Very well done. I like! I have the same train. I have a request for a little more detail on connecting the LED lighting. I want to put one up myself. Can you provide a little more detail about the connection method and the components you are using? Any wiring diagram?
Hello! I don't have any drawing, but the point is: the interior light is soldered to the AUX1 F1 output to the PCB of the model. This function was not used originally. For me the motorised bord restaurant is in the middle of the 5 piece unit. For one direction I was able to use the original Piko electric plugs between the units, because the electric pick up is comint from only one head unit. So just like the AUX 1 output (green cable at the decoder) this one was also perfectly useable. However, for the other head unit direction all of the electric wires are used , so you have to add 2 additional pole, that I solved with mini plugs. You will need a resistor too, that you have to add to the LED stripe circuit. This is the principle, if it's too complicated, write me an email, and I will try to help you!
Incredible job. Does the interior already come like that with seats and tables or did you just add the lighting, pedestrians, table lambs, and the paint jobs?
It's exactly the other way around. The original, non-Redesign 403 only had a 'BordBistro' with normal passenger seats and not a proper sit-down restaurant area, while the Redesign 403's have a proper, red sit-down restaurant :)
@@lars3321 , Some of the model shops offer metal parts which can be even more realistic, like this: www.modellbahnzentrum-uerdingen.de/h0-d-db-zubehoer-aetzteile-bremsscheiben-ice3-40x.html?language=de
Rengeteget dobtak rajta ezek az apró részletek! Tetszetős lett.
Very well done. I like! I have the same train. I have a request for a little more detail on connecting the LED lighting. I want to put one up myself. Can you provide a little more detail about the connection method and the components you are using? Any wiring diagram?
Hello! I don't have any drawing, but the point is: the interior light is soldered to the AUX1 F1 output to the PCB of the model. This function was not used originally. For me the motorised bord restaurant is in the middle of the 5 piece unit. For one direction I was able to use the original Piko electric plugs between the units, because the electric pick up is comint from only one head unit. So just like the AUX 1 output (green cable at the decoder) this one was also perfectly useable. However, for the other head unit direction all of the electric wires are used , so you have to add 2 additional pole, that I solved with mini plugs. You will need a resistor too, that you have to add to the LED stripe circuit. This is the principle, if it's too complicated, write me an email, and I will try to help you!
Thanks for answer!
Well done sir! 😎👍
super👍
Incredible job. Does the interior already come like that with seats and tables or did you just add the lighting, pedestrians, table lambs, and the paint jobs?
Originally it's one part the complete interior and blue. Yes as you said, I added the lights, the passangers, and painted them.
Awesome!
Thanks a lot!
complimenti bravo
Szia! Az áramszedő milyen gyártmányú, és mennyire kellet faragni hogy helyére illeszkedjen a réginek?
Szia! Piko az is, a leírásba írtam cikkszámot is hozzá, nem kellett egyáltalán faragni, felment a helyére.
It looks so good. Great Job🎉 From where did you get the Pantogtaphs because i need 2 of this for my ICE 3😢😊😮
Look at the description of the video, I made a list from the materials :)
In fact, the board bistro on most refurbished ICE 3´s is in fact blue. only some small bits are still red.
I modeled the original one:
de.wikipedia.org/wiki/Datei:ICE3_BordBistro.JPG
It's exactly the other way around. The original, non-Redesign 403 only had a 'BordBistro' with normal passenger seats and not a proper sit-down restaurant area, while the Redesign 403's have a proper, red sit-down restaurant :)
@@mittenpulstaktung You really are everywhere aren't you
Can i buy those 3d printed disk imitations somewhere?
No, I made it myself.
@@danielszakaly okay thanks, looks great
@@lars3321 , Some of the model shops offer metal parts which can be even more realistic, like this: www.modellbahnzentrum-uerdingen.de/h0-d-db-zubehoer-aetzteile-bremsscheiben-ice3-40x.html?language=de
@@danielszakaly oh thank you so much!! ill definitely buy that
Hello,
Where can i find the 3d printed Files ?
Hello, I created them myself, but not so complicated, just a couple of circles :)
Is that a Piko Talent 2?
Yes, at the end of the video, you can see the Piko Talent 2 for a short period of time
Look like märklin now!
I didn't see that version yet in real life, but it can happen :)
@@danielszakaly or you just have the best camera because i am saving up for a piko or roco ICE