than the real thing. But honestly, this wasn’t to bad of job over all. The main part I had trouble with was the bracket on the backside and the little catalytic converter shield. I thought I could get by without taking it off. My advice take it off, don’t even try working around it. But I hope the video helps you. Thanks for watching!
It can be done I’ve dropped plenty on the ground but it’s a real pain to record and be able to show you everything. Best of luck on your sons. Thanks for watching!
Hola saludos de df México eres muy cuidadoso para trabajar tengo un mazda 2012 y ya está mal una válvula de la trasmisión como me gustaría Aser lo que tú ases felisidades y lo que me impresiona que solo tu solito te avientas la chamba 😮😮😮😮 que buen mecánico eres 🎉🎉🎉🎉
jaja gracias eso siempre significa mucho! saludos desde america. Odio saber que eso le pasó a tu vehículo, ¡pero estoy seguro de que podrás descomponerlo! toda la suerte. ¡gracias por ver!
do you know how much different removing the 6speed manual from the 2.5l engine would be from this? i am struggling to find anything for that specific engine and transmission
@@JunkyardJunkie LOL mine is 153,000 and it is already so messed up like slips like crazy on 2nd to 3rd and sometimes doesn't even go into reverse gear.
Transmission are Interchangeable between the years of 2004 to 2013? I have a 04 Mazda 3 2.0 that needs a transmission and I found one but in a 2013 Mazda 3 2.0 would it be compatible regardless ?
@@JunkyardJunkie the one I’m looking at is a 2.0 just like my 2004. Thanks so much for the info if that’s the case I think I’ll buy the transmission from the 2013 for $400 what the guy is asking for !
Need advice, bought used tranny from eBay for 400ish to replace blown transmission differential- mechanic told me the axles slipped out and there was oil leak from somewhere so that’s why I bought new trans assuming differential broke and so now he’s telling me the spider gears don’t align and he can’t put it together because the transmission I bought, he would have to disassemble and reassemble it to fit axles, is he bullshitting me?
@@JunkyardJunkie thanks for your very straightforward and absolutely helpful walkthrough man. saved my life. im writing this swapping transmission in my dominos parking lot. im a driver. and it was what i did the first time getting the tranny out. im gonna try the starter now.
@@JunkyardJunkie total edit after transmission swapped, if you dont remove the starter prior to removal of tranny, it will be a little problem getting it to align unless you remove the starter and then align it, then put the starter on.
I’m really glad I was able to help! I’m really glad you were able to do it and congrats that’s defiantly something to be proud of! As for the starter ya take it off remove torque converter bolts then drop tranny like you said it makes it easier to line up. Anyways have a good one bud. Thanks for watching!
In the video I show you everything you need to take off. So you should be able to see everything not sure what ground cable you’re talking about. best of luck! Thanks for watching!
Man you made this look a hell of a lot easier than I know it’s going to be 😂😂😂
Haha ya videos always seem easier than the real thing. But honestly, this wasn’t to bad of job over all. The main part I had trouble with was the bracket on the backside and the little catalytic converter shield. I thought I could get by without taking it off. My advice take it off, don’t even try working around it. But I hope the video helps you. Thanks for watching!
I’m about to tackle mine today 😅 wish me luck , this video def gave me a good idea of what to expect .
That’s one hell of a job! Hope part 2 will be out next week!
It’s defiantly a big job. But part two will be out Saturday. Thanks for watching!
You can do this at your home….. raises the car on a lift lol. Thanks for the video I have to change my sons transmission
It can be done I’ve dropped plenty on the ground but it’s a real pain to record and be able to show you everything. Best of luck on your sons. Thanks for watching!
Do you know off hand if the process is the same or similar for the 2.5L mazda engine? Thank you for any insight. Thank you.
I believe it’s just about the same procedure. Hope this helps. Thanks for watching!
@@JunkyardJunkie it really has. Thank you man.
very good job
Thank you. Glad it could help. Thanks for watching!
Hola saludos de df México eres muy cuidadoso para trabajar tengo un mazda 2012 y ya está mal una válvula de la trasmisión como me gustaría Aser lo que tú ases felisidades y lo que me impresiona que solo tu solito te avientas la chamba 😮😮😮😮 que buen mecánico eres 🎉🎉🎉🎉
jaja gracias eso siempre significa mucho! saludos desde america. Odio saber que eso le pasó a tu vehículo, ¡pero estoy seguro de que podrás descomponerlo! toda la suerte. ¡gracias por ver!
do you know how much different removing the 6speed manual from the 2.5l engine would be from this? i am struggling to find anything for that specific engine and transmission
What’s your email I’ll help you out.
Would this process be about the same with a manual transmission?
Ya it should be pretty much the same. Hope this helps. Thanks for watching!
@@JunkyardJunkie Should help a lot, thank you. Planning on replacing mine soon.
Good luck. You got this.
how did you manage to disconnect the connector in front... behind the shift connector ? the one that runs the solenoids???
I’ll be honest I’m not sure everything went pretty easy and everything is in the video. Best of luck. Thanks for watching!
Hi what was the milage of the 2010 mazda 3 when it needed a transmission ?
This one was around 180k. but, it wasn’t maintained like it should have been. Hope this helps. Thanks for watching!
@@JunkyardJunkie LOL mine is 153,000 and it is already so messed up like slips like crazy on 2nd to 3rd and sometimes doesn't even go into reverse gear.
Is this process the same for a 2010 cx-7?
It should be very similar. Hope this helps. Thanks for watching!
Transmission are Interchangeable between the years of 2004 to 2013? I have a 04 Mazda 3 2.0 that needs a transmission and I found one but in a 2013 Mazda 3 2.0 would it be compatible regardless ?
Yes that’s the range. As long as it’s the same engine it’ll work. 2010-2013 only changed in cosmetics mainly. Hope this helps. Thanks for watching
@@JunkyardJunkie the one I’m looking at is a 2.0 just like my 2004. Thanks so much for the info if that’s the case I think I’ll buy the transmission from the 2013 for $400 what the guy is asking for !
thank you very moch
I’m glad I was able to help! Thanks for watching!
How much to change a clutch on a Mazda
If you tell me the year and model I can look up how much book time it is. But different shops have different quotes. Thanks for watching!
Need advice, bought used tranny from eBay for 400ish to replace blown transmission differential- mechanic told me the axles slipped out and there was oil leak from somewhere so that’s why I bought new trans assuming differential broke and so now he’s telling me the spider gears don’t align and he can’t put it together because the transmission I bought, he would have to disassemble and reassemble it to fit axles, is he bullshitting me?
Drop the oil pan and you'll have access to the flywheel bolts
Hey everyone’s got there ways I’ve always took them off at the starter. Thanks for watching!
@@JunkyardJunkie thanks for your very straightforward and absolutely helpful walkthrough man. saved my life. im writing this swapping transmission in my dominos parking lot. im a driver. and it was what i did the first time getting the tranny out. im gonna try the starter now.
@@JunkyardJunkie total edit after transmission swapped, if you dont remove the starter prior to removal of tranny, it will be a little problem getting it to align unless you remove the starter and then align it, then put the starter on.
I’m really glad I was able to help! I’m really glad you were able to do it and congrats that’s defiantly something to be proud of! As for the starter ya take it off remove torque converter bolts then drop tranny like you said it makes it easier to line up. Anyways have a good one bud. Thanks for watching!
IM TRYING FIND WHERE THE GROUND WIRES GO BACK TO i been struugling
In the video I show you everything you need to take off. So you should be able to see everything not sure what ground cable you’re talking about. best of luck! Thanks for watching!
Would this be the same process for a 2006 Mazdaspeed 3 with the 2.3L turbo engine & 6 speed manual
So it’s going to be similar but not exact same. Hope this helps. Thanks for watching!
It is a pain in the butt, there are two bolts between cv joint a exhaust manifold that makes this harder
Yup, they can’t make it too easy haha. Hope the videos helped. Thanks for watching!