they make a stronger blade, it also has l/R angle control, 10 years ago I bought that 1, it worked great, could even be used for light dirt moving, yeah I moved a LOT of dirt, broke the rear axle, bent the plow mounts but that thing took a pounding, still cutting grass with it
keepin'itcountry on one of your videos on the muccolch eager never chainsaw,I had the same chainsaw, but it won't idle.So I Ajusted the carburetor and it works now.😀
SUPERHEROPVPER 10020 my great grandpa and I fixed it up and needed it more than I did! Haha, hopefully I'll be able to make another video soon... I do have one coming out in a few
Usually on a gravel drive way it is better to pack the first snow fall to secure the gravel then once the snow base is there it will be a lot easier and less mess to clean up in spring. Especially if you are going to use a snow blower. Learn't this by experience after taking out two windows in the sunroom. ...hee hee. Or at least raise up the plow by adjusting the side legs to now plow so low for the first couple of snow falls. Just saying.
Was it a pain in the ass to install ? Have the whole kit but no chains for the back wheels so i figure whats the point till i get those chains . I just want to know if it's a project or a 2 hour or less install ? thanks for any input
Chains are good if you use turf tires to get grip but you need weight in the back wheel weight water in tires or something to weight it down in the back. Well the first time it's quite a bitch( 2-4 hours) but after it's only about cotterpins and 2 bolts. 20 min install max.
@@jonathanerickson2007 Jonathan I don't know if you were referring to me but you can go on the internet and get all the information for a plow for your particular mower. If you're having trouble let me know and I will help you!
You are so wasting your time....like me pretty soon lol....can't wait, but I'll hopefully wait till we have a little more snow on the ground to plow than you have there lol
That looks like Steph Curry… For some reason it does it look like this or is that effective? Is he doing something wrong, is his driveway not level, or does this blade suck?
You be very careful with them clothes if you want if they get abused too much the holes wear out and they won't hold up anymore and then you can't turn them either so good luck with it and I hope it works out for you
Would've been more efficient to go up and down the driveway vs across the whole way through. Start from the top of the driveway then push it across the street. Would've been way more efficient
It's illegal to push across roadways. $250.00 fine where I'm at. Not allowed to push into ditches either. I guess 2 guys last year for doing it not once but twice. It's even in their contracts along with any fines,fees,cost. For doing so is their responsibility not the company's.
Looking at your tractor's hood is boring, bring your video up. You don't have enough weight on the rear, you should build a shelf in the back that you could add weight like a large bucket of ice water.
Need to add some skid shoes on there or your going to screw up that blade. That and we don't even touch a drive way unless there's more then 2 and a half inches of snow. Been running a plow company for couple years nw
It looked like you were hitting some gravel in the video. Bring your bladeup to about 3/8ths or 1/2 this way your not bouncing that blade all over. This way you can still plow but smoother and. It so hard on the blade and tractor. Or with that type of system you should be able to just put some presser on the handle and bring it up some again to get over that gravel.
It's all trail and error. Once you've been plowing as long as I have you start to pick up on things. Like the sound of that blade. I can tell it's bouncing all over and to low. You want to get low enough to do the job but not damage the blade.etc smooth and steady. Once I start hearing that sound in my truck I raise the blade up little at a time. Also make sure your running the right weight oil in that tractor for winter. Helps it run smoother and start better.etc
Mr. Williams i have a similar set up for my John Deere d105 and it works great in 3” or less. The transmission on my lawn tractor can only handle that much. Overall for the $600 I spent on the plow, chains, and weights it was totally worth it. The key is to start plowing before it accumulates past 3”.
Dont do this in heavy snow not with a basic lawn tractor if you are buying one its not worth it unless you REALLY want to plow and have a tractor already
i can say u dont know really what your doing lol
I can say you don't know grammar.
Why is Stephen Curry plowing his own driveway
Hahaha that wss good
Nice tractor, looks like it could use some weights on the back. Your method for plowing also needs some work.
they make a stronger blade, it also has l/R angle control, 10 years ago I bought that 1, it worked great, could even be used for light dirt moving, yeah I moved a LOT of dirt, broke the rear axle, bent the plow mounts but that thing took a pounding, still cutting grass with it
Cool plow, I have the same mower so will definitely consider it. But not for this much snow. 😂😂
Just for all the haters information this is how my mom wanted it done...
ha ha, she is the boss. I have to admit. Not the best way to do it (no that I know how to but I can tell). Still fun to watch. Thanks for sharing.
Slow down, think plan ahead ,you're working yourself and the machine way too hard ...EASY!
Nice and smooth just like steph curry
I like your plow I want a plow like yours because I don't have one
All I wanna know is why rich ass Stephen Curry plowing his own snow?
I would recommend tightening that bolt on the top of the plow or it will fold over all the time.
Gotta learn how to first
glad I watched before buying. not buying now.
Wow just wow that's 8:28 that I'll never get back
Nice video
SUPERHEROPVPER 10020 thanks man! Subscribe for more!
keepin'itcountry on one of your videos on the muccolch eager never chainsaw,I had the same chainsaw, but it won't idle.So I Ajusted the carburetor and it works now.😀
SUPERHEROPVPER 10020 my great grandpa and I fixed it up and needed it more than I did! Haha, hopefully I'll be able to make another video soon... I do have one coming out in a few
keepin'itcountry thank you
Why shovel right in front of the plow?
Usually on a gravel drive way it is better to pack the first snow fall to secure the gravel then once the snow base is there it will be a lot easier and less mess to clean up in spring. Especially if you are going to use a snow blower. Learn't this by experience after taking out two windows in the sunroom. ...hee hee. Or at least raise up the plow by adjusting the side legs to now plow so low for the first couple of snow falls. Just saying.
sheesh why bother to plow such a tiny snowfall
@Nimbus Nimbus it would push more it isn't that weak
@Nimbus Nimbus ohhhhh no it isnt
@Nimbus Nimbus OK then maby not that one then but slot can
Was it a pain in the ass to install ? Have the whole kit but no chains for the back wheels so i figure whats the point till i get those chains . I just want to know if it's a project or a 2 hour or less install ? thanks for any input
Chains are good if you use turf tires to get grip but you need weight in the back wheel weight water in tires or something to weight it down in the back.
Well the first time it's quite a bitch( 2-4 hours) but after it's only about cotterpins and 2 bolts. 20 min install max.
Nothing worse than a gravel driveway!
How much did you pay for your plow because I'm looking for a plow for my lawnmower
@@jonathanerickson2007 depending roughly $350 and well worth it!!!
Hear is my phone number so you can call me 1(315)414- 88- 60 that's my number ok
What is your name plz?
@@jonathanerickson2007 Jonathan I don't know if you were referring to me but you can go on the internet and get all the information for a plow for your particular mower. If you're having trouble let me know and I will help you!
Shovel girl would get it though
You are so wasting your time....like me pretty soon lol....can't wait, but I'll hopefully wait till we have a little more snow on the ground to plow than you have there lol
Helps when you're smarter then the snow plow.. That poor girl..
I used to have one of those. It is not suitable for that amount of snow. It becomes too weak. You'll need awd rider.
That looks like Steph Curry… For some reason it does it look like this or is that effective? Is he doing something wrong, is his driveway not level, or does this blade suck?
Just used the snow thrower instead 😅
You be very careful with them clothes if you want if they get abused too much the holes wear out and they won't hold up anymore and then you can't turn them either so good luck with it and I hope it works out for you
What are you suppose to be plowing? This looks like someone from Florida in their first time in the snow lol
Snow thrower attachment > snow blade for sure.
They cost more than the mower
Would've been more efficient to go up and down the driveway vs across the whole way through. Start from the top of the driveway then push it across the street. Would've been way more efficient
It's illegal to push across roadways. $250.00 fine where I'm at. Not allowed to push into ditches either. I guess 2 guys last year for doing it not once but twice. It's even in their contracts along with any fines,fees,cost. For doing so is their responsibility not the company's.
The plow got no blade skids
I don’t think you have a clue what your doing
The blade seems to move too much.
What the hell is he doing ?"
Looking at your tractor's hood is boring, bring your video up. You don't have enough weight on the rear, you should build a shelf in the back that you could add weight like a large bucket of ice water.
How much did you pay for your plow? Because I don't have a plow
Around 300
It's Dec. 2021 now , I guess you've figured out the limitations of putting a snow plow on that lighter duty riding mower , lol ...
Plowing in Canada.
ur kidding right ,dont tell me u have a 2wh drv truck too???in da snow omg ty video
oly o kid grow up a little before commenting so people can figure out what you are saying
I have a 4wd truck
Where's your gloves. Want frostbite
Need to add some skid shoes on there or your going to screw up that blade. That and we don't even touch a drive way unless there's more then 2 and a half inches of snow. Been running a plow company for couple years nw
Tony Howell what height do you recommend?
Tony Howell I put mine at 1/2 under the blade. Is that to high?!
It looked like you were hitting some gravel in the video. Bring your bladeup to about 3/8ths or 1/2 this way your not bouncing that blade all over. This way you can still plow but smoother and. It so hard on the blade and tractor. Or with that type of system you should be able to just put some presser on the handle and bring it up some again to get over that gravel.
It's all trail and error. Once you've been plowing as long as I have you start to pick up on things. Like the sound of that blade. I can tell it's bouncing all over and to low. You want to get low enough to do the job but not damage the blade.etc smooth and steady. Once I start hearing that sound in my truck I raise the blade up little at a time. Also make sure your running the right weight oil in that tractor for winter. Helps it run smoother and start better.etc
Hope you have a snowblower for a real dump of snow. Because the plow not gonna cut it
Its not snow to plow dude. Just dirt
Dang bro, simmer down on those 0.5" ragers. You'll pull a hemi.
How does it do in heavy snow? Can anyone tell me? I am looking in to purchasing one.
Mr. Williams i have a similar set up for my John Deere d105 and it works great in 3” or less. The transmission on my lawn tractor can only handle that much.
Overall for the $600 I spent on the plow, chains, and weights it was totally worth it.
The key is to start plowing before it accumulates past 3”.
Dont do this in heavy snow not with a basic lawn tractor if you are buying one its not worth it unless you REALLY want to plow and have a tractor already
Steph curry :P
It sounds like rubber on the blade gone hours ago :)
That blade is so fucking flimsy
Waste of time!
momas boy
Doing what she asks of me to do is a mama's boy? Lmao ok...
66gUhr bzo
Thats what happens when your Mother marries her Brother you have a inbreed kid#wormsperm
Thanks for the hate! Also thanks for the view
@@johndeere211 No problem the hate was free but the time I wasted watching your video I will never get back.
I would think telling this kid a better way to use the equipment would be a more productive use of time, but whatever.
Lmao that thing is junk
D Mario how