This video definitely deserves a thumbs up! Thanks for providing a solution to the Hurricane's potential high speed woobles using the exway washers and disclosing the better pulleys. I was on the fence about the Hurricane bz of the low clearance and fast speed with the inherent woobles from double kingpin trucks but now I feel that issue is remedied due to this video! I was thinking of going with the Propel Endeavor 2 for ruggedness n stability but its way to expensive and I am mostly a street rider that hits train tracks n rocks n debris sometimes at high speed!
6:00 When i watch some other tubers vids they don't seem to use the strap, but like you said its kind of a life saver to drop it. On hub motors you can keep rolling like a real board and use your foot break. I Got 120mm on my meepo V3, it was a pain in the ass removing the polyurethane but once installed gained so much traction on back alleys, beach paths, gravel paths and rough roads withouttoo much vibration, its almost like surfing but on land.
It would be cool to see a side by side race using the stock pully and 29T for an acceleration comparison. Do you lose a lot of torque and acceleration switching to the 29T?
Your tip of dropping the remote is easy to forget. My thumb has a mind of its own when I'm adjusting stuff. Nearly came off several times. Every time it happens I remember your tip!
God damn thats 65km/h more than enough for many riders. How the fck your board can go that fast while you are having balls of steel giving that much of weight?:Ddd
@@deanh3678 Hi Dean! Yes I have! It was shipped/transitted 19th of this month and then I received the code. It was handed to DPD (transit company) on 16th. There might be still tons of orders bc blackfriday just keep tight brother!
@@TraxxasJr I have to say I am not 100% sure. First I ordered with sea shipping. Later i wanted to upgrade to air and messaged meepos custom service about it talked couple days. Just got message that i have to pay extra 400$ but no thing where lol. Asked about it but didnt get answer anymore just the confirmation of the sended board. I think it is shipped by sea. I am also staying in north-Europe it might have a difference!
Can you tell us about the Hurricane remote settings : it was possible to select your custom 29T gearing ratio (in order to display the right speed on the remote)? is it possible to select a speed limit?
thats ur preference brotha… my hurricane i have only ONE on the rear truck and its roadside. u might want more , or u might like it. i use one front and rear on my hadean because its flex and dkp combination is very carvy and lots of rebound.
WooooooWeeeee! 40 freakin' mph! That's insane esp for an off the shelf product!!! HOOOOLY! Are the Hadean ppl up in arms or running to the safe space in terror! Sweet bro, thanks for the vid!!! A1
Hello new sub cause this channel is so good but I ordered my meepo today because of this and now I’m finding all negative/shipping/service posts ..I’m ultra paranoid now can someone provide some insight or maybe back in the day they were probably not the best but are good . Thanks :) friendly Canadian neighbor gonna use it from my igloo to work lol jokes
@@itsbrianchen so i did 23T to the zeus. didnt do anything. the way its geared and built, wont help the top speed.. only time i dont suggest board bumpers. not for the zeus.
@@esk8unity really! thanks so much. How about hurricane with gears? like 23T or 29T or 40T? If it is true.... crap. I could've bought the hurricane when they had a deal (like $1300?).
Remember when you used to skip stones as a kid.... im pretty sure that's what the human body would do on the road if you came off at 40mph/64kph.... Eeek, Big balls mate, great vid too 👍
Damn me and you have a very similar ridding style, nice to see a eskate review that can actually pull some tricks and slides, keep doing what you doing
And boardbumpers has got some awesome stuff. I got my GTR crusin at 25-26 mph with there 56T pulley on my AT setup. Plus there belt covers and smashguards are super cool
What I really like and one of the reasons that made me want to subscribe to your channel is the very special atmosphere that emanates from your vids. It's true, as you say in another vid, you're not the best when it comes about specs details and explanation, etc, but the atmosphere in your vids is certainly better than other youtubers that are very technical and encyclopedic but a little annoying like Daniel Kwan, I dare to say this. I have a question I really burn to ask you : I enjoy watching you dancing on the board in your vids and I would like sooo much to learn this. Can you tell me what is your cruising speed when you do longboard dancing ? And what is your max speed ?
Hey brotha, I'm getting 15 miles tops on the same exact setup on a brand new hurricane. I'm 170,flat terrain pretty much. Speed mode 4 aggressive riding. Do u think there's a problem with my range. That seems like no were near enough miles. Please lnk. Thanks alot for everything. Those exway washers maje world of difference
So with those pulleys what are the differences? I kind of wanted a stock board with cloudwheels video? Where did you get the belts from to match the pulleys etc what do the pulleys do? Decrease torque and increase top speed?
so cloudwheels usually come with 40T pullies.. i wanted to try something closer to there stock 32T street setup:. i don’t think theres any 32t abec style pully except evolves which dont fit cloudwheels.. so i used 29T abec.. more speed. suppost to knock off some acceleration power but i didnt really feel the difference.. board bumper also makes 36T abec which will be a GREAT medium for this setup..
Ok guy's i get the meepo hurricane after 2 month and half waiting... I get bad surprise when i open the box, the belt guard was broken and one wheel was deformed and had a flat part what is dangerous. I wrote to customer service to explain and asked for new tire and belt guard, Bonnie write me and tried to say it is my fault not them, I am liar, I broke it... I took pics and videos of broken part to show Bonnie that I didn't ride yet with it. Finally after more than 25 message she said sorry and tell me they will send me belt guard but nothing about the tire, she said I have to repair it what is not possible. Now I write to them but without any answers. ⚠️ WARNING ⚠️ Meepo has a bad customer service Finally I don't recommend this brand because if you have any problem you can't get satisfaction.
Did you only use the CNC bushing for the bottom kingpin of the rear trucks? I wasn't too sure if you had them anywhere else. Do you recommend getting more than one of those bushings?
yes i only had ONE on the entire board.. i think they come in 2 or 3 in a pack. so the more u use them, the more stability u will have. but it will probably sacrifice a bit of carvability if you use more.. try it out!
@@esk8unity I now have the rear CNC bushing set up on my Ranger X2 board and now constantly hit full speed without realizing, so will definitely add it to the hurricane when it arrives.
@@esk8unity the whole gearing thing is getting me confused... because typically smaller gear will get you higher torque/acceleration but lower top speeds... is there a guide online to learn more about belt drive gears?
@@XTRUCASE do you by chance ride a bike? It's the same concept as the rear cassette. Since we are talking about the amount of teeth being proportionate to size of the gear (attached to the wheel)....the more teeth you have, beefs up the acceleration but decreasing top speed. By taking the pully teeth size down to 29T...you will not accelerate as fast; but will have higher top speed.
@@alvinr8694 if you ride mode 2 which is 22 max, I bet u will get 40 easy. Prob 42 to 43 in nice weather. I'm 225 and I get 35 to 37 mode 2. Mode 3 for you is prob around 38.
Hey so Ik you’re probably not gonna see this but it’s worth a shot how did you pair your hurricane with the ride app?? I’ve been trying and it just doesn’t work for mePlease it would help a great deal so I don’t over charge my board at night
40 mph👀 Wow. What do you think the top speed would be with 40T pulleys and 280mm belts? That is what meepo sends with their 120mm cloudwheels on their site. Great video btw
I am imagining what my body would be like if I came off at that speed 😭 I'm happy with top speed of 30mph so would change the gearing for more torque and acceleration 👌
@@Catamount19 Yeah I'm not really a a fast rider anyways. I just kinda like to roll along and carve a bit. My average cruising speed is probably 16-18 mph. Do you have a Zeus? How long did it take to arrive?
guys keep in mind, im BLASTING through gear 4 the entire way.. towards the end of 2 bars, i went back to that straight away and kept blasting high speed over n over again. im not a speed demon either. so if u cruise in mode 3 and dont ride on grass and carve as much as me, ull get 20 miles plus. for sure
Can you add the metric system to your top speed ange text please. No offence but I think it's funny that you says miles and then switch to metric and say 120mm. 😜. Other than that you've got the hottest boards everyone's tryna make their minds up between.
Best E skate channel. Just keep doing the same style videos. Go for a ride good music. You are the only one doing it.
🙏🏼🙏🏼🙏🏼🤙🏼🤙🏼✔️
This video definitely deserves a thumbs up! Thanks for providing a solution to the Hurricane's potential high speed woobles using the exway washers and disclosing the better pulleys. I was on the fence about the Hurricane bz of the low clearance and fast speed with the inherent woobles from double kingpin trucks but now I feel that issue is remedied due to this video! I was thinking of going with the Propel Endeavor 2 for ruggedness n stability but its way to expensive and I am mostly a street rider that hits train tracks n rocks n debris sometimes at high speed!
Wow, like to watch, how you ride / carve the board, its really a pleasure Fred
🙏🏼 🙏🏼
You make it look so easy @2:30. Amazing footwork while riding. Wish I can get that good !
This video sold more hurricane boards than any other video
Dude can skate. Hurricane is now top of my list over diy, parts are sold out everywhere anyway.
I like the DVRST background music. Fun music to chill and skate with.
6:00 When i watch some other tubers vids they don't seem to use the strap, but like you said its kind of a life saver to drop it. On hub motors you can keep rolling like a real board and use your foot break. I Got 120mm on my meepo V3, it was a pain in the ass removing the polyurethane but once installed gained so much traction on back alleys, beach paths, gravel paths and rough roads withouttoo much vibration, its almost like surfing but on land.
It would be cool to see a side by side race using the stock pully and 29T for an acceleration comparison. Do you lose a lot of torque and acceleration switching to the 29T?
Thanks, ive already my 120mm cloudwheels. Just waiting the board!
I appreciate your comments on bushers too
Your tip of dropping the remote is easy to forget. My thumb has a mind of its own when I'm adjusting stuff. Nearly came off several times. Every time it happens I remember your tip!
im glad someone appreciates that! lol 🙏🏼
Definitely getting this board and the (29T gear from BB). So sick!
Who's BB?
@@XTRUCASE board bumpers
aah ordered mine 3rd of this month, so eager to get mine to the roads. Looks so great! keep on the good videos!
God damn thats 65km/h more than enough for many riders. How the fck your board can go that fast while you are having balls of steel giving that much of weight?:Ddd
Do u have a tracking number for yours yet? I ordered mine on the 11th
@@deanh3678 Hi Dean! Yes I have! It was shipped/transitted 19th of this month and then I received the code. It was handed to DPD (transit company) on 16th. There might be still tons of orders bc blackfriday just keep tight brother!
@@thepega97 did you do fast air shipping or sea?
@@TraxxasJr I have to say I am not 100% sure. First I ordered with sea shipping. Later i wanted to upgrade to air and messaged meepos custom service about it talked couple days. Just got message that i have to pay extra 400$ but no thing where lol. Asked about it but didnt get answer anymore just the confirmation of the sended board. I think it is shipped by sea. I am also staying in north-Europe it might have a difference!
I really love my Meepo 105s but damn these look fun!!
Sick video 💪💪. You got a new subscriber.
Love the video. 40 mph!?!?!? You’re insane bro. But great coverage looks like a lot of fun! Cant wait till mine comes in!
Excellent choice in tunes, flowed perfectly
Can you tell us about the Hurricane remote settings : it was possible to select your custom 29T gearing ratio (in order to display the right speed on the remote)? is it possible to select a speed limit?
insane speed , too fast for me , learned my lesson the hard way...
also : you deserve far more subscribers! excellent content!
Do you out the exway washer just on that one back position you pointed to? Or is it on other position too
Where exactly did you add the exway washer(s)? Only one at the lower rear king pin?
yep. u can put it on the bottom of the other kingpin for more stability.. but i dnt need that much
You can tell it’s fast when it looks fast on camera! Nice vid bro
Hey brother u picked up the exway washers. I have 2. Were should I put up. One front?one back? Boardside?Roadside?
thats ur preference brotha… my hurricane i have only ONE on the rear truck and its roadside. u might want more , or u might like it. i use one front and rear on my hadean because its flex and dkp combination is very carvy and lots of rebound.
What bushing setup are u using for the hurricane
Thanks, now I gotta get cloud wheels for the Hurricane 😆. Cheers to the 40mph club hahah
I hope you're not underestimating how brutal it's going to be hitting the ground at that speed. Get some motorcycle armor!
Yo homie what's the name of the song at 2:50?
Did you install the washer only in thr rear truck? Or replaced the front as well?
WooooooWeeeee! 40 freakin' mph! That's insane esp for an off the shelf product!!! HOOOOLY! Are the Hadean ppl up in arms or running to the safe space in terror! Sweet bro, thanks for the vid!!! A1
Could probs get 35/36 from the Hadean in a similar set up.
Did the increased top speed esc upgrade interfere with the bottom end torque launch power at all ?
I would like to see the hurricane's top speed with the 23t pulley. Do you think it will hit 45 MPH?
maybe. ill try soon 🤩
ok, let's not kill the dude....i think 40mph is sufficient...hahah
Hello new sub cause this channel is so good but I ordered my meepo today because of this and now I’m finding all negative/shipping/service posts ..I’m ultra paranoid now can someone provide some insight or maybe back in the day they were probably not the best but are good . Thanks :) friendly Canadian neighbor gonna use it from my igloo to work lol jokes
Is there anywhere you can get those Exway Washers except the Exway website?
“array washers” makes something similar on Muirskate.com
Were the stock meepo belts compatible with the new pulleys? Or did you have to order different ones.
i just used the 29T belts the pullies came with. i doubt it’ll work with 32T belts
29 really helped the top speed out. Wonder what the top speed would be with 29t on the Zeus?
ill do it with 23T next 💨
Maybe even less then in stock because of pretty low torque.
@@esk8unity did you do that the hurricane or zeus? thanks so much! hehe
@@itsbrianchen so i did 23T to the zeus. didnt do anything. the way its geared and built, wont help the top speed.. only time i dont suggest board bumpers. not for the zeus.
@@esk8unity really! thanks so much. How about hurricane with gears? like 23T or 29T or 40T?
If it is true.... crap. I could've bought the hurricane when they had a deal (like $1300?).
What would your top speed be with a 32t and these wheels? 35/36?
How much torque did you lose with this setup? Wonder if 105 clouds would help extend range and torque for going up hills.
What kind of helmet is that?
What size belt are u using w that exact setup brotha please
29T pully from boardbumpers and matching 29t belt (240-5m) hit up my boy jacob at boardbumpers
@@esk8unity thanks my brotha
Remember when you used to skip stones as a kid.... im pretty sure that's what the human body would do on the road if you came off at 40mph/64kph.... Eeek, Big balls mate, great vid too 👍
Damn me and you have a very similar ridding style, nice to see a eskate review that can actually pull some tricks and slides, keep doing what you doing
Bro 40 mph!!! 🛹🔋🦾 dope video!
hey bro you dont have a discount code for Board bumpers? was gonna support and hope you get commission
unfortunately i dont. i appreciate it tho
Are the bearings the same size as regular skateboards? And do you recommend ceramics?
for the wheels or the pullies ?
@@esk8unity wheels
@@troygrooms5724 i recommend radeckal bearings on amazon. built in spacers. gold and black. there called Mamba
hadean cloud wheels video?
And boardbumpers has got some awesome stuff. I got my GTR crusin at 25-26 mph with there 56T pulley on my AT setup. Plus there belt covers and smashguards are super cool
Now you're talking my language buddy. Sick speed and nice skating bro. 👍 - William
What I really like and one of the reasons that made me want to subscribe to your channel is the very special atmosphere that emanates from your vids.
It's true, as you say in another vid, you're not the best when it comes about specs details and explanation, etc, but the atmosphere in your vids is certainly better than other youtubers that are very technical and encyclopedic but a little annoying like Daniel Kwan, I dare to say this.
I have a question I really burn to ask you : I enjoy watching you dancing on the board in your vids and I would like sooo much to learn this.
Can you tell me what is your cruising speed when you do longboard dancing ? And what is your max speed ?
Does anyone know the range of the atlas 2wd
Which one is more powerful Hadean vs Hurricane
Hey brotha, I'm getting 15 miles tops on the same exact setup on a brand new hurricane. I'm 170,flat terrain pretty much. Speed mode 4 aggressive riding. Do u think there's a problem with my range. That seems like no were near enough miles. Please lnk. Thanks alot for everything. Those exway washers maje world of difference
good im glad they help ya!!! un ya 15miles on clouds is wayy too little of range. contact meepo
I’m 225lb, aggressive riding on cyclone 165s wheels and get like 22/23 miles. 15 is way under the amount you should be getting
The link is wrong in the description.
fixed. thank u
So with those pulleys what are the differences? I kind of wanted a stock board with cloudwheels video?
Where did you get the belts from to match the pulleys etc what do the pulleys do? Decrease torque and increase top speed?
so cloudwheels usually come with 40T pullies.. i wanted to try something closer to there stock 32T street setup:. i don’t think theres any 32t abec style pully except evolves which dont fit cloudwheels.. so i used 29T abec.. more speed. suppost to knock off some acceleration power but i didnt really feel the difference.. board bumper also makes 36T abec which will be a GREAT medium for this setup..
@@esk8unity what do you think the top speed of the 40Ts would be? Even just an estimate?
@@esk8unity thankyou for the reply and explanation 😁
@@NatesEscape probably 28-30mph
Ok guy's i get the meepo hurricane after 2 month and half waiting...
I get bad surprise when i open the box, the belt guard was broken and one wheel was deformed and had a flat part what is dangerous.
I wrote to customer service to explain and asked for new tire and belt guard, Bonnie write me and tried to say it is my fault not them, I am liar, I broke it...
I took pics and videos of broken part to show Bonnie that I didn't ride yet with it.
Finally after more than 25 message she said sorry and tell me they will send me belt guard but nothing about the tire, she said I have to repair it what is not possible. Now I write to them but without any answers.
⚠️ WARNING ⚠️
Meepo has a bad customer service
Finally I don't recommend this brand because if you have any problem you can't get satisfaction.
wow didn't know production 23t pulleys existed haha guess I gotta pick one up too... 40mph should be fun hahaha...
Smashing it atm
Did you only use the CNC bushing for the bottom kingpin of the rear trucks? I wasn't too sure if you had them anywhere else. Do you recommend getting more than one of those bushings?
yes i only had ONE on the entire board.. i think they come in 2 or 3 in a pack. so the more u use them, the more stability u will have. but it will probably sacrifice a bit of carvability if you use more.. try it out!
@@esk8unity I now have the rear CNC bushing set up on my Ranger X2 board and now constantly hit full speed without realizing, so will definitely add it to the hurricane when it arrives.
@@RogerEssigArtist happy to help 🙏🏼
What app are you using to track your speed?
Ride app is what most ppl use
over 40miles per hour/ 60km/h ... omg :) great video.
What belt size did you match up with the 29T pulley?
240
@@esk8unity the whole gearing thing is getting me confused... because typically smaller gear will get you higher torque/acceleration but lower top speeds... is there a guide online to learn more about belt drive gears?
@@XTRUCASE do you by chance ride a bike? It's the same concept as the rear cassette. Since we are talking about the amount of teeth being proportionate to size of the gear (attached to the wheel)....the more teeth you have, beefs up the acceleration but decreasing top speed. By taking the pully teeth size down to 29T...you will not accelerate as fast; but will have higher top speed.
@@UrbanSniper308 thanks for the explanation.
Very nice video bro 👌 I prefer my cloudwheel on my BlackCarve 2 😉
❤️🔥amazing ❤️😍😘
What kind of range are you seeing on the Zeus with the 120 clouds? You are literally the only youtuber that is able to give me insight on both boards!
What is your weight? Lots of hills or pretty straight riding?
@@Catamount19 175 lbs pretty flat and I like to carve! Thanks
@@alvinr8694 if you ride mode 2 which is 22 max, I bet u will get 40 easy. Prob 42 to 43 in nice weather. I'm 225 and I get 35 to 37 mode 2. Mode 3 for you is prob around 38.
@@Catamount19 Thanks! Seems like the Zeus gets around 50% more range than the Hurricane
@@alvinr8694 best 2n1 board for range out right now under 2000.
Hey so Ik you’re probably not gonna see this but it’s worth a shot how did you pair your hurricane with the ride app?? I’ve been trying and it just doesn’t work for mePlease it would help a great deal so I don’t over charge my board at night
40 mph👀 Wow. What do you think the top speed would be with 40T pulleys and 280mm belts? That is what meepo sends with their 120mm cloudwheels on their site. Great video btw
Wondering same thing.
Guessing 32 - 35mph, dependant on weight and gradient. You can get the 29T Gear from Board Bumpers for 40mph
@@contorta960 yeah I saw. Just curious if you bought straight off meepo website
I think they geared it to hit 35mph.
@@contorta960 for some reason I've always thought the higher the teeth (larger gear) the higher the speed?
What app is that ? Is that the Meepo app?
“Ride” app
40mph on less stable dual kingpin trucks is Just insane.
And people say double king pin trucks aren’t stable. If setup correctly you can comfortably sit at 30+ mph.
Anyone ever order from EBC Electric Board Co?
yes. a exway flex
Dope video
Great review and riding. I’ll be back.
Smooth riding.
Breh that walk you do while riding is the most girl skate trick iv ever seen🤣
That sport coat was boss, trademark*
Don’t over-tighten the bushing. Use harder bushings instead
I am imagining what my body would be like if I came off at that speed 😭 I'm happy with top speed of 30mph so would change the gearing for more torque and acceleration 👌
It’s a nice board but range is kind of sucks ! Good video!!!
My friend got 40 miles out of it with the orange wheels
Man I way 50lbs more than you. Doubt I would be able to hit that jucy 20miles of range consistently. Thanks for the test! Zeus it is I guess!
Same. I'm 225 and the Zeus is the answer. It lacks the torque of this board but it lasts longer even for heavier riders.
@@Catamount19 Yeah I'm not really a a fast rider anyways. I just kinda like to roll along and carve a bit. My average cruising speed is probably 16-18 mph. Do you have a Zeus? How long did it take to arrive?
@@NickDelDuca yes, 2 weeks with air. I got mine when it first came out.
guys keep in mind, im BLASTING through gear 4 the entire way.. towards the end of 2 bars, i went back to that straight away and kept blasting high speed over n over again. im not a speed demon either. so if u cruise in mode 3 and dont ride on grass and carve as much as me, ull get 20 miles plus. for sure
@@esk8unity So you kinda consider this a worst case range test?
Cookin’ 😱
Now you need to find a very very steep hill and show us what happenes on pulley with max teeth :-)
Can you add the metric system to your top speed
ange text please. No offence but I think it's funny that you says miles and then switch to metric and say 120mm. 😜. Other than that you've got the hottest boards everyone's tryna make their minds up between.
Cloudwheels are identified by their mm just like rims on vehicles are always in inches.
40mph is insane. 40mph on DKP more so. LaCroix riders will be like "what the hell did I spend all that money for?"
😂
did you really compare this to any lacroix board? lol enjoy death while going consistently at 40mph+ on dkp trucks and mid tier board
@@Enhanced94 practice practice practice!!! and have u ever riden a lacroix?
@@Enhanced94 No. I was joking and didn't expect anyone to treat it as a serious comment.
i think as a new viewer the blinking effect ruins it
40mph?
Fuuuuckk me that's fast
Ok same setup, but use the Zeus 😈
Prediction, the Zeus doesn't send enough current to the motors to get to 40 mph with this setup.
first!
To be honest the up close carving made me nauseating
Hell yea