Bauer 20v Cordless Tire 0-160PSI Inflator - 1 Year Review (Harbor Freight)

Поділитися
Вставка
  • Опубліковано 18 вер 2024
  • I picked up this little tire inflator for about $25 from Harbor Freight. I am not sure how it stacks up to the Ryobi Tire Inflator or the Milwaukee M12 Tire Inflator or really any other tool system with one of the cordless tire inflators. I have had it for about a year and it's been a great tool for an 18v tire inflator.
  • Авто та транспорт

КОМЕНТАРІ • 36

  • @garymijangos9403
    @garymijangos9403 2 роки тому +9

    Purchased the same one and I love not having to pull around a air hose or a 12 volt cord . Because of the portability I love this tool easy to air up tires 👍🏾

  • @TickleBall
    @TickleBall 2 роки тому +4

    I own the Ryobi and Makita versions of this. The Ryobi looks very similar to this tool, and I feel the price point is correct. I don’t own any Bauer cordless tools, but I do own some Hercules cordless tolls, and am quite impressed w/ them.
    Also, your guitar music you included with your video on your chainsaw was really nice. Perhaps you could incorporate some more of that in your videos.
    Keep up the common sense practicality and good work.
    💪🏼💪🏼👊🏼

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 роки тому

      Thanks a bunch. Really appreciate the comment!

    • @gil6995
      @gil6995 Рік тому

      Just bought this. It is loud and slow. I also bought the 6” HF ratchet type bar clamp to hold the trigger closed (a must if you’re going to fill car/PU truck tires). Took a good ten minutes to add 20 psi to a truck tire with a 5ah battery. Good item for an emergency, I guess. My neighbor has the Ryobi version. I couldn’t believe how much quieter the Ryobi is.

  • @nickabel8279
    @nickabel8279 2 роки тому +5

    Even though I have ryobi. Hercules. And atlas I'm thinking about getting Bauer too. The heat gun. Inflator. And glue gun are very interesting...
    I bought that yellow tank too and have yet to put it together. I only bought it 4yrs ago though...

  • @Zombiereaper1
    @Zombiereaper1 2 роки тому +1

    This is the best test of thit tool I've seen. Maybe I haven't looked hard enough, but the reviews I've seen pretty much convinced me that it wasn't going to be very useful for car tires, which is pretty much all I would need it for. But holy crap you filled a 5 gallon tank up to 100 psi, clearly it will do the job, all my car tires are somewhere in the 30 psi range, it could do that just fine. I may just pick one of these up now, it would probably be more convenient for me than busting out my 120v air compressor which often pops the weak breaker in my garage.
    Also on the air tank, 5 may not be a great size for this, but you can always plumb them into an air system to give you more air storage, it's a quick way to up the initial CFMs your system can deliver.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 роки тому

      Thanks dude! Ya its a pretty good little tool. Not the fastest inflator in the world but useful for sure!

  • @PawOfRizzo
    @PawOfRizzo 2 роки тому +1

    I have this Bauer tool, and it is also one of my more often used tool. Have aired up bike tires, hand trucks, and my car tires to top them off. I like it so I don't have to drag out my air compressor hose for some quick air....and the portability.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 роки тому

      Exactly why I love this little thing. Thanks for watching and commenting.

    • @nickabel8279
      @nickabel8279 2 роки тому +1

      So for a tractor you got to air up every use this is perfect...

  • @TeamWagy
    @TeamWagy 2 роки тому +3

    For the button, I put a rubber band on the handle to leave it on until I reach my desired pressure for airing up tires.

  • @Tom-x3m9g
    @Tom-x3m9g 6 місяців тому

    It's better than the 50 dollar one. I bought both, because the other one shuts down before I can get a car tire pumped up. But I still use it on pool toys, great for that.The cheap one works better, I put a gum band on the trigger so I don't have to stay bent over. Tip for everyone.

  • @Charliemmafan
    @Charliemmafan Місяць тому

    I have this exact same tool and I can't believe how great it is especially for the price because I literally air up my own tires as well as a lot of other people's tires with it and most of the time just a few pounds but I have taken a few tires all the way from completely flat to fully aired up and it does get hot especially if it's hot outside but I just take breaks and let it cool off before I use it again and I think I only ran the battery down once or twice but that was after I aired up several tires with it and I don't know how accurate the gauge is cause I think it's a little bit off from other ture pressure gauges that I have but this tool is just one of the best especially for the price and I really don't even know how it works by just pulling air from outside and putting it in the tires I guess but since I've been using this tool I haven't even used my air compressor once ro air up tires because it's just so much more trouble in comparison.

  • @jordanwright4014
    @jordanwright4014 2 роки тому +6

    Your supposed to run it for 10 minutes and let it cool down for 15 minutes so you don't burn it up ones I have says 5 minutes then 5 minutes to cool down mostly them kind of inflators call for 5 minutes run time then cool down for five minutes I usually read instructions on tools lol

  • @slicktmi
    @slicktmi 2 роки тому +3

    The air tanks are good for brad nailers and other quick airtool projects so you don't gotta pull out the whole compressor

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 роки тому +1

      Hmm.. that makes sense. I plan to use mine as an expansion tank on my comrpressor in the future.

    • @slicktmi
      @slicktmi 2 роки тому +2

      @@DereksWorkshopAndProjects just get the 6foot air hose extension from harbor freight and thread it on with a quick connect and your good to go

  • @michaelderenne9838
    @michaelderenne9838 Місяць тому

    Nice! Im getting one today

  • @aaroninks
    @aaroninks Рік тому +2

    I love this tool, but the air Chuck absolutely sucks. I may cut the line on mine and splice in an LocknLube locking air Chuck. Thanks for the excellent review 👍🏽

    • @gil6995
      @gil6995 Рік тому

      I agree! I will do the same. Not sure whether to get the open or closed version though.

  • @RestorationAustralia
    @RestorationAustralia 2 роки тому

    Looks great, does the job well.

  • @jessecondit2211
    @jessecondit2211 4 місяці тому

    It was on sale today $20.00 gonna try it out.

  • @Mr.56Goldtop
    @Mr.56Goldtop Рік тому +1

    Nice review! A digital psi read out instead of a gauge would be nice though.

  • @pumpdump4476
    @pumpdump4476 9 місяців тому

    How about a velcro strap? Easy on easy off and you could hang it on the wall ect.

  • @maurice951
    @maurice951 6 місяців тому

    Would a 20v black decker battery work for it?

  • @raypalermo1603
    @raypalermo1603 Рік тому

    I thught it was 20 volts and does it lock on?.

  • @b1blazin13
    @b1blazin13 2 роки тому

    Thanks I'll buy one now

  • @andrewolmstead2549
    @andrewolmstead2549 9 місяців тому

    Does it come with a battery