Great video! Came for some insight on repairing my center pin, same plow as you. Ended up staying for the comedic antics. Very well done and informative at the same time, thank you Sir!
I drilled and tapped (4) 1/4-28 grease fittings onto the bosses where the center pin goes through too hopefully keep it from wearing out the pin and weakening it to the point where it snaps.
I do wish my 9.5' v was smaller at times but guessing I couldn't justify buying all new yet. I would only imagine if they did it would add 200lbs to a 1200lb plow!!
I used to have a plow that used to snap them off all the ti'm I well Dan's back on then slide a piece of black eye and pipe ovbrett well dead on cut the hole out and after that the pistons did not break again
That was a hoot all the way through. I am curious if there is any correlation between shop soda consumed and plows broken. The rodeo ride was a great twist. Slightly disappointed that there were no explosives used. I have a bigger hammer if you ever need one.
Great video! Came for some insight on repairing my center pin, same plow as you. Ended up staying for the comedic antics. Very well done and informative at the same time, thank you Sir!
Sure thing! 👍
The side led lights on the frame.great idea.
Loved your video. Good work all around.
Thanks! I was happy to be able to salvage it!
Great video Bud! Very entertaining thank you I needed that
Thanks, the day it happened I was looking for humor in my life also!! 🤣
That’s some good carnage!!
1:39 nice truck. I saw it at Geaghans few weeks ago. Impressive work and use of material.
I drilled and tapped (4) 1/4-28 grease fittings onto the bosses where the center pin goes through too hopefully keep it from wearing out the pin and weakening it to the point where it snaps.
Your a hoot !!!!
Haha, thanks. Stay Cheap Cheesy and Crafty!
Crash and burn in the beginning and came back strong. Awesome as always😁
Thanks man. This shop project was unplanned!
You lost your mind on this one!!! You should start an annual MPRA event... only because I want to see what kind of monster plow you'd build for it.
If Fisher offered the xls expanding wings on their V plows would you buy it?
I do wish my 9.5' v was smaller at times but guessing I couldn't justify buying all new yet. I would only imagine if they did it would add 200lbs to a 1200lb plow!!
@@hammeredironworks7788 the 9.5 V weighs about 1000lbs withput the mount so adding 200 should be doable.
I used to have a plow that used to snap them off all the ti'm I well Dan's back on then slide a piece of black eye and pipe ovbrett well dead on cut the hole out and after that the pistons did not break again
That was a hoot all the way through. I am curious if there is any correlation between shop soda consumed and plows broken. The rodeo ride was a great twist. Slightly disappointed that there were no explosives used. I have a bigger hammer if you ever need one.
Hahaa! Thank you! Explosives are exciting... I will talk to my producer about the possibilities...