If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
You weren't lying, Wayne. Up until this part, this build has been pretty easy. Nothing really fiddly, everything fitting nicely...then we get this stage. All these pipes...wow. And just think: we've got to do all of this AGAIN for the other side!
WOOF!! Folks, I just finished Stage 32 of Pack 6 tonight and THEN I came to watch the Master Wayne. 31 was fiddly but 32? My advice to any other intrepid modelers is read ahead all the steps...I found that it was more logical to go slightly out of sequence when fitting the smaller bits. Ex:. Step 7, glue 32C after screwing 32D & 32H to 32E. And so on. (Same way Wayne did). Make it easier. (Edit):. Oh boy, we still have the starboard engine also. The Joy of Modeling. This is why I became an airline pilot and not a surgeon!
Just to expand on my post below, I went ahead and dry-fit both engines into their respective locations on the engine room floor for safe keeping. Plus, it looks nice....
saw a youtube video that showed that the first piece that was already screwed down to the engine room floor was going to need to be shimmed up just a hair to meet where the flywheel from the engine is. There will be a shaft running through it to engage the flywheel and turn the engine.
Hello the model just came to Greece and now this Friday that just past they released the pack 3 will the pocket watch and the poster come here to Greece in the packs or I have to buy something extra
That's a large big ship the Titanic. I watched on Jared Owen What's inside the Titanic? Was interesting about the ship. 👍🤗😀😁❤️💘Nice work on ship all the stages.
hey mate, what is that pen thing you use to dip your superglue? i usually use a tooth pick from your recommendation during my terminator build but i am more interested in something like that.
@@WorldofWayneUK so it's nothing really special then. I thought it was something high tech to use for gluing stuff. 🤣😅.. also am I the only one that misses the parts being packed in plastic and not boxes.. I usually use the plastic for my glue containers.
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
You weren't lying, Wayne. Up until this part, this build has been pretty easy. Nothing really fiddly, everything fitting nicely...then we get this stage. All these pipes...wow. And just think: we've got to do all of this AGAIN for the other side!
There's a chain in the back part of the Packaging for the pocket watch.
You are the best model builder on UA-cam
Thank you James
WOOF!! Folks, I just finished Stage 32 of Pack 6 tonight and THEN I came to watch the Master Wayne. 31 was fiddly but 32? My advice to any other intrepid modelers is read ahead all the steps...I found that it was more logical to go slightly out of sequence when fitting the smaller bits. Ex:. Step 7, glue 32C after screwing 32D & 32H to 32E. And so on. (Same way Wayne did). Make it easier. (Edit):. Oh boy, we still have the starboard engine also. The Joy of Modeling. This is why I became an airline pilot and not a surgeon!
😂😂😂
An Airline Pilot building a Titanic Model ...nice .. 👍... 😁
Just to expand on my post below, I went ahead and dry-fit both engines into their respective locations on the engine room floor for safe keeping. Plus, it looks nice....
saw a youtube video that showed that the first piece that was already screwed down to the engine room floor was going to need to be shimmed up just a hair to meet where the flywheel from the engine is. There will be a shaft running through it to engage the flywheel and turn the engine.
Looking good! The Engine Details in the last Stage . . . think a little Panel Liner might make it pop a little(?)
Hello the model just came to Greece and now this Friday that just past they released the pack 3 will the pocket watch and the poster come here to Greece in the packs or I have to buy something extra
great video Wayne liking the detail on this model.
That's a large big ship the Titanic. I watched on Jared Owen What's inside the Titanic? Was interesting about the ship. 👍🤗😀😁❤️💘Nice work on ship all the stages.
great video Wayne but still more fiddley bit to do in next stage
Another great video Wayne
That's a nice free gift.
Hey Wayne I'm just now starting on the second engine all of my pistons are moving all but one, what can I do to make it all run smoothly
Check the pistons are all bent the same way. Sometimes when you first run the engine one will flip
@@WorldofWayneUK Wayne my mind is stumped I did what you told me to buy that piston still won't move
and just think...you get to do all of that again for the other side! twice the fun!
😆😆
Love the detail on that! Looks like it was a PIA to do lol! Don't know if my shaky fingers would have gotten that done ;)
hey mate, what is that pen thing you use to dip your superglue? i usually use a tooth pick from your recommendation during my terminator build but i am more interested in something like that.
It’s an archamedis drill with a normal jewellery pin stuck in the end
@@WorldofWayneUK so it's nothing really special then. I thought it was something high tech to use for gluing stuff. 🤣😅.. also am I the only one that misses the parts being packed in plastic and not boxes.. I usually use the plastic for my glue containers.
@@AWF1000 Yer. We have this thing where one generation wants to save the oceans and kill the trees and another wants to do the opposite :D
I have to ask you aware that there is a chain in the back of the box if you take the part that holds the watch you will see a chain
Yep. I had to dig it out the bin lol
Are you going to get any of the bond cars
Oh yes :D
It is a pity that the kit cannot be ordered in the eu and the Netherlands
What's the hardest model you have built
Bismarck is pretty hard
What do you mean it won’t be available to much longer lol I get it threw Agora just not sure what you mean.
I think you won’t be able to sign up after June. This only effects new customers
Is this likely to be available in the UK soon?
It’s been in the UK for a while with Hachette Oartworks but I don’t know if you can still subscribe to it
@@WorldofWayneUK looked at Hachette. You can subscribe from issue 29, but many of the earlier issues are out of stock
@@stephengleeson1263 then unfortunately it’s too late u less you can get older mags from somewhere else
how much does it cost?
Did u already finish the titanic?
Nope. Still waiting for next pack
It’s a pity they don’t supply you with a scale human figure just so you can appreciate the actual size of those engines.
Identical to hatchette partworks
How hard was that stage
Crazy hard. You do need a hood set of magnifiers
Wayne I just sent you a email. I don't know if I did it correctly. Please let me know thanks. Great video Wayne
I haven't got an email. Did you send it to wayne@worldofwayne.co.uk ?
I did Wayne that was the email now do you put Wayne then the rest of the email thanks
@@gunny1215 yer nothing has come through try this email worldofwayneuk@gmail.com
in my 27 number there was no pocket watch
And i thought, that engines from LEGO are detailed…