Assembled a device for spitting out plaster
Вставка
- Опубліковано 15 січ 2018
- I made a homemade stucco sprayer.
Internal replaceable nozzles with a diameter of 2 mm, external exit opening of 16 mm. Distance between nozzle and outlet 30mm, used air pressure 6 bar. - Навчання та стиль
I like how you show your device first thing, no intro, and heavy metal. excellent
Great workmanship. Awesome work.
Excelente video amigo! y muy buen trabajo!!
Nice creation, Brilliant Idea. Good job.
Absolutely fantastic!
Absolutely perfect!
Very very good job 👏👏👏👏💪🔨🔧👏 💪👏🙌 yes yes best job Merci beaucoup pour votre méthode simple et efficace
OK, I have made a few of these mortar sprayers, for the jets I drilled out the back of some grease nipples and bumped out the ball bearing (they make excellent air jets and easy to replace if needed), for the sheet metal I used sheet steel off old washing machines, as you might guess I am always looking for the cheapest way to make things without sacrificing quality. I forgot to put in some sizes, so here they are, after removing the ball bearing from the grease nipple (jet) drill it out with a 1/8 drill and give a 1 1/2 clearance from the jet(nipple) and the front of the sprayer, the holes in the front of the sprayer are 3/4 of an inch. Cheers mate and keep up the good work.
Hey, thanks for this info. Do you have a photo and the specs for the bucket itself? I want to build one. If you do I will highly appreciate it.
love your video.. great job
I was thinking of what are de spec you've choosen for the diameter of the holes, nozzles and the distance between them and you put it directly in the description !
Thank you very much ! I will try to do mine with 3D printer ;) !!
I really want to make this...is there anyway you can provide us the full video with detailed description. Also what is ratio for sand/cement and water to be used for this to spray consistently. I really love your work
It's got to be better than spending 8 and a half grand for one of those rendering machines so respect for that!!!
Thank you for sharing. Please, what kind of ar compressor to use with this? How is the air consumption?
You're amazing bro keep it up 👍🏻
Hello ! I would like to know what size the screws made from the nozzle, the distance between the nozzles, the diameter and the length of the pipes. (pipe with nozzles) Thank you in advance !
I liked it a lot.
A must've for every mason.
Bien !!!.
Fabulosa creatividad.
what compressor did you use for this? What is the liter / minute efficiency?
fenomenal
Genio ..sos un genio ...excelente video...me salvaste de gastar $ 2500 ...gracias saludos de Argentina!!
Can i use this tool for traditional 5:1 sand:cement plaster.
Buen trabajo saludos desde mexico
Very nice sprayer
Could you give us the size for the body? ?
Wich screw size use it?
Excelente video. Felicitaciones.
Zaje fajna robota i zaje...ta muza do tej roboty
wish to see you got 10k sub
Soy de Argentina buenas noches, que creatividad es algo que sorprende a todos aquellos que quieren tener sus herramientas, es utilizar los recursos disponibles y un poco de ingenio, usted con sus ideas puede cambiar parte de la sociedad de este mundo en especial a los que quieren creser.
You're a fucking Genius man!!! I love your videos!! regards from Argentina!!
Hi. Thank you for your video. It's great. What size of hose do you use??
If you mean diameter it will be 8mm.
very nice thank you
Nice one, as always. Good luck.
God job. I need it but with reduce external exit opening to 8mm for glue. If it will be from inox will be better to cleaning .Pozdrawiam
De todas chapiscadeiras que eu ja tinha visto a sua .foi a melhor de todas .parabéns. meu amigo🙏🙏👍👍👍😄😄😄
Muito top , perfeito , melhor que muitos que agente encontra nas lojas 👍
My question is how you had added air pressure so it can work
Amazing work, I looove this kind of project! Best DIY video I saw today.
Thank you!)
Wow really amazing and great idea appreciate.
TU ERES UNA ESTRELLA HACIENDO TUS HERRAMIENTAS. FELICIDADES
Отлично! Без трепони лишней все по делу!
Se me ase exelente y fácil de Aser,,lo más difícil el la calibración de la s esperas por donde sale la presión de aire y a que capacidad de precio. TE AGRADECERIA LA RESPUESTA gracias desde mexico
How is it possible to record the measurement of yellow iron
Very nice !!!!
Каков диаметр отверстия воздушного отверстия и отверстий для выхода бурового раствора?
perfecto,solo tengo que comprar la maquina torneadora y una planta para soldar y listo.
Y como cuanto volumen de aire ocupa (cfm) ?
Nice
good , thanks alot
Nice tool good job
Very good job félicitations 👍👍👍
Fantastic 👌
✌️🔧👍💪👏🛠,un 10 y la🎶🎵🎼🎸🎸🎸y la música chapo,saludos desde Spain de Jose
Is it for sale? Or could you make another to sell?
What is the type of welding machine he is using? seems pretty easy to use.
great job sir, i wanna ask you how much pressure this tool need, i can afford an 8 bar pressure , is it sufficient for the job ?
8 bar will be enough, the compressor should produce at least 180 liters per minute, otherwise there will be forced breaks in anticipation of the desired pressure in the compressor.
i tried to make one , well i finished it but it doesn't fully work, it eject the ciment but not at a good range and it sprayed in 3 narrow lines, if you have time can you give me the exact measurements you used for yours, caus i think mine is faulty because of the distance i put between the air exit and the ciment exit also the diameter of the air exit , sorry for my english, thanks and keep up the great work
Cool idea fabulous
super nice 👍
не плохо , но почему нет характеристик компрессора?
What diameter of tube did you use?
It was very useful for me. But can you please give us some more details about all the specifics that were used in this project like what all you need and the measurements and dimensions and stuff. please.
Read descriptions below title
Read the video descriptions
Good job thanks
Bravo👍👍👍
Muy buen video regalame las medidas de la distancia de las salidas del aire o toveras
nice job man :) can you give me plan or measurements
thanks :)
They are in the description under the video
Awesome! Could you tell me whats the size of the hole through the air come out? Sorry by my english
You can find the main dimensions in the description under the video)
Amazing
Au top par contre c est honteux de mettre des like en bas car il mérite des likes haut car c est un bricoleur de génie beau travail
hola le saludo desde colombia soy jose.y me gusto su trabajo que verraquera ,muchas gracias por compartir .estas nuevas herramientas y su forma de fabricarlas
buna ziua, daca dispozitivul are 4 diuze de aer de 1,5 mm si iesirea materialului de 18 mm iar presiunea aer este de 8 bar , distanta dintre diuze aer si iesire material de 30mm _ va functiona ? _ multumesc !
Which air compressor will support for this tool.. or which compressor has been used for this tool ? Please reply
my compressor produces 390 liters per minute at 6 bars, I think 200 liters should do the same.
good job...What is the diameter of the air hole nozzle and the mud outlet holes?
2mm - 18mm
Thank you very much...
nice work too bad you're not my neighbor lol
Soft hands?
nice job.please
what's the distance between air hole?
about 40mm
VERY GOOD JOB, AND EFFECTIVE, I ASK YOU HOW MANY PSI DO YOU NEED? AND HAPPY NEW YEAR
6 PSI
Excelente trabajo
يعطيكم الصحة أهل سورية والله فكرة رائعة
nice
Parabéns olhando esse consegui fazer o meu aqui no Brasil obrigado
Дай погонять, на выходные)))
Nice job..! What pressure does it work at..??
6 bar.
Hello, if the device has 4 air nozzles of 1.5 mm and the material outlet of 18 mm and the air pressure is 8 bar, the distance between air nozzles and material outlet of 30 mm _ will it work? _ thanks !
In my case, for the work of a bucket, I came to these dimensions empirically. Perhaps your version will be also workable, only a test will show everything.
Saludos maestro buen video ,me darías los planos de este proyecto Quisiera saber las medidas ,👍
١
Bardzo dobra robota tez taka zrobie potrzebuje wytynkowac dom w srodku 👍🏣
Witam. Udało sie wykonać taką tynkownice?😀
Hello sir, can i get fully detail and measurement? What size of bolt that you use?
The main measurements are in the description below the video)
Adamınsın adam kral
Excellent work dear! Can u please tell me wt is diameter of pipe and material of pipe used. Wt size of screw used to make nozzle? Thanks dear!
Hi,my name is Harold Holguín I'mq firm Dominica Republic, I like you rvideo a lot,cuold you send me the dimentions that you used to make that one,I'll really apreciate,thanyou very much.
Guys please i need an answer do this machine can do the job of knauf gypse on the wall plastering with gypse i mean please any one see this comment answers me
what is the price in India
Mükemmel bir insan olarak güzel olmuş sizden ricamız ölçülerini paylasirmisiniz teşekkürler
Tabii ki, ana boyutlar her zaman açıklamada videonun altındaydı))
Its just a hopper on steroids
1:40 mm?
How big is the drill bit ?
Охеренно сделано +музон у нормальных пацанов на высоте 🤘🤘🤘🤘🤘🤘🤘
Hi
super
Hi, this machine is available in Hyderabad and ready for sale.we can provide 1 year of warranty with a fixed price all over india with no bargains......we can show the working condition of the machine at our work site and can train the people.All the spare parts are readily available
For more information
Bharath Krishna : +91-9866697963 ( whatsapp only )
Preetam : +91-9618068363 ( Calls & whatsapp )
привет, пожалуйста, у вас есть самолет для производства машины или если вы можете дать какую-то меру. Спасибо большое
How many revolutions should the compressor have?
For operation without downtime for air injection, the compressor capacity must be at least 200 liters of air per minute and an operating pressure of 6 bar, my compressor gives 390 liters of air per minute.
FULL PRO . 👍
Como puedo adquirir una erramienta
👍
Hi,
How to get one please