Tension Rod Upgrade For Older Hegner Scroll Saws
Вставка
- Опубліковано 28 сер 2024
- In this video I will show the installation and use of the Quick Lock Tension Rod for Hegner Scroll Saws. This upgrade is for older Hegner saws and is a great improvement in the operation of the saw.
Quick Lock Tension Rod: advanced-machi...
Advanced Machinery Site: advanced-machi...
Advance Machinery Contact: 800.727.6553
Advance Machinery email: wolfgang@advmachinery.com
My email: paulsmessyworkshop@gmail.com
Very informative and well done video. My Hegner is the later one with built in tension release and it is brilliant, however I agree with you entirely that a quick tension release is essential especially when doing fretwork with internal cuts. If anyone has a Hegner without a quick tension release fitted; the new part featured in this video would be one of the best investments you could make in your workshop, saving a massive amount of time. Top marks for your video.
scrimperuk, Thanks for taking the time to watch my video and for leaving the very nice comment. The Hegner saw is a great piece of equipment and when you can do this upgrade to the older saws it really makes a difference. Happy scrolling....
What a fantastic upgrade to that saw Paul. That old system looked like a complete pain in the butt to be doing any type of fretwork but with the new modification, I can see how it will go a long way to making fretwork enjoyable for you. Thanks for sharing this upgrade with us. Absolutely fantastic modification
Ken, thanks my friend. Now I should be able to tackle some more difficult projects and not waste so much time tensioning the blade. Thanks for watching and leaving the nice comment.
What a great, yet simple modification. Wish it'd been around for my first Hegner. Now I have the front tensioner, so don't need it, but I remain impressed.
Kelly, thanks for watching and for the comment. Nice to have a fellow Hegner owner watching.
I did the same ugrade with mine 30 year old hegner scrollsaw... and it is a world of difference
Thanks for taking the time to watch my video. This upgrade sure does "modernize" an older saw. I am glad you had good luck with the modification also. Paul
I will be ordering one today. Thanks for the video
Thanks Paul for this video. I also wanted to upgrade my saw so I ordered this upgrade. The thing I like about this is I can put more tension on the blade by turning the lever a half turn before flipping the lever. No other blade release will do this.
Roger, this has been a great upgrade to my saw and I hope you find it equally helpful for you. Thanks for taking the time to tune in.
Thanks for the tutorial on fitting the tension rod. Well put together really appreciate your time. UK
ziggydog24, glad you found the video about the tension rod helpful. It sure is an improvement to the older Hegners. Thanks for taking the time to watch and comment.
Thank you for your video, ordered mine today and wow what service Hegner uk best sales phone call ever back to the old days, wouldnt have known without your video Thanks keep up good work
David, thanks for the kind words. I am glad you had such a positive experience with Hegner, they are great people to deal with. Thanks for taking the time to watch and comment. Happy scrolling!!!
@@paulsmessyworkshop just bought foot switch from amazon 12.95 delivered. Fitted 20 mins works ok cheaper than 160 from Hegner.sorry Hegner.
The thread on rod short but Hegner did say it might be Older machine pre 95. Just added some washers ,now have made new thread. Sorted.
David, using a foot switch does make using a scroll saw a whole lot nicer. Too bad the Hegner accessories are so expensive.
@@paulsmessyworkshop yes Paul but dont feel too bad the other items were £70+ from Hegner and I still endorse their saw and wonderful tech support sure they understand we all cant afford everything.
That's a huge improvement! I know it's going to make the saw much more enjoyable to use.
Steve, I can't even begin to tell how how much more enjoyable that saw is to use. Thanks for watching and taking the time to comment. Paul
I ordered and installed it. Good news thank you for the super good info. I call advanced machinery and she told me the top arm would work just fine with no induced vibrations. I was thinking about getting one but I could almost buy a used hegner with the new arms for about the price of two arms.
Moonie, I am surprised that they told you there was no problem installing the updated upper arm, the rep that I dealt with told me just the opposite. Oh well, big business, right? You are right about the arms being expensive. That is probably one of the things that aggravates me the most about my Hegner is the price of parts and accessories. Thanks for taking the time to watch and comment.
very interesting video. i just dug my grandfathers Hegner multicut 2 that i inherited out of the basement and would like to restore it but know nothing about scroll saws. would you ever be interested in making a video going over the parts, functions, and basic proper use of a Hegner scroll saw?
THANKS
Richard, Glad this was of value to you. Thanks for watching and for your comment.
I just bought my third Hegner and I upgraded all of them with the quick release and the quick clamp for the blades (with the aluminium knob). Both these upgrades make them a joy to use and are absolutely necessary imo, especially when doing alot of inside fretwork and blade changes.
I have upgraded to the newer upper clamps with the aluminum knob but removed the knob and replaced that with a lever. I like that a lot better, easier on my hands. Hegner makes a great saw. Thanks for your input and sorry it took so long for me to reply.
Thanks for this video. I bought the upgrade rod. In a way I think it's a better option than the front lever. Any extra weight will create more vibration. (Newton's First Law)
mosfet500, I agree. The upgraded rod works great. No regrets. Thanks for the comment.
I have a Draper made scroll saw would that same tension bar work on my scrolsaw
hi i'm mega from indonesia .. i really like your video, can you help me where i can get what you have to replace my damaged tensio
Mega astria gani, I hope this helps you out.... here is the web address to obtain the Quick Lock Tension Rod: advanced-machinery.myshopify.com/products/m14-e-m2-part-number-012l-quick-release-tension-rod-1 Hopefully this will get you the information you need. If not, please feel free to email me at: paulsmessyworkshop@gmail.com Thanks for watching and taking the time to comment.
Thank you so much 🙏
Paul do you know if this attachment fits any other scroll saws? I have a Cental Machinery 16” scroll saw with the exact tension knob system that you had before you upgraded. That would make inside cuts so much easier.
Roy, since this tension rod is made by and for the Hegner saw I doubt if it would work on ones made by other companies. For the price, about $65, I don't think I would want to try. At least knowing what it looks like you might be able to fabricate your own. Good luck and thanks for watching.
paulsmessyworkshop could you attach some close up pics or video of the tension rod? I appreciate your response.
Roy, please email me at: paulsmessyworkshop@gmail.com and I will be happy to email them to you. It is just easier in an email than here.
Now they sell the whole upper arm with the lever tensioner on the front end of the arm , like the new ones have on them . The price is $ 179.95 You can order the same rear tensioner rod assembly in this video part no. O12L for $64.95 also
So , basically you have two choices , rear tension rod and spring assembly or more convenient front tensioner lever on a replacement upper arm . Either way it definetly speeds up blade changing and inside cutting speed . What we're all after . Much more enjoyable cutting on our saws .
Carl, I appreciate your information. When I replaced the rear tensioner I was told by Hegner that replacing the upper arm might not be a good idea on my saw. My saw is quite old, a 1984 model. The concern at that time was that the extra weight might cause extra vibration hence extra wear on the bushings. Also this was a video I did in combination with Hegner, they supplied the tensioner and I did the video more or less as an instruction and information on how to do the swap. At a future date I still may replace the upper arm with the newer version to see how it works out. I appreciate your watching and for providing the good information. One thing for sure, Hegner makes a great saw.
Please sir , my scroll saw tension my blades, has broken , were could I find another one just like you own
Rose, thanks for taking the time to watch my video and to leave the comment. If I understand your post correctly the part that tensions the blade on your saw has broken. If it is a Hegner and you need a replacement you can get one like mine by contacting Hegner via the information in the description below the video. If you wanted to purchase a saw like mine (a great choice by the way), you can contact Advanced Machinery via the link in the description below the video or at: advanced-machinery.myshopify.com/pages/frontpage Just an added piece of information, the people at Advanced Machinery are great to deal with. If you end up purchasing a Hegner I am sure you will be very satisfied with it. I hope this helped. Please contact me at paulsmessyworkshop@gmail.com if I can help.
Thank you so much,
Can you please tell me the dimensions of the part? Length , distance between the steel prisims,etc? I believe this part may fit my old Craftsman scroll saw but I need to know the dimensions and they are not listed on the website. Thanks in advance.
Jay, the rod is about 1/4" in diameter. The overall length is right around 7" and the bottom 2" are threaded. The distance between the two prisms can range from about 4 1/4" to about 5 1/4". I would have to take my saw apart to give you exact measurements. If you need more information, email me at paulsmessyworkshop@gmail.com and I will try to help you out. Thanks for taking the time to watch and comment. I hope this information helps.
Paul What is the price of the Quick Lock Tension Rod for the 14E saw
jorjsal, I tried checking the website for Advance Machinery and I couldn't locate the Quick Lock Tension Rod on their site. I would suggest you email them at: wolfgang@advmachinery.com or call them at: 800.727.6553. They are very responsive and will answer all of your questions. Sorry I wasn't able to provide the information. Thanks for watching my video and leaving the comment.
AROUND sixty-four dollars ($64.00).
Now as of 2020 on their site they sell the upper arm with the quick release lever same as the new ones . The price of the new arm with quick release is $179.00
👍
To bad the same cannot be said about the old craftsman.
Changing the blade is a nightmare.
You - Tube Junkie. I know what you mean. I have run into very few tools that couldn't benefit from some minor design changes. Thanks for taking the time to watch and comment. Happy woodworking.
Xellent
DKDonson, Thanks for the comment and taking the time to watch my videos.
You see, I have a chance to buy a hegner, and that rod is what is missing. Thank you.
I am really glad the video helped.
6:09 to 6:30 video being cut to make it look real fast i don't know why you would do that
jrgal27, I rewatched the video and I don't understand your comment. At that particular point in the video I was making test cuts in a small piece of plywood. They were just small cuts more to test how the new tension rod worked than to cut much wood. I think at the most the cuts were about 3/4 of an inch long. The video was not sped up. If you have any other comments or would like to discuss this further please email me at paulsmessyworkshop@gmail.com or leave an additional comment here. I appreciate your taking the time to watch the video and for leaving your comment.
i beleive this modification is very good but at 6:18 can you explain why the tensioner jumps up itself if like you say you have not messed with the video and you can clearly see the video jumping sometimes when you replace the blade and it tightens itself 6:24