Hi Dave. The reason they are using that simplified 6688 tube, is due to cathode area or (size.) Larger cathode area in a small vacuum tube means they will operate at lower Voltages ( providing they don't have to produce much drive power) They would have been better off to use a "space charge" tube and arrangement. A space charge tube is designed to work with 12 Volts on the plate. Enjoy your holidays!
+Jack neff Hi Jack. Space charge tubes were used in equipment when no high voltage was present (IE: late 50's car radios.) They use the space charge grid principal to accelerate electrons at low plate potential. They differ a little in operation from a normal tube... EG: The control grid is is positively charged to act as an accelerator grid. The screen grid is where you feed your signal to be amplified. The suppressor grid (if any) in some applications is also positively charged. The tube 12K5 comes to mind.
+Mr Carlson's Lab China needs to start making space charge tubes again if they are going to make things like this instead of sticking random tubes in a random circuit.
Unless...no...they wouldn't...of course they would, it's China, the home of cheap and electrocuting electrical ;-; *unboxes new amp wall wart, reads back* Class I Power Adapter Input: 100 - 240VAC 0.2A Output: 200VDC 0.1A
You brought a tear to my eye, I didn't know anyone still uses vacuum tubes. Back in 1959, when bits were flat, I went to a very good Engineering school we were taught vacuum tube circuit design. . Seeing the plate characteristic graph brought it all back. Immediately after graduation I went directly into computer programming.
Not trying to start a war, but I think putting LEDs under tubes ruins the look of them. The dim glow of a tube looks great on it's own, so I see no reason to overpower it with gimmicky, incredibly cheap looking lighting. On that topic, I personally think LEDs under nixie tubes should be considered a crime.
I agree, nothing like the soft glow of those tubes. blue...what the hell is blue doing in a tube? i grew up around that stuff. my dad was always fiddling around with that stuff. he was pretty good at it. i wish I had his collection of radio tubes and amps.
+Travis Piper Yeah, last time I saw tubes glowing blue it was a set of four EL34s experiencing The Who at extreme volume. The audience were happy but the tubes weren't.
What I want my audio to be is what is stored on the file on my computer. No coloration, no distortions, no filtering. I want to listen to sound the way it's intended to be heard, and what's on the file is what I want to hear. Note how I said *MY* sound, and not *everyone's* sound. Some people (actually, probably a lot) enjoy the coloration of a tube amp, or a specific EQ setting, or some tasteful deviations from what the sound file actually contains. That's fine, it's what they enjoy. For me personally, I would want an amp (really, a DAC-amp combo) because the headphones I have can't be properly driven by what I already have. Although I think we can all agree that _"audiophile"_ grade SD cards and Ethernet cables do absolutely nothing. I really wish that the term audiophile didn't have such a negative connotation to it. When I (and maybe other people) see 'audiophile' on something, it immediately triggers our snake oil detectors. Just thoughts :)
That is one thing I dislike about Windows and many of the drivers as there are so many forms of electronic distortion that can easily be added by the software drivers, if I wanted my audio to sound like it was music out of a well I would buy the cheapest speakers.
These things remind me of that one friend I had that re-ripped his entire MP3 collection into FLAC (from the MP3 files, not original source), telling me it was for 'better sound quality'. Biggest thing though, as with 'oxygen free' cables - don't engage with them in argument or present logic. *backs away slowly*
+MattExzy Well, using FLAC is not that stupid. You typically won't hear the difference, but when MP3 is used with a high compression rate, definitely will. You normaly don't run into space problems on your hard drive nowadays, so I see no point in not using loss less compression formats like FLAC. No need to say that oxygen free cables are ridiculous.
I had a long conversation once with some folks who SWORE that there's a difference in audio quality between FLAC, Apple Lossless, and Wave. I even encoded a source file into each, then back into raw PCM samples, and ran a binary compare on the result. The (totally unsurprising) result: 0 differences encountered. "Well, *I* heard a difference." sigh.... You can't save everyone.
I'm a musician and an electronics engineer. Tubes are not better for purely listening to music. I want to hear the music as close to the original as possible. Give me a low noise solid state amplifier for that. No filtering or "coloring". However, for guitars and basses, the tube sound is real! Tubes sound fantastic for their dynamic range compression and harmonics they add. Not ideal for playing recorded music at all!
I disagree tubes are best all the way around. I remember even an AM radio with tubes the sound sounded like stereo. Not the all American 5 tube radios I mean Atwater Kent and Zenith radios. they mainly used 6V6 or 6F6 amplifier tubes, even the rectifier made the sound better. The youth of the 80's and beyond havent heard the real Hi Fi sound only tubes can produce. I had an Admiral Record Player that used 2 6aq5's and one 12ax7 and a 5y3 rectifier and the sound was outstanding especailly when I used a 10inch woofer from an old B and W TV set. Tubes rule in good HI FI audio.
@@j.w.8663 the music is the same same songs we are talking about fidelity. I have and played the same records on both type of amplifiers and tubes win every time. Even the rock song seasons in the sun sounds better on a dynaco amplifier than on modern stereo equipment. My friend listens to rock music I don't as a general rule. I may have a handful of popular tunes I like but my main is classical music. Big band music was what I grew up listen to when I was young, I had a few years listening to 50's rock when I stayed at my birth mothers house but when I was really young like 3 years old my adopted parents listened to big band music. The classical music came into my life when I was 7 years old when I started piano lessons. I agree the over the air music was better then because you had a choice what type of music to listen to. The old Atwater Kent radio could pick up stations all over the country on AM. The tv antenna was also used for my radio I just used one side of the 300 ohm twin lead line. I don't remember grounding the radio. AM today has nothing to offer. You can get choices on the internet like you could over the air in the 70's. I haven't tried cds on my tube amplifiers yet because I need to recap my equipment, I just aquired a varac that my work gave me for helping unload a storage hanger at the local airport. He said he used the varac when he repaired tvs and radios.i will try it on some of my tube amps. I would never run on 125 volts the tubes need 110 volts for that was the voltage back then. I believe the best of both worlds will sound good. I will post later when I hook my cd player to the tube amps I will also try my computer sound on the tube amplifiers as well. They sell headphone tube amps on amazon and ebay, but I don't have that kind of money to spend.
Tubes/Valves adds presence to recordings, mainly because of even harmonics and soft clipping! Guitarists like overtones like the octave 5th’s , minor 7th’s etc - physco acoustics, Fourier analysis, Taylor series, mathematics way beyond my uni days!
I actually own one, and even using only two tubes, this fine little amp has the delightful, noticeable *soundstage* of a tube amp. I find that quality of sound unmistakable without dismantling it technically. The tubes also make it easier to notice where the musicians are located in space. So, it's a hybrid amp with a genuine tube ambience... Regardless of whatever its distortion may be rated at - and that's probably going to vary according to the tubes being used - I have personally noticed much less listener's fatigue... I have enjoyed this amp hours on end playing music that I usually avoid because it's not a warm or full, especially at the bottom bass end of the musical spectrum. The tubes add warmth and fullness and spaciousness of sound. But my initial impression is that I was amazing at the improvement of the soundstage that even my Grado GS1000 headphones could not produce. As a musician, this is the most fun I've had improving the sound quality and my entire library. So, I'm disappointed that the technician in this video apparently didn't actually describe the amp's sound before technically analysis it. The only analysis that truly interests me are by those who have the ability to hear the different qualities in the equipment they are analyzing, and I found that lacking here... This means saying right off the bat whether this or any other amp sounds pleasing to the EARS... or why bother going to the trouble of analysis it? In the meantime, I've ordered some NOS GE 6688 tubes that should make this little amp sound even better. It's the EARS that take over after the analysis ends. So of course the tubes are having their effect.
Subjectivist audiophiles just LOVE not talking about noise, distortion, etc. (IOW, objectively determining how good something is). It's all about using purely subjective terms like "soundstage", one of the favored buzzwords.
+Son of a Zombie It would give an indication of frequency response. Rounded slanted edges would indicate an HF roll off, sloping top and bottom would indicate LF roll off. Any ringing on the edges would indicate poor phase response and/or marginal stability.
Since the tube output is nearly the same level as the input, I would love to see what happens if you pull the tube and simply short from pin-to-pin - letting the op amps do all the work. If I'm reading the schematics right that should give a fairly good quality result. Probably too late since the video is from a year ago.
I have to say you are really good at explaining circuits. I was expecting to be totally lost with my high school knowledge of circuits, but I followed the gist of most of what you had to say.
Keep it up Dave, you're informative and fun to listen to. I'm old enough to remember when a TV or radio went on the fritz, pulling out all the tubes and riding to the drug store on my bike to run them all through the tester, then hoping that they had a replacement in the cabinet underneath. Also, TV repairmen who made house calls and always had a red and black RCA tube caddy. The good old days!
What would be SUPER AWESOME is for Dave to point us in the right direction with a link or 2 of some choices of TRUE tube pre amps that are headphone sized and or a little more powerful... Thank you for the great detail Dave top quality as usual, hope the masses can help you find some proper choices for us, Cheers !
Dave, I loved this bit. I've always been fascinated with vintage technology. I'd love to see more pre-transistor teardowns and explanations of how they work.
Biggest improvement is remove the 2 tubes and install 2 links from grid to cathode, and remove the cathode resistors. You save 2W of power and improve reliability by at least an order of magnitude and reduce the noise....... Of course if you want the valve sound leave the resistors in and use a 1N4001 for the link so it is forward biased and able to generate the lovely distortion with less power and noise.
+JinzoDefiler yeah, I'm an engineer myself (CNC programmer/operator), so I find some of his videos interesting. I do wish he'd do a couple more in depth power tool teardown reviews, not seen one for a while.. +AvE if you're listening? ;-)
+Bindo yeah, +AvE ! we need moar of teh BOLTR! He's not done an in depth tool review for ages now. That was the main reason that I subbed to his channel. I miss them. :-/
valves do have a different sound by them selves if used in a old school full valve job running at the full 160v with the beefed up components but as a hybrid its a wanking matirial just to say u got valves. I reckon valve should stick with valves and silicon should stick with silicon.
+John Ridley Agreed. I was hoping he'd just go ahead and jump grid to cathode across the missing tube socket and fire it up with a tube channel and the 5532 channel and compare the two. Take a bit of messing to set up to test it, but might be fun to see the results. And the reactions... If someone had gifted me one of those things, that's the treatment it would get. Make a decent headphone amp, the simplified way. (And chop out those LEDs!) Stu
"How can people possibly know this much about this 26 minutes long video 5 minutes after it being uploaded?" Because some of us are old farts who grew up using tubes.
Without getting into plate voltages and all, I have to say that tubes sound different than transistors. In my college electronics class years ago, our instructor said something to the effect that a good quality transistor amp will treat the odd and even harmonics evenly. However the human ear doesn't find odd and even harmonics to be equally pleasant. He said that a tube amp tends to "cheat in your favor" as far as doubling up on the harmonics that the ear tends to like and attenuating harmonics that are less naturally pleasing. I am so old school that I actually like the sound of a phonograph coming down on a vinyl record!
William Beckham, I wonder if your old teacher was correct......as I understand the human ear, it is just a series of tiny hair cells that respond to excitation by different sound frequencies. If that is true, would they be able to distinguish between the different harmonics? One note's 5th harmonic can be the same as another note's 8th harmonic, and how is the ear supposed to react differently (and one is an odd harmonic while the other is an even harmonic). Seems to me that a lot of audio snubbery is really just folks misunderstanding, or improperly applying, physical truths.
What pisses me off about this subject is that it is really subjective. I used to be a recording engineer, not a sound engineer or a mix engineer. My job was to capture the performance or sound source as close to original as possible. For this job you needed an objective ear, one that can pick out small imperceptible things that many other people would miss. A simple thing like positioning a microphone 20 cm to the left would change what was being captured and recorded. We would use expensive everything to monitor the recording. Everything from the mics and their cabling, the mixing desk, the headphone pre-amps and the headphones, no expense spared. The most expensive part of this chain were our ears. Myself and the guys I worked with could hear an aircraft or local traffic in a noisy concert hall, or on location we could hear insects that were going to tape but the rest of the crew could not hear until we pointed it out. Anyway, to my point... With modern equipment, and we can even include smartphones here. You are able to EQ or tune your sound to how you want it. 90% or greater of users don't know how to do this in any way close to correct. I have even worked with professional engineers that disputed the clear evidence from the expensive digital readouts and ended up screwing up the recording. When it comes to sound, every person seems to be a professional. And fuck valves. Whatever they did for audio can be simulated and tweaked beyond your imagination in software. Even down to adjusting the element temperature and the surface area of the grid and so on. Rant over. Nice vid Dave.
A true audiophile understand the importance of a good signal chain; which is even more important than which tubes you use (as for as those- I only accept a few specific models that were produced by Phillips in the late 60s (which I was fortunate enough to procure a stockpile of at auction after much searching), but I won't get into that). Everything that exists within the signal chain will modify the sound. I use exclusively analog hardware due to its superior accuracy, though I do make one exception: my record player happens to be a few meters from the rest of my equipment (which is in a specially designed cabinet to shield it from the earth's magnetic field), and to get the signal over there, the signal from my preamp enters an ADC then sends s/pdif using a custom white laser (merged and color-balanced RGB) through a rigid glass fiber and then received by a dedicated DAC and then tube preamp. This signal then either feeds into my tube power amplifiers that feed the main speakers (through solid brass, oxygen-free, shielded speaker wiring, terminated with gold-plated connectors (I find that the brass with gold plating doesn't give that "dulled vocal depth" in the mid-high range that you get with stranded copper), it is also fed into a second ADC, similar to the first one, which is used to carry the signal to a similar set of equipment for the rear of the listening room.
Awesome... until the Earth's magnetic field, then it goes off the tracks. White laser? All fiber is "rigid", glass is glass. You redeemed yourself with the gold-plated brass however.
Thanks Daveo! Enjoy your hols..... you've earned them! I was born in the valve era, and my first ham HF transmitter was a Hallicrafter, which kept the room warm in winter... but transmit frequency drifted all over the place. It was very good for an isometric work out when cleaning out the shack, though! I'm glad we've gone solid state, I got fed up of 180v DC shocks working on this kind of tech.
@eevblog Dave, one reason for tying one of the grids to the ht was to use it as a space tube, the low voltage ht, often just 12v. This was very popular in car radios before the proper dedicated low ht voltage tubes were developed for the car industry in the 50-60's this was short lived with the advent of more reliable transistors.
By the way I didn’t buy my one as a headphone amp, I use mine as a signal tracer, it’s a cheap way to make one with a good uncoupled input.. You also get a spare tube (or Valve if you are British) to play with, solder some wires onto the pins and you can experiment with it in triode and pentode configuration. You need about 90v to make it work properly, so rubber gloves are a good idea.
I remember I saw a schematic of a all-tube automotive radio receiver in which ECC86 double-triode tubes were used. They were designed to operate at low anode voltages like 12 Volts at the cost of higher distortion. In comparison to other car radios with vibrating voltage converters these tended to sound "dirtier", mainly because of that relatively low voltage. If you get your hands on one of those radios - that would be great. Worth of mentioning: in many guitar amps with tubes on input they use tubes like ECC81, ECC83, and so on (triodes) that are interchangeable, meaning you can swap one type for the another in most cases.
Hi Dave,wow cool to see you´re doin TubeStuff :) :) I love you´re sayin´ JFets with pilot lights....Great clarification for unexpirienced people! :) But in this case, the tubes running on "starved plate" configuaration in where the plate voltage is to low for a typical bias point, you´re finding in datasheets.... Therefore to let the tube at least do something you need to wire it up like how it´s done here... But as a cathode follower the tube will not add a "tube-sound". A cathode follower can´t do this, there´s no saturation. Instead it´ll go straight into clipping, just like any Jfet or BJT will do....
+mipmipmipmipmip Tubes, even crappy tubes, are more than capable of producing excellent quality audio. Even this one with a 1.6% specced distortion can most likely be coaxed into being plenty clean with a high enough voltage (which provides headroom) and relatively careful choice of biasing and impedance. The thing is though, transistors do all that stuff way better and easier and smaller and cheaper and less dangerously .. one of the only real uses I see for tubes these days is in guitar amplifiers, where the whole point is to slam the shit out of the tubes with insane gains and voltages, and really ride them past the edge of their standard characteristics. With all their analog goodness, the real fun comes when you mistreat them. The boring, linear region is not exciting and is better represented by transistors.
+TubiCal As MrCarlson said they would have been better off using space charge tubes. China needs to stop making random tubes and sticking them in stuff but building tubes designed to work on low voltage. Or they could simply use a tiny boost converter to generate the high voltage instead.
The equivalent tube to the E180F, which is special quality industrial tube is the 5A/170K, the 6688, or the CV3998. The 6J9P is originally a Russian standard-grade tube, 6J9P-E is the strengthened version, but it could be 10,000 hours type, instead of the 100,000 hours special quality tubes.
double blind testing done by the BBC showed that INCREASING distortion improved perceived sound quality . ....purity of audio reproduction. There is no such thing. Purists look down on things like tone controls in amps, yet overlook the many multiband eq's used in the recording process. And the many meters of non audiofile cables used in the studio :-) Will an audiofile 2m cable make any difference after the 20M of ordinary cable its gone through when recorded.. Perhaps Dave could test "audio' 240v amp fuses that cost $100's . People swear they make a big difference in sound. Just kidding, please dont.
When you're *producing* sound, you can use any method you want to achieve the sound you want, so using vacuum tube amps for recording purpose is fine. When you're *reproducing* sound, you should use whatever method produces the mathematically most-accurate amplification of the source signal, so you can be sure you're hearing exactly what the artist intended. That's why my home stereo uses a set of self-correcting JBL studio monitors with built-in digital amplifiers, rather than some ridiculous glow-in-the-dark vacuum tube setup, so I can hear my vacuum-tube-amplified rock albums with perfect clarity.
Supposedly 2nd order distortion 'harmonises' whilst 3rd order would be inharmonious, but I tried adding 2nd order using a plugin and it sounded dreadful.
the same with Tripath and some other amps, they ad distortion, but "good" distortion not the kind of distortion crappy Class B silicon amps ... there are of course good transistor amps, Class A, Class AB, even some good Class B amps ...
@@dcan911: Because they get to hear the master after the recording engineer is done with it, and request changes to the final mix. Or at least, _good_ musicians do that. I suppose Justin Bieber probably doesn't care.
If you are feeding in line level 100/500mV all you need to drive a low impedance headphone will be a current amplifier. Very little gain is required. If a valve only is used it will need a transformer to converts it's high impedance to the low impedance headphones. Which will lead to phase shift, more distortion and poor bandwidth ie a valve amplifier.
+Michael Beeny I fully agree on that. I built a simple transistor amp with small voltage gain, but decent current gain. Even at same volumes on the output, sound with the amp in the circuit becomes a lil' bit better (better bass)
+Michael Beeny Good transformers won't cut much subbass or introduce any appreciable amount of phase distortion in audio band either. Some people actually even build transformer coupled amplifiers specifically because they're easyto make. The downside is mostly weight and output impedance - in audio applications.
It’s all to do with even harmonics and soft clipping that valves/tubes bring into the sound! Guitarists love it as it brings out overtones from the vibrating strings- octave, 5th’s , minor 7th’s etc . long sustain notes using feedback near the speakers! Listen to Brian May on Queen recordings, he uses many of these natural effects! A valve pre amp with a solid state power amp gives pleasing effects also and the music gives a feeling of presence especially in the bass and mid range! I used to own 2 Leak TL50 power amps with point one pre amp! Wow what a sound-like the musicians were in my living room live! I sold it off stupidly as new KT88 valves were getting too expensive! I think you are about £150 now for a matched pair! A small valve pre amp into a Fet power amp seems like a cost effective solution to get a decent response from medium sized domestic speakers!
A headphone amp doesn't need much voltage gain, and you *can* do it with just a 5532. But better is to have some extra current output for low Z cans. Running a triode/pentode at low voltage is fairly common in products where they just want the "valve sound" - the low volts if helps the typical distortion sound. You could have just pulled the tubes to see if it still passes signal, and saved a bit of time. ;-)
I did not expected a cathode follower design for the "true tube sound"/"distortion". Also as @Dave and datasheet said, you will need at last 160V B+ for that :)
Yeah his actual tear down was more or less just opening up 3 of these kind of tube/valve headphone amps and showing the boards. But then again he said he's not an electronics expert, which is ok.
19:52 I'm no expert in tubes, but I can see right away that if this tube were biased as the datasheet says to do it, the tube power would be 160V * 16.5mA = 2.6 watts. Times two because this is stereo, and you're talking about a lot of power. Now try to generate that power from a little tiny boost converter powered off of 6V. You need a hefty >200V filter cap for the boost (read: $$$), too. It's much harder to fully bias this tube for this thing than it might appear, which is why they adopted a very simple ±12V rail system. Otherwise, the power supply would have been more expensive than all the other circuitry combined. So it's okay to bias a tube filament with a DC voltage?
The quick way to test if the valve did anything would have been to yank the valve out and see (hear) if anything came through. In this case nothing but linking pins 2 and 3 (grid and cathode) would have restored the audio with probably very little difference in audio quality. When you first showed the video of the inside I wondered where the HT rail was because only 16V surface mount electrolytics were visible then I noticed the radial electrolytic and thought that must be across the HT rail. It turns out that the HT is only effectively 24V (± 12V) so the 16V capacitors are adequate.
i would love to see you do the same thing for something like a Fiio E10K now, great video Dave you answered the questions i had about tube headphone amps
***** since i started seeing those headphone amps with tubes lately ive wondered if they really use the tube or if its just bs and now i know its basically just bs lol
The whole point of a tube amp is to get distortion. Of course conventional solid state or discrete amps will perform better. Honestly, this product doesn't appear to be a rip off at all. I am not into tube amps, but for those looking for the tube amp distortion on their signal path this is probably a cheap way to get there.
It needs rare earth metal coating on the valve sockets to be any good, How did they miss that? Top Vid, never knew valves would work at such low voltages.
+Mike James 24 Volts, or even lower, is not unusual. It's basically a myth that ALL tubes/valves needs hundreds of volts to work. Many will and a few won't. How well is another discussion.
+digitalradiohacker You beat me to it, I was going to mention the importance of oxygen free power cords because that 60Hz hum is so much more enjoyable with an oxygen free power cord inserted between the receptacle and transformer! And I love the whole notion of "audio grade" digital interconnect cables (HDMI, Ethernet, etc.) and flash memory devices. Some of the claims made by audiophools are so outlandish they really should be criminal. That said, those that want the "warmth" of tube amplified sound are welcome to it as far as I am concerned (there is absolutely nothing wrong with preferring a certain sound -- we all have our likes) so long as they do not simultaneously tout the tube amplifier as being distortion free as the very warmth they desire is the product of distortion.
You know the funny thing about an "oxygen free" power cord? The owners never worry about the wiring in the walls of their house. Or the the power cabling to the house. Or the the nonlinearity of the power transformer on the pole. Or the . . .
Yeah, there are no rare-earth metals with better electrical conductivity than gold-plated silver. (the gold plating is only to prevent corrosion; gold actually has lower electrical conductivity than silver.)
funny times we have you explain what tubes are using jfet analogy. i'm quite young, but still 25 years ago in early ground school I remember reading my father's electrical engineering school books and I was learning about lamps. i always knew more or less how BJTs work. but only last week I learned about JFETs :D
My rant isn't so much about the gimmicky use of the tubes (valves), but the overuse of blue LEDs. Why are blue LEDs used everywhere !? I'm old enough to remember when blue LEDs did not exist. You had red, yellow, and that ugly lime green, but no blue. Cree made some SiC blue LEDs in the mid 80's, but they didn't go far. It wasn't until superbright blues, made of GaN came out ~1994, then blue was everywhere ! But that was 22 years ago, so why still the frick'n overuse of BLUE !? Reds a nice color. Amber/yellow even looks classier. With GaN, they now have really nice green, too. And orange is one of my favorites. When on, it looks like candy. You almost want to bite the LED. Though orange, may not be a good choice under a orange glowing filament. But screw the blue ! Its also harsh on the eyes.
Michael Moorrees The blue glow produces a "visible illusion" of power. If one were to see a high-power broadcast transmitter using vacuum tubes (e.g. the transmitter of any 50kW broadcast station before about 1980), a blue glow would be visible, along with the brighter orange glow of the filament, simply because so many electrons were flowing so fast with traces of other gases in the tube. Ironically, a blue glow in a receiving tube indicates that the tube is weak - that too much gas has accumulated in the tube.
honestly?... they have to do me a favour:: OR!! they start using white leds as indicators in devices with more that one indicator, OR!! i'll be happy with blue as well.... i don't see any major difference between the colors they use, i mean -greenred -redgreen -yellowgreenred -thatususalcolorusedtodrivedaltonicscrazy :D screw lan cards and arduinos!! i'm a proud daltonic!! :D but i agree
I'm old enough to remember when LED's were very small dots only on watches and calculators, and when the LM741 originally came out and sold for more than $10 each. Also 4 function calculators were over $200 and had a green display.
Thanks for the vid Dave. I was shopping on Ebay and bought a 6J1 preamp kit which I thought I'd play around with. Still waiting on it, but I reckon it's probably a similar design except they run it direct off 12VAC from what I can see (no dc boost) and 6J1 toobs. At least it was only $10. I don't know how much this puppy would set you back
In the audio industry people pay large swaths of money for tube-based amps (especially guitar amps!) because it seems using vacuum tube valves instead of transistors as amplifiers delivers a much "greater" and "smoother" sound, whatever that means... so far I've been unable to notice any difference, except in the price tags.
When you're *producing* sound, you can use any method you want to achieve the sound you want, so using vacuum tube amps for recording purpose is fine. When you're *reproducing* sound, you should use whatever method produces the mathematically most-accurate amplification of the source signal, so you can be sure you're hearing exactly what the artist intended. That's why my home stereo uses a set of self-correcting JBL studio monitors with built-in digital amplifiers, rather than some ridiculous glow-in-the-dark vacuum tube setup, so I can hear my vacuum-tube-amplified rock albums with perfect clarity.
I've been banging my head against a brushed steel amp fascia with some audiophiles on this issue - can't wait to share this onto them!! This rocks Dave!
The "warm" tube sound which, beyond physical laws and general logic, can only come from a real tube. Check out directional speaker cables too. And when buying them, make sure to buy the triple 24K gold plated contact 1999$ ones.
Remembering the power supply requirements needed by tube circuitry, I was hoping to see what value B+ voltage was being supplied to those tubes and how it was being generated from that small circuit board.
Logan Le Roux I don't know about guitarists, but I used to modifying and upgrading components in stompbox and guitar amplifiers, on request from my friends, I have many friends are bassist and guitarist, but I never know how to feel and listen to. But, yeah, audiophiles are ridiculous about how can they "feel", like they can "feel" the sound of cable touches the floor, because cable should not touching the floor, wow, just wow...
Come now, there is as much BS in the guitar community as there is the audiophile world. From "tone wood" to nitrocellulose lacquer. There are idiots who believe that the amount of beer spilled on their guitar adds all that "tone".
You should have compared the input from the output on a spectrum analyser. Tubes add harmonic distortion in a different way then transistor do. So there is a difference.
To impart the harmonic distortions that are characteristic of tube amplifiers...in other words, to inject added "desirable" distortion into your output signal. Many prefer the warmth of the distortions added by traditional tube amplifiers to their music sources, and there is absolutely nothing wrong with that so long as they also realize that the warmth is, in fact, a distortion and not true to the original recording. We all have our personal preferences and many of us will fine tune the bass and treble response curves of our audio systems to our own personal tastes and choice of music.
You can actually can check the frequency response and distortion with just a laptop and audacity. It has FFT and a sweep generator function. Takes only a few minutes.
What would be a better tube and circuit design for that application? What would be the "genuine article" so to speak? If you wanted to run your audio signal through a valve, what would be the audiophile approach?
I'd really like to see you look inside a "high-end" valve headphone amp, just to see if there's much of a difference. Surely just writing off all valve headphone amps based on this one is a bit presumptuous? Its like buying a cheap Chinese micro hifi amp from Amazon and then just saying all hifi amps are rubbish.
+Dan Xepha No matter what you do, Tube amps are simply not any better than decent transistor based amps. Tubes are a thing form the past, obsolete, cause semiconductors are simply better in every aspect aside form looks.
+ABaumstumpf Depends on the application. Tubes do have their obvious disadvantages in power requirements, size, and failure rate, BUT they do have unique characteristics that are desirable in certain audio applications.
Kenneth Scharf IN places where you want distortions only - and even there for years we simply used digital equipment to get exactly the distortions and effects we want. But for a cheap clipping e guitar it is good.
+ABaumstumpf no matter what amp you use, ALL speakers reproduce the sound with extremely high distortions when you compare them with distortions made by amplifiers. So ooo. .. yeah. It is all very subjective.
In some jurisdictions this could be seen as a Trading Standards issue, since it isn't actually a valve AMPLIFIER at all. Even if they made the argument that a cathode follower is a current amplifier that doesn't hold here since the input resistor on the first op-amp is a much higher value than the volume pot resistance. The op-amps provide a gain of about 6 by my reckoning, and probably a bit of tone shaping which leads to the subjective, "Wow, that sounds better" user response. Though,a 5532 isn't designed to drive a low impedance load like headphones, and the use of a purpose-designed headphone driver would almost certainly give lower distortion results and more drive power. In fact, the design min load impedance of the 5532 is 600R according to the Ti datasheet, and the current limiters will operate at about 40mA typically (0.6v across 15R) so they really are stretching things here. Even with two in parallel that's going to hit a current overload situation at about 3v peak output with low impedance headphones and two 47R's. That would actually be more than adequate volume with most headphones, but it's a very bad way to design an amplifier, basically running the ICs way outside of design envelope. Exactly why they didn't use the valve as an amplifier, not sure, possibly because a higher supply voltage than 24v would be needed to achieve a linear response.
"Exactly why they didn't use the valve as an amplifier, not sure, . . . " Because that would take work and circuit complexity. There's no way they could meet their price point.
Drive the thing into distortion and see which distorts first the valve or the op amp. If it's the valve then it's working as advertised. If you *want* distortion in a headphone amp is matter of personal preference.
dave thanks for the excellent vid, please forgive my ignorance.. i'm trying to up my level of understanding in electronics. my understanding is that a valve produces a pulsed dc output when the grid is fed with an ac input signal (replicates the ac waveform but above the 0v line). i understand that having a transformer after the plate effectively resets the outputted pulsed dc wave form to straddle the 0v line again, recreating ac. as you've shown in your breakdown, the coupling cap is fed from the cathode. i'm stuck with visualizing how the coupling capacitor or a transformer (which is biased negatively at rest in this case) can transfer the wave form, totally accurately.. surely if the first signal pulse swing is in the negative direction for instance, the cap will ignore it as it's already fully biased in that direction? i always try to imagine a capacitor as a double ended hydraulic ram. so would i be correct in thinking the piston of said ram always be bouncing off the negative bias end of the cylinder as when the signal stops the cap will charge fully negatively from the cathode feed? if this is correct then is there a form of distortion added when a higher amplitude wave form is transferred through with regard to a smaller amplitude wave? like a 0 point drift? my thinking hydraulically.. a large oscillating swing on a ram, biased to one end, will have a different cycle centre point within the cylinder than a short oscillation. correct me if i'm wrong please dave... or anyother of you wonderful system heads. cheers, peace xx
A tip of the hat to head off the constant complaints by some that he only uses test gear out of reach for many viewers. Anyone who really wants an oscilloscope can afford a Rigol scope if they save their money and make that a priority, not so much the case for a 1GHz Agilent/Keysight scope.
Hey Dave, if you don't use the amp, which I guess you won't, could you smack one of the valves and take it apart under the Mantis? Would be inderesting to see, as probably no-one born after 1970 will have seen a valve from the inside.
Great analysis, but I'm not sure the average Joe will get the main fact that: in the "emitter follower" configuration (gain~1) and the low level signals, this circuit will never have the close to saturation smooth clipping, responsible for these so loved harmonics that audiophiles came to love so much. A simple harmonic distortion comparison might have been easier to understand...
Awesome video..Would love to see a reverse engineering of the peavey 6505mh (mini head). A lot of talk on whether the tubes are functioning as most tube amps do..
From the Peavey product page: *2x EL84 power tubes and 3x12AX7/ECC83 preamp tubes* Those are pretty standard types/quantities of tubes for a guitar head. Sounds like a normal tube amp design to me. EDIT: Electronics repair tech here... I've got a Marshall solid state head sitting down at the shop right now, really should get around to looking at that... :)
The quick way to test if the valve did anything would have been to yank the valve out and see (hear) if anything came through. In this case nothing but linking pins 2 and 3 (grid and cathode) would have restored the audio with probably very little difference in audio quality.
excellent vid. Actually, i'd actually build an amplifier with only tubes for my desktop, a stereo / surround kind, since i got a lot of good tubes from an old, rusty Philips scope. but the PCB design with LEDS for fanciness is not bad, I might keep the idea, but with amber leds. that would make something beautiful. no brand, just a few knobs, volume/tone/input
"choob"? Hadn't seen that before. Funny. Fun experiment: replace each "choob" with a jumper wire from in to out. See if the thing still works. Looks like it would.
I like valves for there retro appeal and historical value, unsurprisingly it is more just eye candy. I would have to remove the blue LED's, kind of look out of place on a valve.
+TheEPROM9 The blue LED craze started in the late 1990s, almost every single bling bling black plastic crap electronic gadget were full of blue LEDs. Remember the color LED computer fans? yea... they had their day.
I'm quite surprised... I saw this in the previous mailbag and thought the valves were just fake and made to glow and not part of the circuit.... but they do actually do something. In the CF configuration do they introduce a distortion that can be perceived? Does it sound like something that could be construed as "Tube Sound"? It would be interesting to follow this up with some time domain analysis, what sort of distortion etc?
So basically this is a tube unity gain buffer followed by parallel op-amp unity gain buffers. I think I'll keep plugging my headphones directly into my phone and save $50.
+mipmipmipmipmip More like lose $500 because you're listening to your music with vastly subpar headphones. That said, such a headphone requires actual gain, not a buffer.
+FlyingShotsman Most phone outputs are single miniature low power opamps - new ones, barring GSM noise pickup, are much better than this misused NE5532.
The dual op amp is being used as an amp with a buffer following it, for increased output current and stability. That's where the amplification is coming from. Since they are socketed you could easily replace both op amps with something like an OP2134 or OP275 for better performance, especially with 600 ohm headphones. But the crappy tube is likely to be the limiting factor in the noise floor.
I was surprised to output at the cathode was that clean and linear (minus the switch mode noise.) The tubes were operating in starvation mode. I was expecting some soft clipping on the negative swing of the sine wave.
Guys and hopefully girls, the tube is there to glow and add the warm-up effect when you start the amp. The blue led fucks up the glow part of it's purpose so you only end up with the warm-up effect. And worse characteristics amplifier.
The crazy thing is that after half a century of valves which cannot possibly be described in terms of 'conventional current' we have a return to wrong-way-round diagrams with transistors.
I might have this wrong, but i think it's not about distortion, it's about "tube sound." They add warmth to the audio signal. It's an audiophile term. So, does this amp do that? Only a professional audio enthusiast would be able to tell. Dave, you don't strike me as one. :)
You do realize that the "warmth" you speak of is the product of an innate alteration applied to the original source audio by the tube, mostly harmonics and non-linearities -- the very definition of "distortion". So it is, in fact, all about distortion. That said, there is nothing wrong with preferring a certain sound to one's music, just so long as one realizes that any alteration of the input source is, in fact, a distortion of that source. The problem is when egos, and sellers looking to exploit those with far more money than sense, can not acknowledge that the "warmth" is what it is, distortion -- desirable, or not, it is what it is.
Ethan Poole Any alteration is distortion, but distortion has a strong negative connotation. When someone says distortion, I immediately think "clipping." But that's not what you're saying, and that's not what I'm saying either.
LOL the Xuanzu Headphone amp! It used to be an ebay bestseller for sometime, though the design was really crappy. And the tubes are made by SGEL, not by syvania, which is more expensive.
Hi Dave. The reason they are using that simplified 6688 tube, is due to cathode area or (size.) Larger cathode area in a small vacuum tube means they will operate at lower Voltages ( providing they don't have to produce much drive power) They would have been better off to use a "space charge" tube and arrangement. A space charge tube is designed to work with 12 Volts on the plate.
Enjoy your holidays!
+Mr Carlson's Lab Whats a "space charge" tube??
+Jack neff
Hi Jack. Space charge tubes were used in equipment when no high voltage was present (IE: late 50's car radios.) They use the space charge grid principal to accelerate electrons at low plate potential. They differ a little in operation from a normal tube... EG: The control grid is is positively charged to act as an accelerator grid. The screen grid is where you feed your signal to be amplified. The suppressor grid (if any) in some applications is also positively charged. The tube 12K5 comes to mind.
+Mr Carlson's Lab China needs to start making space charge tubes again if they are going to make things like this instead of sticking random tubes in a random circuit.
I agree!
Unless...no...they wouldn't...of course they would, it's China, the home of cheap and electrocuting electrical ;-;
*unboxes new amp wall wart, reads back*
Class I Power Adapter
Input: 100 - 240VAC 0.2A
Output: 200VDC 0.1A
You brought a tear to my eye, I didn't know anyone still uses vacuum tubes.
Back in 1959, when bits were flat, I went to a very good Engineering school we were taught vacuum tube circuit design. . Seeing the plate characteristic graph brought it all back.
Immediately after graduation I went directly into computer programming.
Not trying to start a war, but I think putting LEDs under tubes ruins the look of them. The dim glow of a tube looks great on it's own, so I see no reason to overpower it with gimmicky, incredibly cheap looking lighting. On that topic, I personally think LEDs under nixie tubes should be considered a crime.
+jjensen2492 and cycle through RGB heh
+transistortester Ikr? Plus being the color blue, makes it look like a dyeing tube lol!
I agree, nothing like the soft glow of those tubes. blue...what the hell is blue doing in a tube? i grew up around that stuff. my dad was always fiddling around with that stuff. he was pretty good at it. i wish I had his collection of radio tubes and amps.
+Travis Piper Yeah, last time I saw tubes glowing blue it was a set of four EL34s experiencing The Who at extreme volume. The audience were happy but the tubes weren't.
+transistortester fully agree, seeing a blue led under any kind of tube makes me very sad. It's not anger anymore, just disappointment in humanity.
What I want my audio to be is what is stored on the file on my computer. No coloration, no distortions, no filtering. I want to listen to sound the way it's intended to be heard, and what's on the file is what I want to hear.
Note how I said *MY* sound, and not *everyone's* sound. Some people (actually, probably a lot) enjoy the coloration of a tube amp, or a specific EQ setting, or some tasteful deviations from what the sound file actually contains. That's fine, it's what they enjoy. For me personally, I would want an amp (really, a DAC-amp combo) because the headphones I have can't be properly driven by what I already have.
Although I think we can all agree that _"audiophile"_ grade SD cards and Ethernet cables do absolutely nothing. I really wish that the term audiophile didn't have such a negative connotation to it. When I (and maybe other people) see 'audiophile' on something, it immediately triggers our snake oil detectors.
Just thoughts :)
That is one thing I dislike about Windows and many of the drivers as there are so many forms of electronic distortion that can easily be added by the software drivers, if I wanted my audio to sound like it was music out of a well I would buy the cheapest speakers.
But even all solid state amps sound different from one another, so in effect they are all adding coloration to the 'original' sound.
These things remind me of that one friend I had that re-ripped his entire MP3 collection into FLAC (from the MP3 files, not original source), telling me it was for 'better sound quality'. Biggest thing though, as with 'oxygen free' cables - don't engage with them in argument or present logic. *backs away slowly*
+MattExzy Well, using FLAC is not that stupid. You typically won't hear the difference, but when MP3 is used with a high compression rate, definitely will. You normaly don't run into space problems on your hard drive nowadays, so I see no point in not using loss less compression formats like FLAC. No need to say that oxygen free cables are ridiculous.
+MattExzy Sunk costs need some kind of justification. I cannot believe he actually insisted it sounded better though. Belief is a hell of a drug.
I had a long conversation once with some folks who SWORE that there's a difference in audio quality between FLAC, Apple Lossless, and Wave.
I even encoded a source file into each, then back into raw PCM samples, and ran a binary compare on the result. The (totally unsurprising) result: 0 differences encountered.
"Well, *I* heard a difference." sigh.... You can't save everyone.
+as df You missed the point...
This guy converted MP3 to FLAC...
*****
Yeah I know - that's my point.
I'm a musician and an electronics engineer. Tubes are not better for purely listening to music. I want to hear the music as close to the original as possible. Give me a low noise solid state amplifier for that. No filtering or "coloring".
However, for guitars and basses, the tube sound is real! Tubes sound fantastic for their dynamic range compression and harmonics they add. Not ideal for playing recorded music at all!
I disagree tubes are best all the way around. I remember even an AM radio with tubes the sound sounded like stereo. Not the all American 5 tube radios I mean Atwater Kent and Zenith radios. they mainly used 6V6 or 6F6 amplifier tubes, even the rectifier made the sound better. The youth of the 80's and beyond havent heard the real Hi Fi sound only tubes can produce. I had an Admiral Record Player that used 2 6aq5's and one 12ax7 and a 5y3 rectifier and the sound was outstanding especailly when I used a 10inch woofer from an old B and W TV set. Tubes rule in good HI FI audio.
@@ronb6182 No Ron B, it's because the music was better then. ;-)
@@j.w.8663 the music is the same same songs we are talking about fidelity. I have and played the same records on both type of amplifiers and tubes win every time. Even the rock song seasons in the sun sounds better on a dynaco amplifier than on modern stereo equipment. My friend listens to rock music I don't as a general rule. I may have a handful of popular tunes I like but my main is classical music. Big band music was what I grew up listen to when I was young, I had a few years listening to 50's rock when I stayed at my birth mothers house but when I was really young like 3 years old my adopted parents listened to big band music. The classical music came into my life when I was 7 years old when I started piano lessons.
I agree the over the air music was better then because you had a choice what type of music to listen to. The old Atwater Kent radio could pick up stations all over the country on AM. The tv antenna was also used for my radio I just used one side of the 300 ohm twin lead line. I don't remember grounding the radio. AM today has nothing to offer. You can get choices on the internet like you could over the air in the 70's.
I haven't tried cds on my tube amplifiers yet because I need to recap my equipment, I just aquired a varac that my work gave me for helping unload a storage hanger at the local airport. He said he used the varac when he repaired tvs and radios.i will try it on some of my tube amps. I would never run on 125 volts the tubes need 110 volts for that was the voltage back then.
I believe the best of both worlds will sound good. I will post later when I hook my cd player to the tube amps I will also try my computer sound on the tube amplifiers as well. They sell headphone tube amps on amazon and ebay, but I don't have that kind of money to spend.
Tubes/Valves adds presence to recordings, mainly because of even harmonics and soft clipping! Guitarists like overtones like the octave 5th’s , minor 7th’s etc - physco acoustics, Fourier analysis, Taylor series, mathematics way beyond my uni days!
I actually own one, and even using only two tubes, this fine little amp has the delightful, noticeable *soundstage* of a tube amp. I find that quality of sound unmistakable without dismantling it technically. The tubes also make it easier to notice where the musicians are located in space. So, it's a hybrid amp with a genuine tube ambience... Regardless of whatever its distortion may be rated at - and that's probably going to vary according to the tubes being used - I have personally noticed much less listener's fatigue... I have enjoyed this amp hours on end playing music that I usually avoid because it's not a warm or full, especially at the bottom bass end of the musical spectrum. The tubes add warmth and fullness and spaciousness of sound. But my initial impression is that I was amazing at the improvement of the soundstage that even my Grado GS1000 headphones could not produce. As a musician, this is the most fun I've had improving the sound quality and my entire library. So, I'm disappointed that the technician in this video apparently didn't actually describe the amp's sound before technically analysis it. The only analysis that truly interests me are by those who have the ability to hear the different qualities in the equipment they are analyzing, and I found that lacking here... This means saying right off the bat whether this or any other amp sounds pleasing to the EARS... or why bother going to the trouble of analysis it? In the meantime, I've ordered some NOS GE 6688 tubes that should make this little amp sound even better. It's the EARS that take over after the analysis ends. So of course the tubes are having their effect.
i have one also and totally agree! its noticeable to soundstage. this review just talk about electric thing but amplifier is about sound.
Subjectivist audiophiles just LOVE not talking about noise, distortion, etc. (IOW, objectively determining how good something is). It's all about using purely subjective terms like "soundstage", one of the favored buzzwords.
23:40 "so the tubes actually do something..."
Yes. They add 1.6% distortion.
+NatureAndTech But at least, it doesn't have an output transformer...
+AltMarc adding a transformer will significantly reduce any static noise.
+NatureAndTech I find the best bit being the tube in the "Tube Amp" is actually removing amplification.
+NatureAndTech They heat up the room too.
+Ivan Taranov "Where's the Beef?", That's a few years back.
I wish Dave had spent 5 seconds longer and switched the input to a square wave.
+dogastus Now that would have been very revealing and a good indication of performance with a 24v potential.
+dogastus what would be the difference?
+Son of a Zombie It would give an indication of frequency response. Rounded slanted edges would indicate an HF roll off, sloping top and bottom would indicate LF roll off. Any ringing on the edges would indicate poor phase response and/or marginal stability.
+dogastus I wish he would have done a frequency sweep!
cbbuntz: "+dogastus That dual opamp thing looks like a stability nightmare."
No. That is not an uncommon circuit configuration.
Since the tube output is nearly the same level as the input, I would love to see what happens if you pull the tube and simply short from pin-to-pin - letting the op amps do all the work. If I'm reading the schematics right that should give a fairly good quality result.
Probably too late since the video is from a year ago.
"They're filled with vacuums." :D 8:39
Harlequin314159 They put a lot into it 😂
Hilarious.
I have to say you are really good at explaining circuits. I was expecting to be totally lost with my high school knowledge of circuits, but I followed the gist of most of what you had to say.
Keep it up Dave, you're informative and fun to listen to. I'm old enough to remember when a TV or radio went on the fritz, pulling out all the tubes and riding to the drug store on my bike to run them all through the tester, then hoping that they had a replacement in the cabinet underneath. Also, TV repairmen who made house calls and always had a red and black RCA tube caddy. The good old days!
What would be SUPER AWESOME is for Dave to point us in the right direction with a link or 2 of some choices of TRUE tube pre amps that are headphone sized and or a little more powerful... Thank you for the great detail Dave top quality as usual, hope the masses can help you find some proper choices for us, Cheers !
Dave, I loved this bit. I've always been fascinated with vintage technology. I'd love to see more pre-transistor teardowns and explanations of how they work.
Biggest improvement is remove the 2 tubes and install 2 links from grid to cathode, and remove the cathode resistors. You save 2W of power and improve reliability by at least an order of magnitude and reduce the noise.......
Of course if you want the valve sound leave the resistors in and use a 1N4001 for the link so it is forward biased and able to generate the lovely distortion with less power and noise.
So it's not a skookum choocher then Dave, is that what you're telling us?
+neil huband Nope, she is many things, but a skookum choocher she ain't.
digitalradiohacker right into the art bin
+JinzoDefiler yeah, I'm an engineer myself (CNC programmer/operator), so I find some of his videos interesting. I do wish he'd do a couple more in depth power tool teardown reviews, not seen one for a while.. +AvE if you're listening? ;-)
+neil huband NEED MOAR BOLTR!
+Bindo yeah, +AvE !
we need moar of teh BOLTR!
He's not done an in depth tool review for ages now. That was the main reason that I subbed to his channel. I miss them. :-/
How can people possibly know this much about this 26 minutes long video 5 minutes after it being uploaded?
they don't? people read the title or skipped ahead
valves do have a different sound by them selves if used in a old school full valve job running at the full 160v with the beefed up components but as a hybrid its a wanking matirial just to say u got valves. I reckon valve should stick with valves and silicon should stick with silicon.
+John Ridley Agreed. I was hoping he'd just go ahead and jump grid to cathode across the missing tube socket and fire it up with a tube channel and the 5532 channel and compare the two. Take a bit of messing to set up to test it, but might be fun to see the results. And the reactions...
If someone had gifted me one of those things, that's the treatment it would get. Make a decent headphone amp, the simplified way. (And chop out those LEDs!)
Stu
"How can people possibly know this much about this 26 minutes long video 5 minutes after it being uploaded?"
Because some of us are old farts who grew up using tubes.
I know it's not necessarily your area of interest, but I really enjoy your audio equipment teardowns. I would love to see more!
Aw, I wish you used a square wave on the scope, it would have revealed a lot more
Without getting into plate voltages and all, I have to say that tubes sound different than transistors. In my college electronics class years ago, our instructor said something to the effect that a good quality transistor amp will treat the odd and even harmonics evenly. However the human ear doesn't find odd and even harmonics to be equally pleasant. He said that a tube amp tends to "cheat in your favor" as far as doubling up on the harmonics that the ear tends to like and attenuating harmonics that are less naturally pleasing. I am so old school that I actually like the sound of a phonograph coming down on a vinyl record!
William Beckham, I wonder if your old teacher was correct......as I understand the human ear, it is just a series of tiny hair cells that respond to excitation by different sound frequencies. If that is true, would they be able to distinguish between the different harmonics? One note's 5th harmonic can be the same as another note's 8th harmonic, and how is the ear supposed to react differently (and one is an odd harmonic while the other is an even harmonic). Seems to me that a lot of audio snubbery is really just folks misunderstanding, or improperly applying, physical truths.
+EEVblog, Dave, a video on audio distortion theory (for beginners) and measurement might be pretty popular.
Fun fact:
The European ECH83 mixer/oscillator tube will work with a plate (or anode) voltage as low as 6 Volts. It was mainly used for car radios.
+Runar Damnes yea, but this EF80 alikes aren´t made to operate at low plate voltages
+TubiCal
EF183 will work down to 20V or so. Not sure about the EF80.
You waked in me the electronic's fever again! I was an electronics tech in my early age and was dedicated to repairs
very interesting! I love this kind of reverse engineering, op amps, tube etc...thanks for the explanations
Thanks Dave! Learned some stuff about tubes, which I'm too young to have formally learned anything about! 👍
Valves are like the guilty pleasure of electronics... They're old tech and don't have the performance of a modern transistor. But they look so cool...
What pisses me off about this subject is that it is really subjective.
I used to be a recording engineer, not a sound engineer or a mix engineer. My job was to capture the performance or sound source as close to original as possible.
For this job you needed an objective ear, one that can pick out small imperceptible things that many other people would miss.
A simple thing like positioning a microphone 20 cm to the left would change what was being captured and recorded.
We would use expensive everything to monitor the recording. Everything from the mics and their cabling, the mixing desk, the headphone pre-amps and the headphones, no expense spared.
The most expensive part of this chain were our ears. Myself and the guys I worked with could hear an aircraft or local traffic in a noisy concert hall, or on location we could hear insects that were going to tape but the rest of the crew could not hear until we pointed it out.
Anyway, to my point...
With modern equipment, and we can even include smartphones here. You are able to EQ or tune your sound to how you want it. 90% or greater of users don't know how to do this in any way close to correct. I have even worked with professional engineers that disputed the clear evidence from the expensive digital readouts and ended up screwing up the recording.
When it comes to sound, every person seems to be a professional.
And fuck valves. Whatever they did for audio can be simulated and tweaked beyond your imagination in software. Even down to adjusting the element temperature and the surface area of the grid and so on.
Rant over.
Nice vid Dave.
A true audiophile understand the importance of a good signal chain; which is even more important than which tubes you use (as for as those- I only accept a few specific models that were produced by Phillips in the late 60s (which I was fortunate enough to procure a stockpile of at auction after much searching), but I won't get into that). Everything that exists within the signal chain will modify the sound. I use exclusively analog hardware due to its superior accuracy, though I do make one exception: my record player happens to be a few meters from the rest of my equipment (which is in a specially designed cabinet to shield it from the earth's magnetic field), and to get the signal over there, the signal from my preamp enters an ADC then sends s/pdif using a custom white laser (merged and color-balanced RGB) through a rigid glass fiber and then received by a dedicated DAC and then tube preamp. This signal then either feeds into my tube power amplifiers that feed the main speakers (through solid brass, oxygen-free, shielded speaker wiring, terminated with gold-plated connectors (I find that the brass with gold plating doesn't give that "dulled vocal depth" in the mid-high range that you get with stranded copper), it is also fed into a second ADC, similar to the first one, which is used to carry the signal to a similar set of equipment for the rear of the listening room.
+mikeissweet Good troll, but it has to be slightly more subtle.
+Spirit Lmao ding ding! Damn those audiophools.
+mikeissweet You almost had me until the magnetic field stuff. That is just a wee bit too far for even the nuttiest audiophiles I've happened across.
ugh, theres so much 'audiofool' bullshit 😉
Awesome... until the Earth's magnetic field, then it goes off the tracks. White laser? All fiber is "rigid", glass is glass. You redeemed yourself with the gold-plated brass however.
Best part is watching Dave's arms swing around in the reflection on top of the tubes.
Hows does that man have so much energy?
Thanks Daveo! Enjoy your hols..... you've earned them!
I was born in the valve era, and my first ham HF transmitter was a Hallicrafter, which kept the room warm in winter... but transmit frequency drifted all over the place. It was very good for an isometric work out when cleaning out the shack, though!
I'm glad we've gone solid state, I got fed up of 180v DC shocks working on this kind of tech.
@eevblog Dave, one reason for tying one of the grids to the ht was to use it as a space tube, the low voltage ht, often just 12v. This was very popular in car radios before the proper dedicated low ht voltage tubes were developed for the car industry in the 50-60's this was short lived with the advent of more reliable transistors.
By the way I didn’t buy my one as a headphone amp, I use mine as a signal tracer, it’s a cheap way to make one with a good uncoupled input.. You also get a spare tube (or Valve if you are British) to play with, solder some wires onto the pins and you can experiment with it in triode and pentode configuration. You need about 90v to make it work properly, so rubber gloves are a good idea.
Just to be clear, there are two types of JFETs, enhancement mode and depletion mode; tubes/valves operate like the depletion mode variety.
I remember I saw a schematic of a all-tube automotive radio receiver in which ECC86 double-triode tubes were used. They were designed to operate at low anode voltages like 12 Volts at the cost of higher distortion. In comparison to other car radios with vibrating voltage converters these tended to sound "dirtier", mainly because of that relatively low voltage. If you get your hands on one of those radios - that would be great. Worth of mentioning: in many guitar amps with tubes on input they use tubes like ECC81, ECC83, and so on (triodes) that are interchangeable, meaning you can swap one type for the another in most cases.
Hi Dave,wow cool to see you´re doin TubeStuff :) :)
I love you´re sayin´ JFets with pilot lights....Great clarification for unexpirienced people! :)
But in this case, the tubes running on "starved plate" configuaration in where the plate voltage is to low for a typical bias point, you´re finding in datasheets....
Therefore to let the tube at least do something you need to wire it up like how it´s done here...
But as a cathode follower the tube will not add a "tube-sound". A cathode follower can´t do this, there´s no saturation. Instead it´ll go straight into clipping, just like any Jfet or BJT will do....
+mipmipmipmipmip Tubes, even crappy tubes, are more than capable of producing excellent quality audio. Even this one with a 1.6% specced distortion can most likely be coaxed into being plenty clean with a high enough voltage (which provides headroom) and relatively careful choice of biasing and impedance.
The thing is though, transistors do all that stuff way better and easier and smaller and cheaper and less dangerously .. one of the only real uses I see for tubes these days is in guitar amplifiers, where the whole point is to slam the shit out of the tubes with insane gains and voltages, and really ride them past the edge of their standard characteristics. With all their analog goodness, the real fun comes when you mistreat them. The boring, linear region is not exciting and is better represented by transistors.
+TubiCal As MrCarlson said they would have been better off using space charge tubes. China needs to stop making random tubes and sticking them in stuff but building tubes designed to work on low voltage. Or they could simply use a tiny boost converter to generate the high voltage instead.
TubiCal The 1.6% figure is for a common-cathode topology with no NFB. Not a practical circuit.
If the signal level is low, there is no clipping due to bias.
Thanks a lot! Really appreciate audio teardowns/explanations!
The equivalent tube to the E180F, which is special quality industrial tube is the 5A/170K, the 6688, or the CV3998. The 6J9P is originally a Russian standard-grade tube, 6J9P-E is the strengthened version, but it could be 10,000 hours type, instead of the 100,000 hours special quality tubes.
double blind testing done by the BBC showed that INCREASING distortion improved perceived sound quality .
....purity of audio reproduction. There is no such thing. Purists look down on things like tone controls in amps, yet overlook the many multiband eq's used in the recording process. And the many meters of non audiofile cables used in the studio :-) Will an audiofile 2m cable make any difference after the 20M of ordinary cable its gone through when recorded..
Perhaps Dave could test "audio' 240v amp fuses that cost $100's . People swear they make a big difference in sound. Just kidding, please dont.
When you're *producing* sound, you can use any method you want to achieve the sound you want, so using vacuum tube amps for recording purpose is fine. When you're *reproducing* sound, you should use whatever method produces the mathematically most-accurate amplification of the source signal, so you can be sure you're hearing exactly what the artist intended. That's why my home stereo uses a set of self-correcting JBL studio monitors with built-in digital amplifiers, rather than some ridiculous glow-in-the-dark vacuum tube setup, so I can hear my vacuum-tube-amplified rock albums with perfect clarity.
Supposedly 2nd order distortion 'harmonises' whilst 3rd order would be inharmonious, but I tried adding 2nd order using a plugin and it sounded dreadful.
the same with Tripath and some other amps, they ad distortion, but "good" distortion not the kind of distortion crappy Class B silicon amps ... there are of course good transistor amps, Class A, Class AB, even some good Class B amps ...
@@deusexaethera how do you know that the sound on the record is what the artist intended?
@@dcan911: Because they get to hear the master after the recording engineer is done with it, and request changes to the final mix. Or at least, _good_ musicians do that. I suppose Justin Bieber probably doesn't care.
Thanks for making this video Dave. Saw the title, and thought "this'll be interesting" and it is.
If you are feeding in line level 100/500mV all you need to drive a low impedance headphone will be a current amplifier. Very little gain is required. If a valve only is used it will need a transformer to converts it's high impedance to the low impedance headphones. Which will lead to phase shift, more distortion and poor bandwidth ie a valve amplifier.
+Michael Beeny I fully agree on that. I built a simple transistor amp with small voltage gain, but decent current gain. Even at same volumes on the output, sound with the amp in the circuit becomes a lil' bit better (better bass)
+Michael Beeny Good transformers won't cut much subbass or introduce any appreciable amount of phase distortion in audio band either. Some people actually even build transformer coupled amplifiers specifically because they're easyto make. The downside is mostly weight and output impedance - in audio applications.
+Michael Beeny LOL totally not true unless you use a garbage transformer. There should be very little distortion in a good transformer.
It’s all to do with even harmonics and soft clipping that valves/tubes bring into the sound! Guitarists love it as it brings out overtones from the vibrating strings- octave, 5th’s , minor 7th’s etc . long sustain notes using feedback near the speakers! Listen to Brian May on Queen recordings, he uses many of these natural effects! A valve pre amp with a solid state power amp gives pleasing effects also and the music gives a feeling of presence especially in the bass and mid range! I used to own 2 Leak TL50 power amps with point one pre amp! Wow what a sound-like the musicians were in my living room live! I sold it off stupidly as new KT88 valves were getting too expensive! I think you are about £150 now for a matched pair! A small valve pre amp into a Fet power amp seems like a cost effective solution to get a decent response from medium sized domestic speakers!
A headphone amp doesn't need much voltage gain, and you *can* do it with just a 5532. But better is to have some extra current output for low Z cans. Running a triode/pentode at low voltage is fairly common in products where they just want the "valve sound" - the low volts if helps the typical distortion sound. You could have just pulled the tubes to see if it still passes signal, and saved a bit of time. ;-)
"Filled with a vacuum" - Best Dave quote so far ;)
I did not expected a cathode follower design for the "true tube sound"/"distortion".
Also as @Dave and datasheet said, you will need at last 160V B+ for that :)
One more thing I'd like to see - a THD measurement, 20 - 20kHz.
you should contact techmoan he wanted a video like this one
Yeah his actual tear down was more or less just opening up 3 of these kind of tube/valve headphone amps and showing the boards. But then again he said he's not an electronics expert, which is ok.
I learn a lot from these type of videos. Thanks.
19:52 I'm no expert in tubes, but I can see right away that if this tube were biased as the datasheet says to do it, the tube power would be 160V * 16.5mA = 2.6 watts. Times two because this is stereo, and you're talking about a lot of power. Now try to generate that power from a little tiny boost converter powered off of 6V. You need a hefty >200V filter cap for the boost (read: $$$), too. It's much harder to fully bias this tube for this thing than it might appear, which is why they adopted a very simple ±12V rail system. Otherwise, the power supply would have been more expensive than all the other circuitry combined.
So it's okay to bias a tube filament with a DC voltage?
The quick way to test if the valve did anything would have been to yank the valve out and see (hear) if anything came through. In this case nothing but linking pins 2 and 3 (grid and cathode) would have restored the audio with probably very little difference in audio quality.
When you first showed the video of the inside I wondered where the HT rail was because only 16V surface mount electrolytics were visible then I noticed the radial electrolytic and thought that must be across the HT rail. It turns out that the HT is only effectively 24V (± 12V) so the 16V capacitors are adequate.
Man this video rules. Thanks for another ripper video.
i would love to see you do the same thing for something like a Fiio E10K now, great video Dave you answered the questions i had about tube headphone amps
***** since i started seeing those headphone amps with tubes lately ive wondered if they really use the tube or if its just bs and now i know its basically just bs lol
The whole point of a tube amp is to get distortion. Of course conventional solid state or discrete amps will perform better. Honestly, this product doesn't appear to be a rip off at all. I am not into tube amps, but for those looking for the tube amp distortion on their signal path this is probably a cheap way to get there.
It needs rare earth metal coating on the valve sockets to be any good, How did they miss that? Top Vid, never knew valves would work at such low voltages.
+Mike James
24 Volts, or even lower, is not unusual. It's basically a myth that ALL tubes/valves needs hundreds of volts to work. Many will and a few won't. How well is another discussion.
+Mike James Don't forget the cryogenic treatment to make it "Audio Grade". Oh, and a really expensive power cord. ;-)
+digitalradiohacker You beat me to it, I was going to mention the importance of oxygen free power cords because that 60Hz hum is so much more enjoyable with an oxygen free power cord inserted between the receptacle and transformer!
And I love the whole notion of "audio grade" digital interconnect cables (HDMI, Ethernet, etc.) and flash memory devices. Some of the claims made by audiophools are so outlandish they really should be criminal. That said, those that want the "warmth" of tube amplified sound are welcome to it as far as I am concerned (there is absolutely nothing wrong with preferring a certain sound -- we all have our likes) so long as they do not simultaneously tout the tube amplifier as being distortion free as the very warmth they desire is the product of distortion.
You know the funny thing about an "oxygen free" power cord? The owners never worry about the wiring in the walls of their house. Or the the power cabling to the house. Or the the nonlinearity of the power transformer on the pole. Or the . . .
Yeah, there are no rare-earth metals with better electrical conductivity than gold-plated silver. (the gold plating is only to prevent corrosion; gold actually has lower electrical conductivity than silver.)
funny times we have you explain what tubes are using jfet analogy. i'm quite young, but still 25 years ago in early ground school I remember reading my father's electrical engineering school books and I was learning about lamps. i always knew more or less how BJTs work. but only last week I learned about JFETs :D
My rant isn't so much about the gimmicky use of the tubes (valves), but the overuse of blue LEDs. Why are blue LEDs used everywhere !?
I'm old enough to remember when blue LEDs did not exist. You had red, yellow, and that ugly lime green, but no blue. Cree made some SiC blue LEDs in the mid 80's, but they didn't go far. It wasn't until superbright blues, made of GaN came out ~1994, then blue was everywhere !
But that was 22 years ago, so why still the frick'n overuse of BLUE !? Reds a nice color. Amber/yellow even looks classier. With GaN, they now have really nice green, too. And orange is one of my favorites. When on, it looks like candy. You almost want to bite the LED. Though orange, may not be a good choice under a orange glowing filament. But screw the blue ! Its also harsh on the eyes.
Michael Moorrees
The blue glow produces a "visible illusion" of power.
If one were to see a high-power broadcast transmitter using vacuum tubes (e.g. the transmitter of any 50kW broadcast station before about 1980), a blue glow would be visible, along with the brighter orange glow of the filament, simply because so many electrons were flowing so fast with traces of other gases in the tube.
Ironically, a blue glow in a receiving tube indicates that the tube is weak - that too much gas has accumulated in the tube.
honestly?... they have to do me a favour:: OR!! they start using white leds as indicators in devices with more that one indicator, OR!! i'll be happy with blue as well.... i don't see any major difference between the colors they use, i mean
-greenred
-redgreen
-yellowgreenred
-thatususalcolorusedtodrivedaltonicscrazy :D
screw lan cards and arduinos!! i'm a proud daltonic!! :D
but i agree
Because in 1990 blues cost £5 each, so to old engineers they still have an aura of luxury...
I'm old enough to remember when LED's were very small dots only on watches and calculators, and when the LM741 originally came out and sold for more than $10 each. Also 4 function calculators were over $200 and had a green display.
Seen a few OHJ "tube" amplifiers where they just stuck in any random tube into the front window to show. Not even in circuit as one was cracked.
Thanks for the vid Dave. I was shopping on Ebay and bought a 6J1 preamp kit which I thought I'd play around with. Still waiting on it, but I reckon it's probably a similar design except they run it direct off 12VAC from what I can see (no dc boost) and 6J1 toobs. At least it was only $10. I don't know how much this puppy would set you back
In the audio industry people pay large swaths of money for tube-based amps (especially guitar amps!) because it seems using vacuum tube valves instead of transistors as amplifiers delivers a much "greater" and "smoother" sound, whatever that means... so far I've been unable to notice any difference, except in the price tags.
yeah well the price tag for that one is around 20 euros free shipping so.. with or without the tube it's more or less the same price
When you're *producing* sound, you can use any method you want to achieve the sound you want, so using vacuum tube amps for recording purpose is fine. When you're *reproducing* sound, you should use whatever method produces the mathematically most-accurate amplification of the source signal, so you can be sure you're hearing exactly what the artist intended. That's why my home stereo uses a set of self-correcting JBL studio monitors with built-in digital amplifiers, rather than some ridiculous glow-in-the-dark vacuum tube setup, so I can hear my vacuum-tube-amplified rock albums with perfect clarity.
I've been banging my head against a brushed steel amp fascia with some audiophiles on this issue - can't wait to share this onto them!! This rocks Dave!
The "warm" tube sound which, beyond physical laws and general logic, can only come from a real tube. Check out directional speaker cables too. And when buying them, make sure to buy the triple 24K gold plated contact 1999$ ones.
+drkastenbrot yea, but they are only worth to buy if they had been manufactored during moon transition!
"Audiophile" means "lover of sound", it doesn't mean "good at listening".
drkastenbrot
Despite you can actually hear the coloration tubes give...
Retro Tech Teardown
This is a cheap chinese snake oil unit and not comparable to authentic tube technology.
Remembering the power supply requirements needed by tube circuitry, I was hoping to see what value B+ voltage was being supplied to those tubes and how it was being generated from that small circuit board.
Tube... Valve... Tube... Valve... Tube...
The heat from tube cause flamewar everywhere, I love it...
+Faisal Kadal except with guitarists. we have to feel and listen, audiophiles are just retards.
Logan Le Roux I don't know about guitarists, but I used to modifying and upgrading components in stompbox and guitar amplifiers, on request from my friends, I have many friends are bassist and guitarist, but I never know how to feel and listen to.
But, yeah, audiophiles are ridiculous about how can they "feel", like they can "feel" the sound of cable touches the floor, because cable should not touching the floor, wow, just wow...
Come now, there is as much BS in the guitar community as there is the audiophile world. From "tone wood" to nitrocellulose lacquer. There are idiots who believe that the amount of beer spilled on their guitar adds all that "tone".
Great Video! I was surprised that the valves actually are functional :)
You should have compared the input from the output on a spectrum analyser. Tubes add harmonic distortion in a different way then transistor do. So there is a difference.
Second question - What is the point of the tube/valve if the gain is one? Isolation? Impedance matching to the source? Looks "cool"?
To impart the harmonic distortions that are characteristic of tube amplifiers...in other words, to inject added "desirable" distortion into your output signal.
Many prefer the warmth of the distortions added by traditional tube amplifiers to their music sources, and there is absolutely nothing wrong with that so long as they also realize that the warmth is, in fact, a distortion and not true to the original recording. We all have our personal preferences and many of us will fine tune the bass and treble response curves of our audio systems to our own personal tastes and choice of music.
You can actually can check the frequency response and distortion with just a laptop and audacity. It has FFT and a sweep generator function. Takes only a few minutes.
What would be a better tube and circuit design for that application? What would be the "genuine article" so to speak? If you wanted to run your audio signal through a valve, what would be the audiophile approach?
Great video Dave. I ve linked this in to my own video as ive not had a clue myself.
Hi Dave, you could use your Analog Discovery to look at the Bode plot, gain etc.
Excellent video as always Dave.
I'd really like to see you look inside a "high-end" valve headphone amp, just to see if there's much of a difference.
Surely just writing off all valve headphone amps based on this one is a bit presumptuous?
Its like buying a cheap Chinese micro hifi amp from Amazon and then just saying all hifi amps are rubbish.
+Dan Xepha No matter what you do, Tube amps are simply not any better than decent transistor based amps.
Tubes are a thing form the past, obsolete, cause semiconductors are simply better in every aspect aside form looks.
+ABaumstumpf Depends on the application. Tubes do have their obvious disadvantages in power requirements, size, and failure rate, BUT they do have unique characteristics that are desirable in certain audio applications.
Kenneth Scharf IN places where you want distortions only - and even there for years we simply used digital equipment to get exactly the distortions and effects we want.
But for a cheap clipping e guitar it is good.
+ABaumstumpf True, Guitarist's LOVE tube amps!
+ABaumstumpf no matter what amp you use, ALL speakers reproduce the sound with extremely high distortions when you compare them with distortions made by amplifiers. So ooo. .. yeah. It is all very subjective.
In some jurisdictions this could be seen as a Trading Standards issue, since it isn't actually a valve AMPLIFIER at all. Even if they made the argument that a cathode follower is a current amplifier that doesn't hold here since the input resistor on the first op-amp is a much higher value than the volume pot resistance.
The op-amps provide a gain of about 6 by my reckoning, and probably a bit of tone shaping which leads to the subjective, "Wow, that sounds better" user response. Though,a 5532 isn't designed to drive a low impedance load like headphones, and the use of a purpose-designed headphone driver would almost certainly give lower distortion results and more drive power.
In fact, the design min load impedance of the 5532 is 600R according to the Ti datasheet, and the current limiters will operate at about 40mA typically (0.6v across 15R) so they really are stretching things here. Even with two in parallel that's going to hit a current overload situation at about 3v peak output with low impedance headphones and two 47R's. That would actually be more than adequate volume with most headphones, but it's a very bad way to design an amplifier, basically running the ICs way outside of design envelope.
Exactly why they didn't use the valve as an amplifier, not sure, possibly because a higher supply voltage than 24v would be needed to achieve a linear response.
"Exactly why they didn't use the valve as an amplifier, not sure, . . . "
Because that would take work and circuit complexity. There's no way they could meet their price point.
Drive the thing into distortion and see which distorts first the valve or the op amp. If it's the valve then it's working as advertised. If you *want* distortion in a headphone amp is matter of personal preference.
dave thanks for the excellent vid, please forgive my ignorance.. i'm trying to up my level of understanding in electronics. my understanding is that a valve produces a pulsed dc output when the grid is fed with an ac input signal (replicates the ac waveform but above the 0v line). i understand that having a transformer after the plate effectively resets the outputted pulsed dc wave form to straddle the 0v line again, recreating ac. as you've shown in your breakdown, the coupling cap is fed from the cathode. i'm stuck with visualizing how the coupling capacitor or a transformer (which is biased negatively at rest in this case) can transfer the wave form, totally accurately.. surely if the first signal pulse swing is in the negative direction for instance, the cap will ignore it as it's already fully biased in that direction? i always try to imagine a capacitor as a double ended hydraulic ram. so would i be correct in thinking the piston of said ram always be bouncing off the negative bias end of the cylinder as when the signal stops the cap will charge fully negatively from the cathode feed? if this is correct then is there a form of distortion added when a higher amplitude wave form is transferred through with regard to a smaller amplitude wave? like a 0 point drift? my thinking hydraulically.. a large oscillating swing on a ram, biased to one end, will have a different cycle centre point within the cylinder than a short oscillation. correct me if i'm wrong please dave... or anyother of you wonderful system heads. cheers, peace xx
It would be an interesting video to visualize the valve output vs. standard amplifiers, to see that the "warm" is.
1% 2nd order harmonic distortion
Thanks for sharing! Really enjoy videos like this.
marvelous video! kudos for it and thank you for the time invested in these video
thumbs up!
Why is Dave using an entry level Rigol scope on most his analysis videos?
A tip of the hat to head off the constant complaints by some that he only uses test gear out of reach for many viewers. Anyone who really wants an oscilloscope can afford a Rigol scope if they save their money and make that a priority, not so much the case for a 1GHz Agilent/Keysight scope.
There is no such thing as an "entry level oscilloscope". If you own one you're already at least semi-pro.
@@ethanpoole3443 Doing any of this is already out of the reach of many viewers no? seems like a weird complaint to me.
Hey Dave, if you don't use the amp, which I guess you won't, could you smack one of the valves and take it apart under the Mantis? Would be inderesting to see, as probably no-one born after 1970 will have seen a valve from the inside.
Great analysis, but I'm not sure the average Joe will get the main fact that: in the "emitter follower" configuration (gain~1) and the low level signals, this circuit will never have the close to saturation smooth clipping, responsible for these so loved harmonics that audiophiles came to love so much. A simple harmonic distortion comparison might have been easier to understand...
Cathode follower refers to the out put it gives low impedance drive to the next stage , and gives a Av of less than one Harry .
Awesome video..Would love to see a reverse engineering of the peavey 6505mh (mini head). A lot of talk on whether the tubes are functioning as most tube amps do..
From the Peavey product page: *2x EL84 power tubes and 3x12AX7/ECC83 preamp tubes*
Those are pretty standard types/quantities of tubes for a guitar head. Sounds like a normal tube amp design to me.
EDIT: Electronics repair tech here... I've got a Marshall solid state head sitting down at the shop right now, really should get around to looking at that... :)
This video was a lot of fun to watch. I'd love to see Dave tear apart some more crap audio stuff like this and the white van speakers.
Great video! I don't know what is penthode or triod till now.
Triodes sound sweeter than pentodes - its a complex subject, best just listen!
The quick way to test if the valve did anything would have been to yank the valve out and see (hear) if anything came through. In this case nothing but linking pins 2 and 3 (grid and cathode) would have restored the audio with probably very little difference in audio quality.
excellent vid. Actually,
i'd actually build an amplifier with only tubes for my desktop, a stereo / surround kind, since i got a lot of good tubes from an old, rusty Philips scope. but the PCB design with LEDS for fanciness is not bad, I might keep the idea, but with amber leds. that would make something beautiful. no brand, just a few knobs, volume/tone/input
"choob"? Hadn't seen that before. Funny.
Fun experiment: replace each "choob" with a jumper wire from in to out. See if the thing still works. Looks like it would.
I like valves for there retro appeal and historical value, unsurprisingly it is more just eye candy. I would have to remove the blue LED's, kind of look out of place on a valve.
+TheEPROM9 Orange LED would be better.
Makes it look like gassy (air leak)
+TheEPROM9 Yeah, kind of sick of everything having blue LEDs. They look cheesy and crap.
Blue LED's have there place, but it is not in everything.
+TheEPROM9 The blue LED craze started in the late 1990s, almost every single bling bling black plastic crap electronic gadget were full of blue LEDs. Remember the color LED computer fans? yea... they had their day.
I'm quite surprised... I saw this in the previous mailbag and thought the valves were just fake and made to glow and not part of the circuit.... but they do actually do something. In the CF configuration do they introduce a distortion that can be perceived? Does it sound like something that could be construed as "Tube Sound"? It would be interesting to follow this up with some time domain analysis, what sort of distortion etc?
So basically this is a tube unity gain buffer followed by parallel op-amp unity gain buffers. I think I'll keep plugging my headphones directly into my phone and save $50.
+mipmipmipmipmip More like lose $500 because you're listening to your music with vastly subpar headphones. That said, such a headphone requires actual gain, not a buffer.
+FlyingShotsman Most phone outputs are single miniature low power opamps - new ones, barring GSM noise pickup, are much better than this misused NE5532.
yep, the valve is just a high impedance buffer....
a proper 'all valve' headphone amp could be done very easily, and surprisingly cheaply,
without all that bullshit in the things in the video....
The dual op amp is being used as an amp with a buffer following it, for increased output current and stability. That's where the amplification is coming from. Since they are socketed you could easily replace both op amps with something like an OP2134 or OP275 for better performance, especially with 600 ohm headphones. But the crappy tube is likely to be the limiting factor in the noise floor.
I was surprised to output at the cathode was that clean and linear (minus the switch mode noise.) The tubes were operating in starvation mode. I was expecting some soft clipping on the negative swing of the sine wave.
Guys and hopefully girls, the tube is there to glow and add the warm-up effect when you start the amp. The blue led fucks up the glow part of it's purpose so you only end up with the warm-up effect. And worse characteristics amplifier.
The crazy thing is that after half a century of valves which cannot possibly be described in terms of 'conventional current' we have a return to wrong-way-round diagrams with transistors.
I might have this wrong, but i think it's not about distortion, it's about "tube sound." They add warmth to the audio signal. It's an audiophile term. So, does this amp do that? Only a professional audio enthusiast would be able to tell. Dave, you don't strike me as one. :)
You do realize that the "warmth" you speak of is the product of an innate alteration applied to the original source audio by the tube, mostly harmonics and non-linearities -- the very definition of "distortion". So it is, in fact, all about distortion.
That said, there is nothing wrong with preferring a certain sound to one's music, just so long as one realizes that any alteration of the input source is, in fact, a distortion of that source. The problem is when egos, and sellers looking to exploit those with far more money than sense, can not acknowledge that the "warmth" is what it is, distortion -- desirable, or not, it is what it is.
Ethan Poole Any alteration is distortion, but distortion has a strong negative connotation. When someone says distortion, I immediately think "clipping." But that's not what you're saying, and that's not what I'm saying either.
But but but... tubes sound better.... WHEN SMASHED AGAINST THE WALL!... A ceramic package only makes a soft "ting" noise...
LOL the Xuanzu Headphone amp! It used to be an ebay bestseller for sometime, though the design was really crappy. And the tubes are made by SGEL, not by syvania, which is more expensive.
Interesting video along with vacuum tube theory!
You should pay Doug royalties for the "JFets with pilot lights".
Maybe a video on good coupling practices? i.e. by-passing caps and AC/DC coupling/decoupling. Would be something useful for young players! :)